Lamination film

Lamination film — in everyday speech, “laminating paper” — covers My Print pouches and rolls for hot (thermal) lamination: A5, A4 and A3 formats (glossy, 80–150 µm thick, 100 pcs per pack) and 0.32×200 m rolls in glossy, matte and holographic finishes. They work with heat in a laminator and give documents, photos and printed materials strong, water-resistant protection.

Below: how to choose between pouches and a roll, which thickness (density) to take for your task, whether A4 or A3 lamination film fits your laminator, and how hot lamination differs from cold.

    Sorting:
    Hotlamination in a laminator
    80–⁠150 µmpouch thickness
    A5 · A4 · A3pouch formats
    Roll 0.32×200 mfor print runs
    3 finishesglossy, matte, holographic

    What it is and what it’s for

    In short: for individual documents, photos and badges, take pouches in the format (A5/A4/A3) and thickness (80–⁠150 µm) you need: put the item in, run it through a pouch laminator — and you get an item heat-sealed on all sides: flexible in an 80 µm pouch and rigid like a card in 150 µm. For large runs and long or wide formats, take a 0.32×200 m roll for a roll laminator (glossy, matte or holographic finish). All of this is hot lamination — a strong, water-resistant result; for heat-sensitive prints, choose cold film.

    What it’s called: film, pouches or laminating paper

    Lamination film, laminating film

    Both the pouches and the roll film of this category go by these names. Buyers also search for it as “laminated film”, “A4 laminating film” or “laminator film” — it is film for hot (thermal) lamination.

    Laminating pouches, pouch film

    Ready-made pouches for a pouch laminator. In the table below, these are the A5, A4 and A3 rows — with the size of each pouch and links to the products.

    Laminating paper, sheets or blanks

    That is what people commonly call the same pouches: anyone searching for “laminating paper A4 80 µm” is looking for an A4 pouch, 80 µm thick.

    Pouches or a roll

    Pouches

    Ready-made two-sided pockets: put the item in, run it through a pouch laminator — and you get a fully heat-sealed, water-resistant card.

    Roll

    Continuous film for a roll laminator: large runs and long or wide formats, bigger than a sheet.

    Which film thickness (density)

    80 µm

    The thinnest and most flexible — for documents, menus and materials that get leafed through often.

    100 µm

    All-purpose — certificates, diplomas, price lists and instructions.

    125 µm

    Denser, holds its shape — badges, signs and reusable materials.

    150 µm

    The most rigid, like a plastic card — passes, ID badges and cards.

    The density in the pouch names is the film thickness in microns (µm), from 80 to 150 µm: the bigger the number, the stiffer the result.

    Lamination film comparison

    Values are taken from our product pages; the links in the “Thickness” column open the product pages.

    FormFormat / SizeThicknessSurfacePer packMethodBest for (when to choose)
    PouchesA5 · 154×216 mm80 · 100 · 125 · 150 µmGlossy100 pcsHot, pouch laminatorPhotos, small documents, A5 badges
    PouchesA4 · 216×303 mm80 · 100 · 125 · 150 µmGlossy100 pcsHot, pouch laminatorDocuments, menus, certificates, instructions
    PouchesA3 · 303×426 mm80 · 100 · 125 · 150 µmGlossy100 pcsHot, pouch laminatorPosters, drawings, large menus
    Roll0.32×200 m25 µmGlossy1 rollHot, roll laminatorLarge runs, bright glossy protection: gloss brings out color saturation
    Roll0.32×200 m25 µmMatte1 rollHot, roll laminatorRuns with a matte surface: it removes glare and is easy to read
    Roll0.32×200 m25 µmHolographic1 rollHot, roll laminatorDecor, advertising, souvenirs: a holographic rainbow shimmer

    Hot or cold lamination

    Hot lamination

    Film with a heat-activated adhesive bonds to the print through the laminator’s heat and pressure: a strong, water-resistant layer on the print surface. You need a laminator with a hot mode.

    Cold lamination

    Self-adhesive film suits photos and heat-sensitive materials. Go to cold film ›

    Who needs which film

    Office & paperwork

    Certificates, passes, instructions and orders.

    A4 pouches, 100 µm — for flexible documents; 125–⁠150 µm — for a rigid, neat look.

    Cafés, shops, services

    Menus, price lists and price tags that withstand moisture and frequent use.

    A4/A3 pouches or a roll for a print run.

    Advertising, photos & decor

    Posters, photographs and souvenirs.

    A roll (including holographic) and large A3 formats.

    How to choose and laminate: 5 steps

    Laminating paper in a pouch laminator — from choosing the pouch to cooling. Steps 3–⁠5 follow our pouch product pages and pouch laminator manuals.

    Check your laminator
    In the laminator’s specifications, find the format (A4 or A3) and the film thickness it accepts.
    Choose the pouch and thickness
    An A5, A4 or A3 pouch — to match the sheet format; a thickness from 80 to 150 µm — by the cards above, within your laminator’s range.
    Insert the sheet
    Place the sheet in the center of the pouch, right against the sealed edge, with even margins — a photo paper manufacturer advises a border of at least 1/8 inch (about 3 mm) on every side. Remove staples and paper clips beforehand.
    Key step
    Feed it sealed edge first
    Once the laminator has heated up to its working mode, guide the pouch straight and centered in the slot.
    Let it cool
    Take the pouch from the exit right away and lay it on a flat surface until it cools.

    A roll is loaded into a roll laminator, the working mode is set and the print is fed evenly — as the roll product pages describe.

    Tip. Before hot lamination, make sure the print is completely dry: for inkjet prints, a photo paper manufacturer advises at least 24 hours. Check the document before laminating — the heat-activated adhesive bonds the film firmly to the paper.
    We’ll help you choose and buy lamination film

    Write to us: the format you need (A5 / A4 / A3 or a roll), the approximate volume, the thickness (80–⁠150 µm) and whether you have a laminator (pouch or roll) — we’ll pick the film, and a laminator too if needed. We ship with Nova Poshta and Ukrposhta to any city in Ukraine.

    Related categories

    FAQ about "Lamination consumables":

    According to the recommendations of laminator and film manufacturers, after hot lamination the heat-activated adhesive sets as it cools: a heat-laminated item then lasts longer and is less likely to separate — the choice for documents that can take heat. Cold self-adhesive film is the choice for anything heat-sensitive — look for it in the “Cold lamination film” section.

    Check two figures in your laminator’s specifications: the entry width and the film thickness it accepts. For example, pouch laminator manuals list an entry of 240 mm on the A4 model and 325 mm on the A3 model with 80–125 µm film per side, and another series lists 240 and 317 mm with 75–125 µm film. The pouch must be narrower than the entry: the width of each of our pouches is given in the table above. More in the article “125 µm pouches and thick paper: two laminator limits”; send us the model of your pouch laminator and we’ll tell you which pouches it takes. Send us the model of your roll laminator and we’ll check whether the roll fits.

    Photos — yes: they are among the uses of pouches in all four thicknesses. For heat-sensitive prints, including tickets and ultrasound images, choose cold self-adhesive film — as pouch laminator manuals advise. According to the recommendations of laminator and film manufacturers, cold lamination is best for photographs and prints with heavy ink coverage. For old photo prints, a photo paper manufacturer advises scanning them first and laminating the copy. Test a valuable photo on a trial copy — pouch laminator manuals advise a test pass before laminating.

    If your model’s manual provides for removing the pouch by hand with the Release lever, press the lever and gently pull the pouch out through the entry slot. According to pouch laminator manuals, the causes are these: the pouch was fed open end first, at an angle or off center, or an empty pouch was run through. Step-by-step guidance, with reverse and the lever, is in our article “Laminator jam: how to get the pouch out”; for your model, message us — we’ll help.

    By hand, you laminate with cold self-adhesive film: press it down and smooth it with a squeegee from the center to the edges. For print runs, you can use a cold laminator. Look for this film in A4 and A3 in the “Cold lamination film” section.

    Before laminating an original certificate, diploma or ID card, check the requirements of the institution you will submit it to. For everyday use, it is handy to laminate a copy.

    Yes. According to pouch laminator manuals, excess film around the item is trimmed after lamination, once it has cooled, and the roll web is cut to the size you need — a step from our roll product pages. How to lay out and cut cards and badges so the edge stays sealed is in the article “When to cut laminated cards”. Cutters are in the “Paper cutters” section, corner rounders in the “Die-cuts, corner rounders, hole punches” section.