Covers for sublimation 2D silicone (tpu) with a metal plate

2D Sublimation Cases consist of a case with silicone edges and a metal plate that attaches to the back panel. Sublimation cases can be made from various materials. Although most users prefer silicone products, which fit better on the phone, are more pleasant to the touch, and do not compromise on protecting the phone, plastic models are also available. Sublimation cases come with transparent, black, and white side edges. The case protects the phone from falls, scratches, and unsightly fingerprints on the body. In addition to providing safety, the case is a stylish accessory that attracts attention.

How to Print on a Sublimation Case?

Printing an image on a 2D case is done using a tablet heat press and takes only a few minutes.

1. Adapt the selected image to the size of the metal insert, which is made of sheet aluminum, and print it in mirror image using sublimation inks on special sublimation paper.
2. Turn on the heat press and let it heat up to 185 °C.
3. Remove the protective film from the metal insert, place the printed image face down. For better fixation, to prevent the image from moving, it is better to secure it with thermal tape. Then fold an A4 sheet of white paper in half and insert the blank inside.
4. Place the prepared plate with the sheet in the heat press and close the lid.
5. The transfer takes about 50-60 seconds. The transfer is carried out under the influence of high temperatures and increased pressure.
6. After the timer signal, remove the metal plate and peel off the paper.
7. Glue the prepared plate onto the sticky surface of the case, removing the protective film beforehand.

Thus, in a short period of time, you get an exclusive case that has no analogs.

You can buy sublimation cases wholesale for most models with delivery throughout Ukraine from us.