Printing equipment and materials

Printing equipment and materials — equipment for the printing industry and post-press finishing: laminators and lamination film, paper and metal cutters, binding machines and thermal binders, creasers, stamping foil, die-cutters and corner rounders, plus My Print photo paper for inkjet printers.

Below you will find what to buy for your task, how to put together a kit for an office, copy center, photo studio or small print shop, and answers to frequently asked questions.

Sorting:
16 sectionsequipment and materials for print finishing

Which printing equipment to choose for your task

In short: to protect a document, menu or photo — lamination; to print photos — photo paper; to cut paper or metal — a cutter; to bind a report or brochure — a binding machine, to make a book with a glued spine — a thermal binder; to fold a cover neatly or make a tear-off line — a creaser; to add gold or silver — foil; to cut out business cards and plastic cards and round their corners — a die-cutting press and a corner rounder.

What's in this section

How the equipment in each area works and which subsection to find it in.

Lamination

A laminator seals a sheet inside a hot laminating pouch on all sides — the surface becomes rigid and waterproof. Self-adhesive cold lamination film is safe for heat-sensitive materials: receipts, tickets, ultrasound scans. Roll laminators work with continuous roll film: the rollers press it onto the print across the full width.

Lamination film · Laminators · Cold lamination film · Roll Laminators

Photo paper

According to its product pages, My Print glossy photo paper is for inkjet printers with water-soluble inks: Epson, Canon, HP, Brother. Before you pick up a print or stack it, give it 10–⁠15 seconds, and dense dark fills a few minutes.

Photo paper for inkjet printers · Roll photo paper for printer

Cutting paper, metal and foil

A guillotine cuts a stack of paper with one stroke of the blade while the screw clamp holds the sheets tight; a saber cutter is handy for a few sheets, a rotary cutter for wide sheets. Sheet metal and foil have cutters of their own.

Paper cutters · Metal cutters · Foil cutter

Binding and bookbinding

Bookbinding machines are binding machines and thermal binders. A binding machine punches holes and fastens the block: with a plastic comb you can add or remove sheets at any time, a metal wire gives a presentable binding, a coil gives a modern look, and with each of them the brochure opens 360°. A thermal binder glues the spine with molten hot-melt glue. Binding equipment comes with a 12-month warranty.

Binding equipment · Binding consumables · Glue for thermal binders

Creasers and perforators

A creaser (creasing machine) presses in the line of the future fold so that heavy paper and covers fold straight and clean. A perforator makes a tear-off line.

Creasers and perforators

Foil stamping

Hot stamping foil comes in gold, silver and silver holographic; toner-sensitive foil also comes in gold holographic, rose gold, black, blue, green, red, rose and pink, and it is used to decorate business cards, invitations, certificates and covers. How stamping differs from foiling on a laminator — see the questions below.

Hot stamping foil · Foil for laminator (toner-sensitive)

Die-cuts, corner rounders, hole punches

A die-cutting press runs on a mechanical lever, and material is fed into it one piece at a time; corner rounders have interchangeable blades of different radii, and the L30 hole punch takes punch dies for different hole diameters. What die-cutting is and how to cut plastic cards — see the questions below.

Die-cuts, corner rounders, hole punches

What you need for each task

Sizes and specifications come from our product names and product pages.

TaskWhat you needSizes and specificationsSection
Laminate a document, menu or badgepouch film for hot lamination and a laminatorfilm A5, A4, A3; 80, 100, 125, 150 µm; 100 pcs per pack; A4 and A3 laminatorsLamination film · Laminators
Laminate posters from a rolla roll laminator with a hot mode and thermal filmthermal film 0.32 × 200 m: glossy, matte, holographic. Tell us your laminator model — we will check that the roll is compatibleRoll Laminators · Lamination film
Protect a photo or stickercold lamination filmA4 and A3, 20 sheets per pack; glossy, matte, holographic, texturedCold lamination film
Join A and B films for UV DTF, apply foila UV DTF foiling laminatorLH Base 300 — 30 cm; LH Base 600 and LH Pro 600 3 in 1 — 60 cmRoll Laminators
Print photosphoto paper10×15, A4, A3; 108–⁠300 g/⁠m², magnetic — 680 g/⁠m²; glossy, super glossy, matte, satin, double-sided, self-adhesive, magneticPhoto paper for inkjet printers
Print from a roll on an inkjet printer or plotterroll photo paper0.61; 0.914; 1.07; 1.27 × 30 m; 108–⁠260 g/⁠m²Roll photo paper for printer
Cut a stack of paper, trim a brochurea paper cutterguillotine and saber — A4 and A3; rotary — from 36 to 160 cm; electric PC Compact 320, ProCut 450, industrial PowerCut 480Paper cutters
Cut sheet metala metal guillotineXD-322 and Pro A4 — 32 cm, Pro A2 — 62 cmMetal cutters
Bind documents, a report or a study guidea binding machine; combs, wires or coils; coverscombs 6–⁠28 mm (21 loops); wires 3:1 — 6.4–⁠14.3 mm, 2:1 — 15.9 mm; coils 4:1 — 8–⁠25 mm; plastic covers 150, 180, 200 µm and cardboard covers 230 g/⁠m²Binding equipment · Binding consumables
Make a book, catalog or photo booka thermal binder and hot-melt gluethermal binders A4 and A3; spine up to 40 mm (TB Base 05) and up to 60 mm (TB Pro 60); EVA glue for the spine; pressure-sensitive BB Pro Side for side gluing on the TB Pro 60, paired with BB Pro Spine; pack size — 25 kgBinding equipment · Glue for thermal binders
Make a flip calendara calendar binding machine, 3:1 wire, calendar hanger (rail)WB Calendar 930: F4, A4, B5, A5, hanging hole; rails 150–⁠300 mmBinding equipment · Binding consumables
Fold a cover, postcard or menu neatly; perforate tickets and couponsa creaser; with perforation — CR Base 460-⁠P, CR Pro 500, CR Auto 350-⁠Pmanual CR Base (CR Base 460 — up to 400 g/⁠m²), electric CR Pro, automatic CR Auto 350-⁠P — up to 32 creases per sheetCreasers and perforators
Add gold or silver to laser printstoner-sensitive foil and a laminatorrolls 0.32 × 10 m and 0.32 × 30 mFoil for laminator (toner-sensitive)
Foil-stamp paper, leather or plastichot stamping foilrolls 0.64 × 120 m; for paper — SA and SV (strong adhesion), for leather — GB, for plastic — PV, PW, CVM, CWMHot stamping foil
Cut out business cards and plastic cards, round corners, punch a holea die-cutting press, a corner rounder, a hole punchpresses: PVC cards 86 × 54 mm, business cards 90 × 55 mm; blades R3–⁠R13; punch dies Ø3–⁠6 mmDie-cuts, corner rounders, hole punches

How to put together a kit

Based on the “For whom” label and the applications on our product pages.

Office equipment

Laminating documents, binding reports, trimming sheets.

An A4 laminator and A4 film; the CB Base 615 comb binder or the WB Base 619 wire binder — “home and small office” on their product pages; the 858 A4 guillotine.

Copy center equipment

Quick printing every day: lamination up to A3, brochures, postcards, cards.

An A3 laminator; the CC 2916 2-in-1 binder or the CL Base 628 coil binder and the TB Base 05 thermal binder — “office and copy center” on their product pages; the CR Pro 500 electric creaser; a corner rounder.

Photo studio equipment

Photo printing, ID photos, laminating prints.

Photo paper in sheets and rolls; a press for cutting business cards — ID photos are among its applications; a corner rounder; cold lamination film.

Print shop equipment

Print runs of brochures, books, calendars and postcards.

An electric cutter; the CR Auto 350-⁠P automatic creaser — for digital print shops, as its product page says; the TB Pro 60 A4 thermal binder for print shops and bindery departments; the WB Calendar 930 calendar binder; a roll laminator; foil.

How to choose: 4 steps

Start with the task
Find it in the table above: it lists what you need and the sizes from our product pages.
Check the format and width
For sheets — A4 or A3; for roll machines — the material width: the roll laminator pages advise that it should fit the working width with a margin at the edges.
Estimate the workload
For creasers and roll laminators, manual models are for tests and short runs, electric ones for regular series, and the CR Auto 350-⁠P automatic creaser for continuous flow: this is how our product pages describe them.
Add the consumables
Choose combs, wires and coils to match the hole pitch of your binding machine — it is given on its product page; glue to match the thermal binder. Pick film by lamination method, format and the thickness your model accepts; blades and cutting sticks by the cutter models named in the part titles.
We'll pick printing equipment for your task

Tell us what you make — documents, brochures, books, photos, business cards or calendars — plus the format and approximate print run. We'll suggest a machine and the consumables for it.

Related sections

FAQ about "Printing equipment and materials":

These are the machines and tools used to print and to finish printed products. Printing press manufacturers treat printing, post-print finishing and consumables as separate areas. Machines for printing — printers — are in the Equipment for printing section. Here you will find equipment for finishing printed work and the printing materials for it: film, photo paper, combs, wires and coils, covers, glue for thermal binders, foil.

It is everything done to a print after printing. In the classification used by printing press manufacturers, it covers cutting, folding, die-cutting and foil stamping, and for digital printing also perforating, hole punching and creasing. Our section has equipment for cutting, creasing and perforating, die-cutting and foil stamping, as well as for laminating, binding and bookbinding.

Laminating pouches need a laminator; for working by hand, there is self-adhesive film. Step-by-step lamination is in the Laminators section; materials for applying by hand are in the Cold lamination film section.

In hot stamping, a heated die under pressure transfers layers of foil from the carrier film to the item where the raised areas of the die touch the foil — that is how foil manufacturers describe the process. For this we have hot stamping foil. Toner-sensitive foil sticks only to the areas printed with laser printer toner as the sheet passes through the laminator's hot rollers — as its product page states; the shape of the imprint comes from the print itself.

Die-cutting is cutting out an item of a set shape, such as a card or a business card. According to its product page, the press for cutting PVC cards cuts a CR-80 card (the size of a bank card) with rounded corners in one go — from plastic, laminated paper or magnetic vinyl; the press for cutting business cards gives square corners. The sizes of both are in the table above.

The My Print XD-322 guillotine cuts sheets up to 2 mm thick — its product page names circuit boards, aluminum, iron, copper and plastic. Sheets in the Metal for sublimation section are 0.35 to 1 mm thick. Write to us with the type of metal and the sheet thickness — we will confirm. Other models are in the Metal cutters section.