Laminators

Laminators for paper, documents and photos: My Print pouch laminators in A4 and A3 format, including 5 in 1 and 6 in 1 models with a trimmer and a corner rounder.

Below: how to choose and buy an A4 or A3 laminator, which film each model takes, and how to laminate a document or a photo.

Sorting:
A4 · A3formats: 1 A4 model and 3 A3 models
40–250 µmfilm thickness, depending on the model
5 in 1 · 6 in 1laminator with a trimmer and a corner rounder
2 modeshot and cold lamination in the 5 in 1 and 6 in 1 models

Which laminator to choose

In short: for sheets up to A4 — SL688 5 in 1 A4; for A3 — SL888 5 in 1, My Print 6 in 1 or LM-330iD; for the widest choice of film thickness and professional work — LM-330iD; to trim the edges and round the corners right away — the 5 in 1 and 6 in 1 models.

A4 or A3 laminator

A4 laminator

Takes A4 (216 × 303 mm) and A5 (154 × 216 mm) pouches — for anything that fits on an A4 sheet.

A3 laminator

An A3 pouch (303 × 426 mm) is 303 mm wide, so it needs an A3 laminator with a working width of 303 mm or more. Such a laminator also takes A4 and A5 pouches.

Four laminators compared

Values from the product pages.

ModelFormat · entry widthFilm thicknessRollersJam releaseSpeedWarm-up
SL688 5 in 1 A4A4 · 230 mm80–125 µm2ABS, manual370–450 mm/min3–6 min
SL888 5 in 1 A3A3 · 330 mm80–125 µm2ABS, manual370–450 mm/min3–6 min
My Print 6 in 1 A3A3 · 330 mm80–100 µm2ABS, manual250 mm/min3–5 min
LM-330iD A3A3 · 330 mm40–250 µm4reverse, electric600 mm/min3–5 min

5 in 1, 6 in 1 and LM-330iD: what each model can do

5 in 1 — SL688 and SL888

Laminator, paper trimmer, corner rounder, hole punch and binding rings — that is how the product pages of these models spell out “5 in 1”. They laminate in hot and cold mode.

6 in 1 — My Print 6 in 1

Hot and cold lamination, three cut types — straight, wave and perforation for a tear-off edge — and corner rounding: six functions in all, in a single unit.

LM-330iD — pouch laminator

Temperature control 100–180 °C and a metal body; according to its product page, the roller system with external heating gives uniform coverage.

Who each laminator is for

Home and school

Photos, certificates, children’s artwork. According to its product page, the 6 in 1 model suits both schools and home use.

My Print 6 in 1 A3

Office

Office documents, certificates and menus are listed applications of the 6 in 1 model; offices are also among the applications of the LM-330iD.

My Print 6 in 1 A3 · LM-330iD A3

Copy center and print shop

The LM-330iD product page describes it as a laminator for professional use; its applications include copy centers and print shops.

LM-330iD A3

Documents, photos, badges

Document lamination, photo protection and badge making are the applications of the 5 in 1 models.

SL688 5 in 1 A4 · SL888 5 in 1 A3

How to choose a laminator: 3 steps

Format
Take the largest sheet you will laminate: its format is the laminator format you need — A4 or A3.
Film
Work out the pouch thickness you need from the description in the “Lamination film” section, then match it against the model’s range in the table.
Volume and tasks
For daily work, compare the speed and the number of rollers; for finishing cards, compare the tools of the 5 in 1 and 6 in 1 models.

How to laminate a document or a photo

Laminating paper, a photo or a card in a pouch laminator — following the tips from our articles.

Warm up the laminator
Wait for the ready indicator (each model’s warm-up time is in the table). With pouches of different thickness, start with the thinnest.
Pick a pouch
Choose a pouch that matches the sheet format, with a thickness within your laminator’s range. Let an inkjet photo dry first and laminate a spare copy.
Insert the sheet
Place the document or photo straight, close to the factory seal, with equal margins on both sides.
Key step
Feed it sealed edge first
The pouch goes into the slot sealed edge first, centered. Leave at least 50 cm of free table space behind the laminator.
Let it cool
Take the finished pouch from the exit right away and lay it flat to cool.

The steps come from our articles “Laminator jam: how to get the pouch out” and “Laminating Film Thickness: A Table from Menus to Badges”.

We’ll match a laminator to your tasks

Tell us what you laminate — documents, photos, badges or menus — your largest format and which pouches you already have. We’ll suggest a model and film.

Film, foil and finishing after lamination

FAQ about "Laminators":

A laminator is a device for laminating: a sheet printed on a printer, a photo or a card is placed in a pouch of two films sealed along one edge, and the laminator runs the pouch between rollers — heat seals the film around the sheet. A paper laminating machine is called just that — a laminator. Pouch laminators are also called envelope laminators.

Pull the pouch out gently, depending on what your model has: reverse — switch it on, and the rollers bring the pouch back out through the entry; manual ABS release — switch the laminator off, hold the ABS slider and pull the pouch straight out through the entry slot. Which of these your model has is in the table above. Step-by-step instructions with a feeding diagram are in the article “Laminator jam: how to get the pouch out”.

For heat-sensitive materials: that is how the product page of the My Print 6 in 1 describes its cold mode.

The pack usually states the thickness of one layer of the pouch — check that number against the laminator table above. Choose pouches in the format you need in the “Lamination film” section.

A roll laminator is the choice for large runs and long or wide formats: My Print roll laminators are from 30 to 160 cm wide, in the “Roll Laminators” section.

With self-adhesive cold lamination film: it sticks at room temperature. Peel off the backing, lay the film on a dry print and smooth it with a squeegee from the center to the edges. A4 and A3 sheets — glossy, matte, holographic and textured — are in the “Cold lamination film” section.