15.03.2025

Complete Printing Business Economics: Financial Model from 0 to $25K/month Revenue

Complete Printing Business Economics: Financial Model from 0 to $25K/month Revenue

Everyone who considers a printing business asks the same question: “How much do I need to invest, and how much can I really earn?”. The internet is full of promises like “earn a million in your first month”, but real figures are rare. In this study we break down the economics of a printing business step by step: from the cost of every gram of ink to a monthly P&L report.

Prices of equipment, blanks and consumables are taken from the MyPrint website in October 2026. Selling prices and order volumes are Ukrainian market benchmarks, so check them against your own city.

▶ Contents

  • Three entry levels: how much you need to start
  • The cost of each product, down to the last kopeck
  • Margins by product category
  • Operating expenses: what eats your profit
  • Break-even point: when the business starts to earn
  • Scaling financial model: from a garage to a production shop
  • FAQ: answers to financial questions

▶ Three entry levels: how much you need to start

A printing business is one of the few where you can start with different budgets and scale up gradually. We identify three clear investment levels, each matching a different level of ambition and resources.

▶ Level 1: “Minimal start” — from UAH 192,000

What’s included:My Print M330 DTF printer with an XP600 head and 30 cm roll feed (UAH 134,580), V330 shaker dryer (UAH 40,345), HP380A 38×38 cm heat press (UAH 12,850), a starter set of consumables — CMYK+W inks, film, powder (about UAH 4,000).

Who it’s for: testing a niche, a side income, a small workshop.
Capacity: up to 100 A4 prints a day (print speed up to 1.7 m²/h).
Limitations: one print head, 29 cm print width, no fume extractor in the set — you need a ventilated room.
▶ Level 2: “Serious start” — from UAH 281,000

What’s included:My Print PRO330 DTF printer with 2 XP600 heads and a 33 cm roll (UAH 198,000), shaker dryer V330 (UAH 40,345), HP460A 40×60 cm heat press (UAH 19,990), XS-080 fume extractor (UAH 18,450), a starter set of consumables. The wider PRO400, with a 40 cm roll, costs from UAH 219,000.

Who it’s for: a full-scale business from day one.
Capacity: 80-150 A4 prints a day.
Advantages: two print heads give up to 4.5 m²/h — 2.5 times faster than the first level; the extractor removes fumes from the shaker.
▶ Level 3: “Production” — from UAH 562,000

What’s included:My Print PRO600 NEW DTF printer kit with 2 I3200 heads and starter consumables (UAH 405,224), V600 shaker dryer for 60 cm (UAH 81,340), two 40×60 cm heat presses (UAH 39,980), F6002 fume extractor (UAH 26,815), Epson L132 sublimation printer to expand your range (UAH 8,817).

Who it’s for: serious production, B2B orders, a merch agency.
Capacity: 200-500+ prints a day.
Advantages: industrial speed, 60 cm print width, the lowest cost per unit.

▶ The cost of each product, down to the last kopeck

This is the most important section of this study. We calculated the real cost of the most popular products, including ALL expenses: ink, film, powder, electricity and equipment depreciation.

DTF print cost formula:

Cost = (Ink usage × price per ml) + (Film area × price per m²) + (Powder usage × price per kg) + Electricity + Depreciation

Example for an A4 print (21×29.7 cm) on the first level:
• CMYK inks: ~2 ml × UAH 1.98/ml ≈ UAH 4
• White ink: ~3 ml × UAH 1.98/ml ≈ UAH 6
• DTF film: 0.063 m² × UAH 80/m² ≈ UAH 5
• Powder: ~8 g × UAH 0.67/g ≈ UAH 5.4
• Electricity: ~UAH 2
• Depreciation (first-level equipment, 2 years at 100 prints a day): ~UAH 3
TOTAL: ≈ UAH 25 per A4 print

This is a full-colour design covering the whole sheet. A logo or lettering uses several times less ink and powder. Prices used: ink UAH 1,980 per 1 L, a 0.3×100 m film roll — UAH 2,389, powder UAH 674 per 1 kg.

And now — the full cost table by product category:

ProductCostMarket priceMarkup
DTF A4 print on the customer’s garmentUAH 20-30UAH 100-200230-900%
DTF A3 print on the customer’s hoodieUAH 40-50UAH 150-300200-650%
330 ml mug with sublimationUAH 52-59UAH 150-300150-480%
Colour-changing mug with sublimationUAH 79-80UAH 250-500210-530%
Sublimation puzzle (A5 or heart)UAH 29-37UAH 150-300300-930%
58 mm badgeUAH 6-8UAH 25-60210-900%
UV DTF sticker 10×10 cmUAH 5-10UAH 30-100200-1900%
Sublimation pillow 30×30 or 40×40 cmUAH 140-175UAH 250-50040-260%
DTF 10×10 cm logo on the customer’s workwearUAH 4-6UAH 30-80400-1900%
Important: for DTF the table shows the print only. If you print on the customer’s garment, that is your whole cost. If you sell a T-shirt or hoodie with a print, add the blank: T-shirts on the website cost from UAH 290, hoodies from UAH 679. For mugs, puzzles, badges and pillows the blank is already included at website prices. Markup is the difference between the selling price and the cost, divided by the cost.

▶ Margins by category: where the profit is highest

Not all products are equally profitable. Here is the ranking of categories by markup:

Top 5 products by markup:

1. UV DTF stickers — markup up to 1900%, a cost of pennies, growing demand
2. DTF on workwear (B2B) — markup up to 1900%, large runs, regular orders
3. Puzzles — markup up to 930%, a cheap blank, gift demand
4. Badges — markup up to 900%, minimal cost, bulk orders (schools, events)
5. DTF prints on customers’ garments — markup up to 900%, no spending on blanks

But markup is not profit yet. You need to consider turnover (how many units you sell) and the average order value. That is why printers who focus only on T-shirts often earn less than those who diversify their range.

▶ Operating expenses: what eats your profit

Many beginners count only the cost of the print and forget about operating expenses. Here is the full list of what you need to budget for:

Expense itemLevel 1Level 2Level 3
Rent0 (at home)5-10K10-25K
Electricity0.5-1K1.5-3K3-8K
Internet + phone300500800
Packaging + delivery0.5-1.5K2-5K5-15K
Marketing1-3K3-8K8-25K
Taxes (sole proprietor, group 2) + social contribution + military levy4,5004,5004.5-9K
Salaries00-15K30-80K
TOTAL / month6.8-10.3K16.5-46K61-163K

▶ Break-even point: when the business starts to earn

The break-even point is the moment when your income covers all expenses, including the return of the initial investment. Here are realistic scenarios:

● “Minimal start” scenario (investment UAH 192,000):
  • Average order value: UAH 300 (prints on customers’ garments and T-shirts with prints)
  • Cost + operating expenses per unit: ~UAH 190
  • Profit per unit: UAH 110
  • To cover the investment: 192,000 ÷ 110 = 1,746 sales
  • At 5-8 sales a day: payback in 7-12 months
● “Serious start” scenario (investment UAH 281,000):
  • Average order value: UAH 400 (product mix)
  • Cost + operating expenses per unit: ~UAH 230
  • Profit per unit: UAH 170
  • To cover the investment: 281,000 ÷ 170 = 1,653 sales
  • At 10-15 sales a day: payback in 4-6 months
● “Production” scenario (investment UAH 562,000):
  • Average order value: UAH 450 (B2B runs + retail)
  • Cost + operating expenses per unit: ~UAH 250
  • Profit per unit: UAH 200
  • To cover the investment: 562,000 ÷ 200 = 2,810 sales
  • At 25-40 sales a day: payback in 2-4 months
Interesting fact: the more expensive level pays back faster — from 7-12 months at the start to 2-4 months in production. Bigger investments give more capacity and a lower cost per unit, but only when there are orders for all that capacity. Without orders, expensive equipment just sits idle.

▶ Scaling financial model: the road to UAH 1M/month

Now the most interesting part — how to grow from a home printer to a million a month. Here is a realistic roadmap:

▶ Phase 1: Start (months 1-3)
  • Equipment:DTF kit (printer + shaker + heat press)
  • Products: T-shirts with DTF printing
  • Channels: Instagram, OLX, friends
  • Revenue: UAH 30,000-60,000/month
  • Net profit: UAH 10,000-20,000/month
▶ Phase 2: Diversification (months 4-8)
▶ Phase 3: B2B and scale (months 9-18)
  • Upgrade:60 cm DTF printer, automatic heat press, UV DTF printer
  • Focus: corporate orders (merch, workwear), run printing
  • Team: 1-2 employees
  • Revenue: UAH 200,000-500,000/month
  • Net profit: UAH 80,000-200,000/month
▶ Phase 4: Production (months 18+)
  • Full line: Several DTF printers, industrial presses, cutting plotter, badge machine
  • Focus: White-label production, wholesale, franchising
  • Team: 3-8 employees
  • Revenue: UAH 500,000-1,000,000+/month
  • Net profit: UAH 150,000-400,000/month

▶ Monthly P&L: what a “healthy” print shop looks like

Here is an example of a monthly report for a printing business in Phase 2 (stable operation, 8-12 orders a day): a third of the orders are T-shirts with prints, a third are mugs, puzzles and pillows, and a third are prints on customers’ garments and badges.

P&L itemAmount (UAH/month)
Revenue (300 orders x UAH 350)105,000
Consumables-6,000
Blanks (T-shirts, mugs, puzzles)-37,600
Rent-7,000
Electricity-2,000
Marketing-5,000
Packaging + delivery-3,000
Taxes + social contribution + military levy-4,500
Net profitUAH 39,900
Profitability38%

▶ Hidden costs nobody talks about

There are costs that beginners usually don’t budget for and are then surprised by:

⚠️ Hidden costs:
  • Defects and test prints: 5-10% of consumables — for calibration, tests and failed prints
  • Equipment downtime: head cleaning, filter replacement — 2-4 hours a week without printing
  • Seasonality: summer (June-August) — a drop to 40-60% of the peak
  • Returns and complaints: 2-5% of orders — build it into the price
  • Training: the first 2 weeks — minimal productivity, lots of defects
  • Equipment upgrades: print heads wear out (a lifespan of 12-24 months with intensive use)

▶ FAQ: financial questions

Can I start without registering as a sole proprietor?

Technically yes — for the first sales. But to work with marketplaces, accept cashless payments and serve B2B clients, sole proprietor (FOP) registration is required. We recommend registering as a group 2 sole proprietor right away. In 2026 this means up to UAH 1,729.40 single tax, UAH 1,902.34 social contribution and UAH 864.70 military levy per month.

How many orders do you need to reach UAH 100,000/month?

With an average order value of UAH 350 you need ~286 orders a month, or ~10 a day. Such a turnover leaves about UAH 38,000 net, as in the P&L example above. This is quite achievable for one operator with the right equipment.

Which technology is the most profitable to start with?

DTF printing is the most versatile. It works with any fabric and does not need special blanks. The cheapest entry is sublimation: a kit with a 38×38 cm heat press and an Epson L132 printer costs about UAH 22,000, but it prints only on light polyester and sublimation blanks. If you also plan mugs and souvenirs, add a sublimation printer.

Is it worth taking a loan for equipment?

Payback in this model ranges from 2-4 months in production to 7-12 months at the start, so a loan is justified only when you are confident in your sales channels. But it is better to start with a minimal kit using your own money, confirm demand, and then scale up.

What are the regular costs of consumables?

About UAH 20 per A4 print: ink and powder ~UAH 15, film ~UAH 5. With 300 orders a month that is ~UAH 6,000. If you load Level 2 fully (80-150 prints a day), it comes to UAH 48,000-90,000 a month, but revenue is then many times higher too.

Where can you find your first clients without a marketing budget?

Instagram (free content, Reels), OLX (free listings), Telegram channels in your city, friends and word of mouth, local businesses (cafés, gyms, schools). Most printers get their first 50 clients without spending on advertising.

Does it make sense to combine DTF and sublimation?

Absolutely. DTF covers textiles (any fabric), sublimation covers mugs, puzzles, pillows and metal panels. Together you cover 90% of the personalised products market. Sublimation kits can be added later as the next step.

How much space do you need at minimum?

For Level 1: a room from 8 m² with ventilation (table, printer, shaker dryer, heat press). For Level 2: 15-25 m² (a separate room with ventilation). For Level 3: 40-80 m² (a production workshop).

DTF printers ▶

DTF printing kits ▶

Heat presses ▶