+38 (093) 182-03-34+38 (067) 830-54-54
0
Результатов:
    Sign in
    RU
    UA
    0

    Roll Laminators

    Choose the film process first, then allow width margin and select the feed type. The range covers compact UV DTF and desktop models, manual wide-format machines, electric LC Pro units, and an industrial roll-to-roll system.

    Categories
    Sorting:

    How to choose a roll laminator

     
    15models
    30–160 cmwidth range
    3process classes
    manual and electricfeed; pneumatic pressure in the industrial class

    Three processes, six product lines

     

    Compare the six product lines on three axes: film process, working width, and feed method.

    VariantProcessWorking widthFeed
    LH Base / LH ProUV DTF and hot stamping30–60 cmelectric
    L Basehot / cold35–38 cmelectric
    LC Basecold desktop39–100 cmmanual
    LC Standcold with floor stand130–160 cmmanual
    LC Prorepeat cold workflow65–160 cmelectric
    L Industrialhot / cold roll-to-roll160 cmelectric; pneumatic pressure

    Check the job

     
    The film process is known: cold, hot/cold, or UV DTF
    Media fits the working width with edge clearance
    Long media has straight support at entry and exit
    You need office pouch lamination, which is another equipment class

    From material to production

     
     
    Identify the process
    Separate cold film, hot/cold work, and UV DTF A/B
     
    Add width margin
    Keep media away from the roller edges
     
    Choose feed
    Manual for controlled passes, electric for repeat production
     
    Key step
    Prepare the path
    Center rolls, support, and take-up
     
    Inspect a short test
    Check edges, bubbles, wrinkles, and winding
    Tip: Test the material on the same path intended for production.

    Keep hands away from rollers; stop and disconnect power before cleaning.

    Production scenarios

     
    UV DTF finishing
    LH Base handles A/B films; LH Pro adds waste removal
    Desktop work
    L Base combines hot and cold modes
    Short cold runs
    LC Base keeps pace under operator control
    Wide manual media
    LC Stand adds floor support and a roll shaft
    Repeat wide-format work
    LC Pro uses electric feed
    Industrial roll-to-roll
    L Industrial adds pneumatic pressure and take-up

    What prevents a straight pass

     
    Diagonal wrinkle

    Cause: web or roll is off axis

    Fix: stop the feed and recenter the path
    Bubbles

    Cause: pressure is uneven or a roller is dirty

    Fix: clean the work surface and repeat the test
    Edge sags

    Cause: media lacks entry or exit support

    Fix: level both sides of the path
    Take-up shifts

    Cause: feed and take-up axes differ

    Fix: reload the rolls on one line

    Related categories and materials

     

    After choosing the machine, match the film, UV DTF equipment, and media-preparation tools.

    categoryLaminating films and materialsmatch material to the processcategoryCold laminating filmbrowse pressure-sensitive filmscategoryUV DTF printersmatch printing and finishingcategoryFoil for UV DTF printingselect material for foil effectscategoryPaper cuttersprepare edges and format

    FAQ about "Roll laminators":

    Cold LC uses pressure-sensitive film; L Base adds hot mode; LH handles UV DTF A/B and hot stamping.

    For long wide media that needs support before and after the rollers.

    For repeat passes and long runs at a stable pace.

    Controlled wide pressure in the industrial roll-to-roll class.

    Choose a class wider than the media to leave centering clearance.

    Clean the rollers, align the path, and inspect a short test.

    ...