Novelty

My Print LC Pro 1600 Electric Cold Roll Laminator, 160 cm (13237)

In stock

The date of shipment of the goods: tomorrow (30.07.2026)
Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

Return guarantee
We guarantee a refund if you are not satisfied with the product
Доставка
Delivery across Ukraine to any settlement
4.9
GoogleCustomer reviews

Description My Print LC Pro 1600 Electric Cold Roll Laminator, 160 cm (13237)

What this laminator is

This electric cold laminator with a floor stand handles long jobs up to 160 cm wide at a repeatable pace. A 160 cm electric stand for repeat wide-format work.

160 cmworking width

coldprocess

electricfeed

floor-standing with standconfiguration

Is this model a fit

You have regular long cold passes that need a consistent pace

There is room for the stand and a straight media entry and exit

Work is occasional and short, so manual LC Stand 1600 may be simpler

Verified specifications

hand wheelprecise media loading

foot pedalhands stay on media control

Parameter	Value
Working width	160 cm (1600 mm)
Process	cold
Feed	electric
Configuration	floor-standing with stand

How material travels

1Floor standsupports wide media and the roll

2Pressure rollerjoins materials through a cold process

3Electric drive and foot pedalmove the job without constant hand cranking

4Hand wheelhelps load and unload the material precisely

Why choose this model

Electric pace

A long pass does not depend on turning a hand crank

Foot pedal

The operator's hands remain free to control the media

Hand wheel

Precise loading is available before the motorized pass

Cold workflow

Pressure-sensitive film passes without heating operations

Operating workflow

Secure the rolls

Center the film and substrate on the stand

Load the material manually

Use the hand wheel for precise entry

Set the pressure

Equalize contact across the full width

Key step

Start with the foot pedal

Check direction and the edge on a short section

Run the regular pass

Stop electric feed at the first sign of drift

Tip: Align the leading edge with the hand wheel before starting with the foot pedal.

Stop electric feed completely before correcting the edge.

Compare within the product line

Variant	Process	Working width	Feed
My Print LC Pro 650 electric cold roll laminator, 65 cm	cold	65 cm	electric
My Print LC Pro 1300 electric cold roll laminator, 130 cm	cold	130 cm	electric
My Print LC Pro 1600 electric cold roll laminator, 160 cmYou are here	cold	160 cm	electric

Where this model fits

Production posters

Repeat cold passes for long jobs

Self-adhesive graphics

Electric feed for a consistent pace

Wide-format finishing

Media on a stand controlled by the foot pedal

Risks and fixes

Media shifts under motor drive

Cause: rolls are off axis

Fix: stop the drive and reload manually

Foot pedal starts a crooked edge

Cause: the test was too short

Fix: align the leading edge with the hand wheel

Tension rises toward the end of the roll

Cause: unwind resistance is uneven

Fix: reduce resistance and repeat a short pass

Questions before ordering

What does LC Pro add?

Electric drive, a foot pedal, and a hand wheel for precise loading.

Is it suitable for short tests?

Yes, but manual LC Stand 1600 is simpler for occasional work.

Why does an electric machine have a hand wheel?

For precise loading and controlled material exit.

When should the drive stop?

Immediately at drift, a wrinkle, or uneven tension.

Related materials and equipment

categoryCold laminating filmbrowse pressure-sensitive films categoryLaminating films and materialsmatch material to the process