Cutting board for sublimation glass rectangular textured 20*28 cm (13474)

To apply an image to a blank, you will need:

• Heat press for T-shirts or multi-functional heat press;
• Sublimation printer filled with sublimation inks;
• Sublimation paper;
• Heat-resistant tape;
• Доска разделочная для сублимации стеклянная прямоугольная текстурная 20*28 см

The process of printing on a blank using sublimation consists of several stages:

1. Print the prepared image on sublimation paper. Keep in mind that the image should be printed in mirror reflection. You can flip the image in a graphics editor, but it is more convenient to mark it in the corresponding field in the print settings.
2. Let the sublimation paper dry. If printing was done on matte photo paper, this step can be skipped, as the ink is almost instantly absorbed into the paper.
3. Cut out the image and fix it on the blank using heat-resistant tape.
4. Place our blank in a heat press and press the start button for the countdown timer.
5. After the set time is up, a sound signal will sound. Remove the product, remove the paper and let it cool.

The process is complete. Доска разделочная для сублимации стеклянная прямоугольная текстурная 20*28 см is now not just a blank, but a finished product with a unique image or photo.

Sublimation paper test My Print and IST: