Sublimation Cup White with Spoon Tapered Bottom 11 Oz (330 ml) (6078) - фото 1 - Blanks for sublimation
Sublimation Cup White with Spoon Tapered Bottom 11 Oz (330 ml) (6078) - фото 2 - Blanks for sublimation
  • Sublimation Cup White with Spoon Tapered Bottom 11 Oz (330 ml) (6078) - фото 1 - Blanks for sublimation
  • Sublimation Cup White with Spoon Tapered Bottom 11 Oz (330 ml) (6078) - фото 2 - Blanks for sublimation
  • Sublimation Cup White with Spoon Tapered Bottom 11 Oz (330 ml) (6078) - фото 1 - Blanks for sublimation
  • Sublimation Cup White with Spoon Tapered Bottom 11 Oz (330 ml) (6078) - фото 2 - Blanks for sublimation

Sublimation Cup White with Spoon Tapered Bottom 11 Oz (330 ml) (6078)

(0)
Not available
Price:
87.00 грн
  • Buy a box36 штук - 3132 грн
  • Report availability
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Sublimation Cup White with Spoon Tapered Bottom 11 Oz (330 ml) (6078)

A white tapered mug with a spoon in the handle for photos and lettering

 

A 330 ml (11 oz) ceramic mug with a white wall for sublimation and a ceramic spoon held in the handle. The wall tapers gently towards the base: the print goes on the upper part, where the heater makes close contact; a straight heater does not make close contact with the tapered lower section. Ø 8.3 cm at the rim is within the range of a standard 11 oz heater (7.5–9 cm); before pressing, take the spoon out so it does not get in the way of the clamp, and check that the heater makes close contact with the upper part and covers the full design height. MyPrint's starting settings are 180–200 °C for 180 seconds.

Spoonceramic, in the handle
330 ml11 oz volume
180–200 °Cstarting settings, 180 s
36 pcsper carton, also sold singly

Is this mug right for you

 
Your heater matches the body diameter, makes close contact with the smooth print area and covers the full design height, with clearance for the handle
You print with sublimation ink on sublimation paper
You need a gift mug of an unusual shape that comes with a spoon
You need a cylindrical mug with a spoon — there is the white mug with a spoon, 330 ml
You need the design down to the very base — the heater does not make close contact with the tapered lower section, and the lower part will come out pale

Size and print settings

 
Ø 8.3 cmdiameter at the rim
Taperedlower section
Whitewall for printing
Glossysurface
Temperature
180–200 °Cstarting point for a white ceramic mug
Time
180 scount from closing the preheated press
Pressure
firmthe press handle closes with effort

These are starting settings: the exact ones are tuned to your press, paper, ink and room conditions — temperature and humidity.

Why this mug

 

An unusual shape

The tapered lower section sets the mug apart from standard cylinders

A white wall for the design

A background for photos, lettering and logos on the upper part of the wall; size the design to the heater's working area and leave clearance around the handle

From file to finished mug

 
 
Prepare the layout
Measure the height of the upper part of the wall, where it is almost straight, and the circumference without the handle zone; keep the design off the tapered lower section.
 
Take out the spoon
Before pressing, remove the spoon from the handle so it does not get in the way of the clamp.
 
Print mirrored
With sublimation ink on the white side of sublimation paper.
 
Let it dry
The paper dries quickly; a damp print blurs the outline.
 
Fix the paper
Wrap the mug tightly with no gaps and secure the edges with heat-resistant tape.
 
Key step
Press
Starting settings — 180–200 °C, 180 seconds, firm pressure.
 
Remove the paper
Right after the signal, wearing heat-resistant gloves, without sliding the sheet over the hot surface.
 
Let it cool
Let the mug cool completely before packing it.
Tip: Make the first mug of a batch a test piece: tune the starting settings to your press, paper, ink and room conditions, changing one setting at a time.

A white mug in a special format: which to choose

 
VariantShapeVolumeBest for
White with a spoon, tapering to the base, 330 mlYou are hereTapering to the base, spoon in the handle330 mlA gift that comes with a spoon
White with a spoon, 330 mlCylindrical, spoon in the handle330 mlA gift that comes with a spoon
White, narrowing to the base, 280 mlNarrowing to the base280 mlAn unusual shape for everyday coffee
White Premium+ 11 ozCylindrical330 mlClassic: photos and logos
White 450 mlCylindrical450 mlA bigger serving of tea or coffee

Where it works best

 
Holiday gifts
A photo or lettering on a mug that already comes with a spoon
Corporate gifts
A logo on a mug with a spoon for clients and the team
Cafés
Branded mugs of an unusual shape with a logo for guests

What can go wrong

 
The spoon keeps the press from closing

Cause: the spoon was left in the handle

Fix: take it out before pressing and put it back once the mug has cooled
Pale band near the base

Cause: the heater does not make close contact with the tapered lower section

Fix: keep the design on the upper part of the wall
Ghosted outline

Cause: the paper shifted on the hot mug

Fix: tape the edges and remove the sheet in one motion without dragging it over the surface
The white area turns yellow

Cause: overheating: too many degrees or seconds

Fix: on a fresh test mug, adjust the starting settings by reducing either time or temperature, changing one setting at a time
The print faded within a few months

Cause: dishwasher and abrasive sponges

Fix: wash by hand with a soft sponge — the print keeps its brightness longer

Questions and answers

 

Is the mug pressed with the spoon in?

No: before pressing, the spoon is taken out of the handle and put back once the mug has cooled. The print goes on the upper part of the white wall: a standard heater does not make close contact with the tapered lower section.

Which press will do?

A mug heat press whose heater wraps the Ø 8.3 cm body tightly and covers the full design height, for example with a standard 11 oz heater for 7.5–9 cm in the AP1803 press; check this before the first print.

What temperature does mug sublimation need?

The starting settings are 180–200 °C and 180 seconds with firm pressure. The exact values depend on your press, paper, ink and room conditions, so make the first mug of a batch a test piece.

How many pieces are in a carton?

36. It is also sold singly, for a single order.

How should this mug be washed?

By hand, with a soft sponge and a mild detergent. The print keeps its brightness longer — pass this tip on to your customer with the mug.

What you need for printing

 

Everything it takes to turn this mug into a finished gift: a press, paper, ink and packaging.

Характеристики Sublimation Cup White with Spoon Tapered Bottom 11 Oz (330 ml) (6078)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product