Acrylic photo frame for sublimation with LED backlight and wooden stand rectangular (12032)

To apply an image to an acrylic blank, you will need:

• Heat press for T-shirts or multifunctional heat press;
• Sublimation printer filled with sublimation ink;
• Sublimation paper;
• Thermal tape;
• Acrylic photo frame for sublimation with LED backlight and wooden stand rectangular

The process of printing by the sublimation methodAcrylic photo frame for sublimation with LED backlight and wooden stand rectangular consists of the following stages:

1. Print the prepared image on sublimation paper in direct (not mirror) image;
2. Let the sublimation paper dry. If the printing was done on matte photo paper, then this step can be skipped, since the ink is absorbed into the paper almost instantly;
3. Remove the protective film from the white side of the acrylic;
4. Cut out the image and attach it to the white side of the acrylic and fix it with thermal tape;
5. Place the blank in the heat press;
6. Set the temperature to 180 ° C and time for 100 seconds;
7. Apply light pressure (less than average).

Cooling:

1. After the transfer process is complete, carefully remove the paper;
2. It is recommended to place the workpiece under a cold press or other flat weight to avoid deformation during cooling;
3. After complete cooling, remove the protective film from the other side of the acrylic.

The process is complete. Acrylic photo frame for sublimation with LED backlight and wooden stand rectangular is now not just a workpiece, but a finished product with a unique image or photograph.