Thermos for sublimation metallic sports silver (450 ml) (2998) - фото 1 - Blanks for sublimation
Thermos for sublimation metallic sports silver (450 ml) (2998) - фото 2 - Blanks for sublimation
Thermos for sublimation metallic sports silver (450 ml) (2998) - фото 3 - Blanks for sublimation
Thermos for sublimation metallic sports silver (450 ml) (2998) - фото 4 - Blanks for sublimation
Thermos for sublimation metallic sports silver (450 ml) (2998) - фото 5 - Blanks for sublimation
  • Thermos for sublimation metallic sports silver (450 ml) (2998) - фото 1 - Blanks for sublimation
  • Thermos for sublimation metallic sports silver (450 ml) (2998) - фото 2 - Blanks for sublimation
  • Thermos for sublimation metallic sports silver (450 ml) (2998) - фото 3 - Blanks for sublimation
  • Thermos for sublimation metallic sports silver (450 ml) (2998) - фото 4 - Blanks for sublimation
  • Thermos for sublimation metallic sports silver (450 ml) (2998) - фото 5 - Blanks for sublimation
  • Thermos for sublimation metallic sports silver (450 ml) (2998) - фото 1 - Blanks for sublimation
  • Thermos for sublimation metallic sports silver (450 ml) (2998) - фото 2 - Blanks for sublimation
  • Thermos for sublimation metallic sports silver (450 ml) (2998) - фото 3 - Blanks for sublimation
  • Thermos for sublimation metallic sports silver (450 ml) (2998) - фото 4 - Blanks for sublimation
  • Thermos for sublimation metallic sports silver (450 ml) (2998) - фото 5 - Blanks for sublimation

Thermos for sublimation metallic sports silver (450 ml) (2998)

(0)
Color:
In stock
Price:
270.00 грн
Product in cart
  • The date of shipment of the goods: 2026-11-23
  • Buy a box50 штук - 13500 грн
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Thermos for sublimation metallic sports silver (450 ml) (2998)

A silver bottle with a cord loop for a logo on metal

 

A 450 ml steel bottle with a cord loop on the cap: a silver steel body. The body is straight, Ø 6.6 cm, and narrows towards the neck at the top; the straight part is printed. The double steel wall keeps drinks at temperature, and the sublimation coating is only on the outer wall. Sublimation ink is transparent, so the silver metal stays in place of any white in the design — the choice for logos and lettering. The Ø 6.6 cm body is printed in a 6–7 or 6.5–7.5 cm tumbler heater. As a start, use MyPrint's settings for steel tumblers — 180 °C, 80 seconds, medium pressure — and confirm them on a test bottle.

450 mlvolume
Silvermetal for a logo
180 °Cstart, 80 s
Cordloop on the cap

Is this bottle right for you

 
Your tumbler heater fits the Ø 6.6 cm body, makes close contact and covers the full design height
You print with sublimation ink on sublimation paper
You need a logo or lettering that sits on metal
Compare these alternatives: the white bottle with a cord loop and the white 500 ml thermos with a cord
You only print in a standard 11 oz heater for 7.5–9 cm — it will not wrap the Ø 6.6 cm body closely

Size and print settings

 
Ø 6.6 cmstraight body
≈ 20.7 cmapproximate body circumference
Double wallsteel
Temperature
180 °Cstart for a steel piece in a press
Time
80 sfrom closing the preheated press
Pressure
mediumthe handle closes easily and the piece does not turn

These are MyPrint's starting settings for steel tumblers in a heater that wraps the body all round; for this piece, confirm them on a test item. Tune the exact values to your press, paper, ink and room conditions — temperature and humidity.

Why this bottle

 

A cord on the cap

Easy to carry by hand or clip to a backpack

Metal under the logo

Unprinted areas stay silver

From file to finished bottle

 
 
Prepare the layout
Measure the height of the straight body, its circumference and diameter; add a paper overlap at the seam.
 
Print mirrored
With sublimation ink on sublimation paper.
 
Remove the cap with its cord
Only the steel body goes into the heater.
 
Fix the paper
Tightly all round on the straight part, with an overlap at the seam, and secure it with heat-resistant tape along the edges and the seam.
 
Key step
Press
Starting settings — 180 °C, 80 seconds, medium pressure in a heater for your diameter.
 
Remove the paper
Right after the signal, wearing heat-resistant gloves.
 
Put the cap with its cord back
Once the body has cooled completely.
Tip: Make the first piece from each new box a test piece. If the design blurs, give the next one 15 s less; if it is pale everywhere, check the press warm-up and paper contact, then add 10–15 s. Change one setting at a time.

Bottle or thermos: which to choose

 
VariantTypeVolume and colourDesign and use
Bottle with a cord loop, silver, 450 mlYou are hereBottle with a cordsilver, 450 mlA logo on metal
Bottle with a cord loop, white, 450 mlBottle with a cordwhite, 450 mlPhotos and full-colour layouts
Thermos with a cord, 500 mlThermos, cord on the capwhite, 500 mlPhotos and full-colour layouts
Thermos with a cup, 500 mlThermos, cup on topwhite, 500 mlPhotos and full-colour layouts

Where it works best

 
Sport and hikes
A bottle with a club emblem or a name
Corporate merch
A logo on an everyday bottle
A gift for a pupil
A name or a drawing on a water bottle

What can go wrong

 
A pale band on one side or a pale edge

Cause: the paper or heater does not make contact, or heating is uneven

Fix: check paper and heater contact and the press warm-up; a gap cannot be fixed with more time
A pale band at the edge of the print zone

Cause: the design ran past the straight part

Fix: keep the design within the straight part of the body
The design blurred

Cause: overheating

Fix: give the next piece 15 s less
Pale all over

Cause: underheating or weak paper contact

Fix: check the press warm-up and paper contact, then add 10–15 s on the next one
A line at the seam

Cause: the paper parted at the seam

Fix: leave an overlap and tape the seam along its length

Questions and answers

 

What are the print settings for this piece?

As a start, use MyPrint's settings for steel tumblers — 180 °C, 80 seconds, medium pressure, in a heater that wraps the body all round. If the design blurs, give the next one 15 s less; if it is pale everywhere, check the warm-up and paper contact, then add 10–15 s. The exact values depend on the press, paper, ink and room conditions, so make the first piece from a new box a test piece.

Will an ordinary mug press do?

A standard 11 oz heater is made for a 7.5–9 cm diameter, so it will not wrap the Ø 6.6 cm body closely. You need a tumbler heater: the 22 × 19.5 cm one for 6–7 cm or the 22 × 21.5 cm one for 6.5–7.5 cm, or the MP160 tumbler press, which comes with a 6.5–7.5 cm heater. Ask the manager whether a heater fits your press before buying it, and before the first print check that it makes close contact with the body and covers the full design height.

What do I do with the cap when printing?

Remove the cap with its cord: only the steel body goes into the heater. Put it back once the body has cooled completely.

Can I print in a sublimation oven?

Yes, after checking the dimensions: remove the lid, wrap only the steel body in paper and fit shrink film sized to the body. Check that the body with its paper and film fits inside the HO-16 oven, then preheat the oven. MyPrint's starting point for steel tumblers is 180 °C for 4–5 minutes; confirm it on a test piece. Tune the exact values to the oven, paper, ink, film and room conditions, including temperature and humidity; change one setting at a time. Remove the film and paper immediately after transfer, wearing heat-resistant gloves.

White or silver — which to choose?

For a logo on metal, silver: white areas of the design stay metal. For photos and full-colour layouts, white.

How should a printed piece be washed?

By hand, with a soft sponge, without abrasives. Never in a microwave: it is metal.

What you need for printing

 

Equipment and materials for your chosen sublimation printing method.

Характеристики Thermos for sublimation metallic sports silver (450 ml) (2998)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product