Thermos for sublimation, metal (steel 304) with a lid-handle, white (960 ml) (10539) - фото 1 - Blanks for sublimation
Thermos for sublimation, metal (steel 304) with a lid-handle, white (960 ml) (10539) - фото 2 - Blanks for sublimation
Thermos for sublimation, metal (steel 304) with a lid-handle, white (960 ml) (10539) - фото 3 - Blanks for sublimation
Thermos for sublimation, metal (steel 304) with a lid-handle, white (960 ml) (10539) - фото 4 - Blanks for sublimation
Thermos for sublimation, metal (steel 304) with a lid-handle, white (960 ml) (10539) - фото 5 - Blanks for sublimation
  • Thermos for sublimation, metal (steel 304) with a lid-handle, white (960 ml) (10539) - фото 1 - Blanks for sublimation
  • Thermos for sublimation, metal (steel 304) with a lid-handle, white (960 ml) (10539) - фото 2 - Blanks for sublimation
  • Thermos for sublimation, metal (steel 304) with a lid-handle, white (960 ml) (10539) - фото 3 - Blanks for sublimation
  • Thermos for sublimation, metal (steel 304) with a lid-handle, white (960 ml) (10539) - фото 4 - Blanks for sublimation
  • Thermos for sublimation, metal (steel 304) with a lid-handle, white (960 ml) (10539) - фото 5 - Blanks for sublimation
  • Thermos for sublimation, metal (steel 304) with a lid-handle, white (960 ml) (10539) - фото 1 - Blanks for sublimation
  • Thermos for sublimation, metal (steel 304) with a lid-handle, white (960 ml) (10539) - фото 2 - Blanks for sublimation
  • Thermos for sublimation, metal (steel 304) with a lid-handle, white (960 ml) (10539) - фото 3 - Blanks for sublimation
  • Thermos for sublimation, metal (steel 304) with a lid-handle, white (960 ml) (10539) - фото 4 - Blanks for sublimation
  • Thermos for sublimation, metal (steel 304) with a lid-handle, white (960 ml) (10539) - фото 5 - Blanks for sublimation

Thermos for sublimation, metal (steel 304) with a lid-handle, white (960 ml) (10539)

(0)
Color: White
Volume:
In stock
Price:
385.00 грн
Product in cart
  • The date of shipment of the goods: 2026-11-23
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Thermos for sublimation, metal (steel 304) with a lid-handle, white (960 ml) (10539)

A white tumbler with a handle lid for photos and full-colour print

 

A 960 ml bottle-shaped steel tumbler: a white coating for print, a black lid with a flip-up spout and a carry loop. The body is straight, with rounded shoulders; the straight Ø 9 cm part is printed. The double steel wall keeps drinks at temperature, and the sublimation coating is only on the outer wall. The white surface provides a background for photos, full-colour designs and text, and unprinted areas stay white. The Ø 9 cm body is printed in a 7.5–9 cm heater — a standard 11 oz one, or a 30 oz one in the MP170 press. MyPrint's starting settings for tumblers are 180 °C, 80 seconds, medium pressure.

960 mlvolume
Whitecoating for full-colour print
180 °Cstart, 80 s
Handle lidwith a flip-up spout

Is this tumbler right for you

 
Your 7.5–9 cm heater fits the Ø 9 cm body, makes close contact and covers the full design height
You print with sublimation ink on sublimation paper
You print photos, full-colour layouts or logos on a white background
Compare these alternatives: the silver 960 ml tumbler with a handle lid and the white 540 ml tumbler with a handle lid
The design has to run onto the rounded shoulders — the heater makes no contact there

Size and print settings

 
Ø 9 cmstraight body
≈ 28.3 cmapproximate body circumference
Shoulders and neckoutside the print area
Temperature
180 °Cstarting point for a tumbler in a press
Time
80 sfrom closing the preheated press
Pressure
mediumthe handle closes easily and the tumbler does not turn

These are starting settings for a heater that wraps the body all round. Tune the exact values to your press, paper, ink and room conditions — temperature and humidity — on a test tumbler.

Why this tumbler

 

A handle lid with a spout

Drink from the flip-up spout and carry it by the loop

A white background for photos

Photos, full-colour designs and text sit on a white background; check the colours on a test piece

From file to finished tumbler

 
 
Prepare the layout
Measure the height of the straight body up to the shoulders and its circumference; add a paper overlap at the seam.
 
Print mirrored
With sublimation ink on sublimation paper.
 
Remove the lid
Only the steel body goes into the heater.
 
Fix the paper
Tightly all round on the straight part, with an overlap at the seam, and secure it with heat-resistant tape along the edges and the seam.
 
Key step
Press
Starting settings — 180 °C, 80 seconds, medium pressure in a 7.5–9 cm heater.
 
Remove the paper
Right after the signal, wearing heat-resistant gloves.
 
Put the lid back
Once the body has cooled completely, put the lid back in place.
Tip: Make the first piece from each new box a test piece. If the design blurs or the white turns brown, give the next one 15 s less; if it is pale everywhere, check the press warm-up and paper contact, then add 10–15 s. Change one setting at a time.

Bottle with a handle: which to choose

 
VariantColourVolume and lidDesign and use
White with a handle lid, 960 mlYou are hereWhite background960 ml, handle lid with a spoutPhotos and full-colour layouts
Silver with a handle lid, 960 mlSilver metal960 ml, handle lid with a spoutA logo on metal
White with a handle lid, 540 mlWhite background540 ml, handle lid with a spoutPhotos and full-colour layouts
White with a steel cap, 600 mlWhite background600 ml, steel cap with a ringPhotos and full-colour layouts

Where it works best

 
Photo gifts
A photo or a collage on a bottle used every day
Corporate merch
A logo and branded layout on a white background
Sports clubs and hikes
Bottles with an emblem and names

What can go wrong

 
A pale band on one side or a pale edge

Cause: the paper or heater does not make contact, or heating is uneven

Fix: check paper and heater contact and the press warm-up; a gap cannot be fixed with more time
A pale band near the shoulders

Cause: the design ran past the straight part, where the heater makes no contact

Fix: keep the design within the straight part of the body
The design blurred or the white turned brown

Cause: overheating

Fix: give the next piece 15 s less
Pale all over

Cause: underheating or weak paper contact

Fix: check the press warm-up and paper contact, then add 10–15 s on the next one
A line at the seam

Cause: the paper parted at the seam

Fix: leave an overlap and tape the seam along its length

Questions and answers

 

What are the print settings for this tumbler?

MyPrint's starting settings for tumblers are 180 °C, 80 seconds, medium pressure, in a heater that wraps the body all round. If the design blurs, give the next one 15 s less; if it is pale everywhere, check the warm-up and paper contact, then add 10–15 s. The exact values depend on the press, paper, ink and room conditions, so make the first tumbler from a new box a test piece.

Which heater does it need?

One for a 7.5–9 cm diameter: the standard 11 oz heater in a mug press such as the AP1803, or the 30 oz heater in the MP170 press. Ask the manager whether a heater fits your press before buying it, and before the first print check that it makes close contact with the body and covers the full design height.

What do I do with the lid when printing?

Remove the handle lid: only the steel body goes into the heater. Put it back once the body has cooled completely.

Can I print in a sublimation oven?

Yes, after checking the dimensions: remove the lid, wrap only the steel body in paper and fit shrink film sized to the body. Check that the body with its paper and film fits inside the HO-16 oven, then preheat the oven. MyPrint's starting point for steel tumblers is 180 °C for 4–5 minutes; confirm it on a test piece. Tune the exact values to the oven, paper, ink, film and room conditions, including temperature and humidity; change one setting at a time. Remove the film and paper immediately after transfer, wearing heat-resistant gloves.

White or silver — which to choose?

For photos and full-colour layouts, white: colours sit on a white background. For a logo on metal, silver: white areas of the design stay metal.

How should a printed piece be washed?

By hand, with a soft sponge, without abrasives. Never in a microwave: it is metal.

What you need for printing

 

Equipment and materials for your chosen sublimation printing method.

Характеристики Thermos for sublimation, metal (steel 304) with a lid-handle, white (960 ml) (10539)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product