Thermal mug for sublimation with transparent lid and blue handle blue 900 ml (10576) - фото 1 - Blanks for sublimation
Thermal mug for sublimation with transparent lid and blue handle blue 900 ml (10576) - фото 2 - Blanks for sublimation
Thermal mug for sublimation with transparent lid and blue handle blue 900 ml (10576) - фото 3 - Blanks for sublimation
Thermal mug for sublimation with transparent lid and blue handle blue 900 ml (10576) - фото 4 - Blanks for sublimation
Thermal mug for sublimation with transparent lid and blue handle blue 900 ml (10576) - фото 5 - Blanks for sublimation
  • Thermal mug for sublimation with transparent lid and blue handle blue 900 ml (10576) - фото 1 - Blanks for sublimation
  • Thermal mug for sublimation with transparent lid and blue handle blue 900 ml (10576) - фото 2 - Blanks for sublimation
  • Thermal mug for sublimation with transparent lid and blue handle blue 900 ml (10576) - фото 3 - Blanks for sublimation
  • Thermal mug for sublimation with transparent lid and blue handle blue 900 ml (10576) - фото 4 - Blanks for sublimation
  • Thermal mug for sublimation with transparent lid and blue handle blue 900 ml (10576) - фото 5 - Blanks for sublimation
  • Thermal mug for sublimation with transparent lid and blue handle blue 900 ml (10576) - фото 1 - Blanks for sublimation
  • Thermal mug for sublimation with transparent lid and blue handle blue 900 ml (10576) - фото 2 - Blanks for sublimation
  • Thermal mug for sublimation with transparent lid and blue handle blue 900 ml (10576) - фото 3 - Blanks for sublimation
  • Thermal mug for sublimation with transparent lid and blue handle blue 900 ml (10576) - фото 4 - Blanks for sublimation
  • Thermal mug for sublimation with transparent lid and blue handle blue 900 ml (10576) - фото 5 - Blanks for sublimation

Thermal mug for sublimation with transparent lid and blue handle blue 900 ml (10576)

(0)
Color: Light blue
In stock
Price:
439.00 грн
Product in cart
  • The date of shipment of the goods: tomorrow (23.11.2026)
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Thermal mug for sublimation with transparent lid and blue handle blue 900 ml (10576)

A light blue tumbler with a matching handle for a dark, saturated design

 

A 900 ml steel tumbler: a light blue coating, a clear lid with a straw and a handle in the body colour. The body is wide at the top and narrower at the bottom, with a step in between; the wide Ø 9 cm upper part is printed. The double steel wall keeps drinks at temperature, and the sublimation coating is only on the outer wall. Sublimation ink is transparent: the body colour shows through the design, and the tumbler colour stays in place of any white. Dark, saturated lettering and logos look best. It is printed in a heater for a 7.5–9 cm diameter — a standard 11 oz one, or a 30 oz one in the MP170 press; the handle stays outside. MyPrint's starting settings for tumblers are 180 °C, 80 seconds, medium pressure.

900 mlvolume
Light bluecoating for dark designs
180 °Cstarting settings, 80 s
Handlein the body colour

Is this tumbler right for you

 
Your heater fits Ø 9 cm, makes close contact with the wide part and covers the full design height, and the handle stays outside
You print with sublimation ink on sublimation paper
You need a coloured tumbler for a dark, saturated logo or lettering
Compare these alternatives: the white 900 ml tumbler with a clear lid and handle and the orange 900 ml tumbler with a clear lid and handle
The design has to run onto the narrower lower part — the heater makes no contact there

Size and print settings

 
Ø 9 cmwide upper part
≈ 28.3 cmapproximate circumference of the wide part
Narrower basea step below the wide part
Temperature
180 °Cstarting point for a tumbler in a press
Time
80 sfrom closing the preheated press
Pressure
mediumthe press handle closes easily and the tumbler does not turn

These are starting settings for a heater that wraps the body all round. Tune the exact values to your press, paper, ink and room conditions — temperature and humidity — on a test tumbler.

Why this tumbler

 

A matching handle

A large volume that is easy to hold and carry

Colour without printing

The body stands out even with a simple logo

From file to finished tumbler

 
 
Prepare the layout
Measure the height of the wide part down to the step and the usable print width, allowing clearance beside the handle.
 
Print mirrored
With sublimation ink on sublimation paper.
 
Remove the lid
Together with the straw: only the body goes into the heater; the handle stays outside.
 
Fix the paper
Fit the paper tightly within the checked print area, leaving clearance beside the handle, and secure it with heat-resistant tape along the edges.
 
Key step
Press
Starting settings — 180 °C, 80 seconds, medium pressure in a 7.5–9 cm heater.
 
Remove the paper
Right after the signal, wearing heat-resistant gloves.
 
Put the lid back
Once the body has cooled completely, put the lid back in place.
Tip: Make the first tumbler from each new box a test piece. If the design blurs, give the next one 15 s less; if it is pale everywhere, check the press warm-up and paper contact, then add 10–15 s. Change one setting at a time.

Travel tumbler: which to choose

 
VariantColourVolume and lidDesign and use
Light blue with a matching handle, 900 mlYou are hereLight blue coating900 ml, clear lid and handleA dark logo on colour
White with a matching handle, 900 mlWhite background900 ml, clear lid and handlePhotos and full-colour layouts
Orange with a matching handle, 900 mlOrange coating900 ml, clear lid and handleA dark logo on colour
Lime green with a matching handle, 900 mlLime green coating900 ml, clear lid and handleA dark logo on colour
White with a black lid and handle, 900 mlWhite background900 ml, black lid and handlePhotos and full-colour layouts

Where it works best

 
Merch in brand colours
A dark logo on a coloured tumbler
Team gifts
Names on tumblers in different colours
Gyms and schools
Bright tumblers with an emblem

What can go wrong

 
A pale band on one side or a pale edge

Cause: the paper or heater does not make contact, or heating is uneven

Fix: check paper and heater contact and the press warm-up; a gap cannot be fixed with more time
A pale band at the bottom of the design

Cause: the design ran onto the step or the narrower part, where the heater makes no contact

Fix: keep the design within the wide part
White parts of the design disappeared

Cause: sublimation ink is transparent and has no white

Fix: the body colour stays in place of white: do not plan white into the design
The design blurred

Cause: overheating

Fix: give the next tumbler 15 s less
Pale all over

Cause: underheating or weak paper contact

Fix: check the press warm-up and paper contact, then add 10–15 s on the next one

Questions and answers

 

What are the print settings for this tumbler?

MyPrint's starting settings for tumblers are 180 °C, 80 seconds, medium pressure, in a heater that wraps the body all round. If the design blurs, give the next one 15 s less; if it is pale everywhere, check the warm-up and paper contact, then add 10–15 s. The exact values depend on the press, paper, ink and room conditions, so make the first tumbler from a new box a test piece.

Which heater does it need?

A mug heater for a 7.5–9 cm diameter: the standard 11 oz heater in a mug press such as the AP1803, or the 30 oz heater in the MP170 press. Ask the manager whether a heater fits your press before buying it, and before the first print check that it makes close contact with the wide part and covers the full design height, with the handle outside.

What do I do with the lid and the handle when printing?

Remove the lid with its straw. The handle stays on — it remains outside the heater.

Can white be printed?

No: sublimation ink is transparent, so white in the design is the body colour. For white elements take a white tumbler.

How should a printed tumbler be washed?

By hand, with a soft sponge, without abrasives. Never in a microwave: it is metal.

What you need for printing

 

Equipment and materials for your chosen sublimation printing method.

Характеристики Thermal mug for sublimation with transparent lid and blue handle blue 900 ml (10576)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product