Thermal mug for sublimation with black lid and black handle white 600 ml (10591) - фото 1 - Blanks for sublimation
Thermal mug for sublimation with black lid and black handle white 600 ml (10591) - фото 2 - Blanks for sublimation
Thermal mug for sublimation with black lid and black handle white 600 ml (10591) - фото 3 - Blanks for sublimation
  • Thermal mug for sublimation with black lid and black handle white 600 ml (10591) - фото 1 - Blanks for sublimation
  • Thermal mug for sublimation with black lid and black handle white 600 ml (10591) - фото 2 - Blanks for sublimation
  • Thermal mug for sublimation with black lid and black handle white 600 ml (10591) - фото 3 - Blanks for sublimation
  • Thermal mug for sublimation with black lid and black handle white 600 ml (10591) - фото 1 - Blanks for sublimation
  • Thermal mug for sublimation with black lid and black handle white 600 ml (10591) - фото 2 - Blanks for sublimation
  • Thermal mug for sublimation with black lid and black handle white 600 ml (10591) - фото 3 - Blanks for sublimation

Thermal mug for sublimation with black lid and black handle white 600 ml (10591)

(0)
Color: White
Volume:
In stock
Price:
331.00 грн
Product in cart
  • The date of shipment of the goods: tomorrow (23.11.2026)
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Thermal mug for sublimation with black lid and black handle white 600 ml (10591)

A white tumbler with a handle and a straw for photos and full-colour print

 

A 600 ml steel tumbler: a white coating for print, a black lid with a straw and a black handle. The body is wide at the top and narrower at the bottom, with a step in between; the wide Ø 9 cm upper part is printed. The double steel wall keeps drinks at temperature, and the sublimation coating is only on the outer wall. The white surface provides a background for photos, full-colour designs and text, and unprinted areas stay white. It is printed in a heater for a 7.5–9 cm diameter — a standard 11 oz one, or a 30 oz one in the MP170 press; the handle stays outside. MyPrint's starting settings for tumblers are 180 °C, 80 seconds, medium pressure.

600 mlvolume
Whitecoating for full-colour print
180 °Cstarting settings, 80 s
Handleblack, with a straw in the lid

Is this tumbler right for you

 
Your heater fits Ø 9 cm, makes close contact with the wide part and covers the full design height, and the handle stays outside
You print with sublimation ink on sublimation paper
You print photos, full-colour layouts or logos on a white background
Compare these alternatives: the silver 600 ml tumbler with a black lid and handle and the white 900 ml tumbler with a black lid and handle
The design has to run onto the narrower lower part — the heater makes no contact there

Size and print settings

 
Ø 9 cmwide upper part
≈ 28.3 cmapproximate circumference of the wide part
Narrower basea step below the wide part
Temperature
180 °Cstarting point for a tumbler in a press
Time
80 sfrom closing the preheated press
Pressure
mediumthe press handle closes easily and the tumbler does not turn

These are starting settings for a heater that wraps the body all round. Tune the exact values to your press, paper, ink and room conditions — temperature and humidity — on a test tumbler.

Why this tumbler

 

A handle and a straw

A large volume that is easy to hold and carry

A white background for photos

Photos, full-colour designs and text sit on a white background; check the colours on a test tumbler

From file to finished tumbler

 
 
Prepare the layout
Measure the height of the wide part down to the step and the usable print width, allowing clearance beside the handle.
 
Print mirrored
With sublimation ink on sublimation paper.
 
Remove the lid
Together with the straw: only the body goes into the heater; the handle stays outside.
 
Fix the paper
Fit the paper tightly within the checked print area, leaving clearance beside the handle, and secure it with heat-resistant tape along the edges.
 
Key step
Press
Starting settings — 180 °C, 80 seconds, medium pressure in a 7.5–9 cm heater.
 
Remove the paper
Right after the signal, wearing heat-resistant gloves.
 
Put the lid back
Once the body has cooled completely, put the lid back in place.
Tip: Make the first tumbler from each new box a test piece. If the design blurs or the white turns brown, give the next one 15 s less; if it is pale everywhere, check the press warm-up and paper contact, then add 10–15 s. Change one setting at a time.

Travel tumbler: which to choose

 
VariantColourVolume and lidDesign and use
White with a black lid and handle, 600 mlYou are hereWhite background600 ml, black lid and handlePhotos and full-colour layouts
Silver with a black lid and handle, 600 mlSilver metal600 ml, black lid and handleA logo on metal
White with a black lid and handle, 900 mlWhite background900 ml, black lid and handlePhotos and full-colour layouts
White with a black lid, 600 mlWhite background600 ml, black lid with a strawPhotos and full-colour layouts

Where it works best

 
A gift for the road
A photo or lettering on a tumbler for the car or the office
Corporate merch
A logo and branded layout on a white background
Gyms and cafés
A tumbler with the logo for customers

What can go wrong

 
A pale band on one side or a pale edge

Cause: the paper or heater does not make contact, or heating is uneven

Fix: check paper and heater contact and the press warm-up; a gap cannot be fixed with more time
A pale band at the bottom of the design

Cause: the design ran onto the step or the narrower part, where the heater makes no contact

Fix: keep the design within the wide part
The design blurred or the white turned brown

Cause: overheating

Fix: give the next tumbler 15 s less
Pale all over

Cause: underheating or weak paper contact

Fix: check the press warm-up and paper contact, then add 10–15 s on the next one

Questions and answers

 

What are the print settings for this tumbler?

MyPrint's starting settings for tumblers are 180 °C, 80 seconds, medium pressure, in a heater that wraps the body all round. If the design blurs, give the next one 15 s less; if it is pale everywhere, check the warm-up and paper contact, then add 10–15 s. The exact values depend on the press, paper, ink and room conditions, so make the first tumbler from a new box a test piece.

Which heater does it need?

A mug heater for a 7.5–9 cm diameter: the standard 11 oz heater in a mug press such as the AP1803, or the 30 oz heater in the MP170 press. Ask the manager whether a heater fits your press before buying it, and before the first print check that it makes close contact with the wide part and covers the full design height, with the handle outside.

What do I do with the lid and the handle when printing?

Remove the lid with its straw. The handle stays on — it remains outside the heater.

White or silver — which to choose?

For photos and full-colour layouts, white: colours sit on a white background. For a logo on metal, silver: white areas of the design stay metal.

How should a printed tumbler be washed?

By hand, with a soft sponge, without abrasives. Never in a microwave: it is metal.

What you need for printing

 

Equipment and materials for your chosen sublimation printing method.

Характеристики Thermal mug for sublimation with black lid and black handle white 600 ml (10591)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product