Thermal bottle for sublimation with metal lid and handle blue 600 ml (10597) - фото 1 - Blanks for sublimation
Thermal bottle for sublimation with metal lid and handle blue 600 ml (10597) - фото 2 - Blanks for sublimation
Thermal bottle for sublimation with metal lid and handle blue 600 ml (10597) - фото 3 - Blanks for sublimation
Thermal bottle for sublimation with metal lid and handle blue 600 ml (10597) - фото 4 - Blanks for sublimation
  • Thermal bottle for sublimation with metal lid and handle blue 600 ml (10597) - фото 1 - Blanks for sublimation
  • Thermal bottle for sublimation with metal lid and handle blue 600 ml (10597) - фото 2 - Blanks for sublimation
  • Thermal bottle for sublimation with metal lid and handle blue 600 ml (10597) - фото 3 - Blanks for sublimation
  • Thermal bottle for sublimation with metal lid and handle blue 600 ml (10597) - фото 4 - Blanks for sublimation
  • Thermal bottle for sublimation with metal lid and handle blue 600 ml (10597) - фото 1 - Blanks for sublimation
  • Thermal bottle for sublimation with metal lid and handle blue 600 ml (10597) - фото 2 - Blanks for sublimation
  • Thermal bottle for sublimation with metal lid and handle blue 600 ml (10597) - фото 3 - Blanks for sublimation
  • Thermal bottle for sublimation with metal lid and handle blue 600 ml (10597) - фото 4 - Blanks for sublimation

Thermal bottle for sublimation with metal lid and handle blue 600 ml (10597)

(0)
Color: Light blue
Volume:
In stock
Price:
331.00 грн
Product in cart
  • The date of shipment of the goods: 2026-11-23
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Thermal bottle for sublimation with metal lid and handle blue 600 ml (10597)

A light blue bottle with a steel cap for a dark, saturated design

 

A 600 ml steel bottle: a light blue coating, a steel cap with a carry ring. The body is straight, with rounded shoulders; the straight Ø 7.3 cm part is printed. The double steel wall keeps drinks at temperature, and the sublimation coating is only on the outer wall. Sublimation ink is transparent: the body colour shows through the design, and the bottle colour stays in place of any white. Dark, saturated lettering and logos look best. The Ø 7.3 cm body is printed in a 6.5–7.5 cm tumbler heater: a standard 11 oz heater is made for 7.5–9 cm and will not wrap this body closely. As a start, use MyPrint's settings for steel tumblers — 180 °C, 80 seconds, medium pressure — and confirm them on a test bottle.

600 mlvolume
Light bluecoating for dark designs
180 °Cstart, 80 s
Carry ringon the steel cap

Is this bottle right for you

 
Your tumbler heater fits the Ø 7.3 cm body, makes close contact and covers the full design height
You print with sublimation ink on sublimation paper
You need a coloured bottle for a dark, saturated logo or lettering
Compare these alternatives: the light blue 750 ml bottle with a steel cap and the white 600 ml bottle with a steel cap
You only print in a standard 11 oz heater for 7.5–9 cm — it will not wrap the Ø 7.3 cm body closely

Size and print settings

 
Ø 7.3 cmstraight body
≈ 22.9 cmapproximate body circumference
Shoulders and neckoutside the print area
Temperature
180 °Cstart for a steel bottle in a press
Time
80 sfrom closing the preheated press
Pressure
mediumthe handle closes easily and the bottle does not turn

These are MyPrint's starting settings for steel tumblers in a heater that wraps the body all round; for the bottle, confirm them on a test piece. Tune the exact values to your press, paper, ink and room conditions — temperature and humidity.

Why this bottle

 

A carry ring on the cap

The bottle is easy to carry by hand or clip to a backpack

Colour without printing

The body stands out even with a simple logo

From file to finished bottle

 
 
Prepare the layout
Measure the height of the straight body up to the shoulders and its circumference; add a paper overlap at the seam.
 
Print mirrored
With sublimation ink on sublimation paper.
 
Remove the lid
Only the steel body goes into the heater.
 
Fix the paper
Tightly all round on the straight part, with an overlap at the seam, and secure it with heat-resistant tape along the edges and the seam.
 
Key step
Press
Starting settings — 180 °C, 80 seconds, medium pressure in a 6.5–7.5 cm tumbler heater.
 
Remove the paper
Right after the signal, wearing heat-resistant gloves.
 
Put the lid back
Once the body has cooled completely, put the lid back in place.
Tip: Make the first piece from each new box a test piece. If the design blurs, give the next one 15 s less; if it is pale everywhere, check the press warm-up and paper contact, then add 10–15 s. Change one setting at a time.

Bottle with a handle: which to choose

 
VariantColourVolume and lidDesign and use
Light blue with a steel cap, 600 mlYou are hereLight blue coating600 ml, steel cap with a ringA dark logo on colour
Light blue with a steel cap, 750 mlLight blue coating750 ml, steel cap with a ringA dark logo on colour
White with a steel cap, 600 mlWhite background600 ml, steel cap with a ringPhotos and full-colour layouts
Pink with a steel cap, 600 mlPink coating600 ml, steel cap with a ringA dark logo on colour
Yellow with a steel cap, 600 mlYellow coating600 ml, steel cap with a ringA dark logo on colour

Where it works best

 
Merch in brand colours
A dark logo on a coloured bottle
Team gifts
Names on bottles in different colours
Schools and sports clubs
Bright bottles with an emblem

What can go wrong

 
A pale band on one side or a pale edge

Cause: the paper or heater does not make contact, or heating is uneven

Fix: check paper and heater contact and the press warm-up; a gap cannot be fixed with more time
A pale band near the shoulders

Cause: the design ran past the straight part, where the heater makes no contact

Fix: keep the design within the straight part of the body
White parts of the design disappeared

Cause: sublimation ink is transparent and has no white

Fix: the body colour stays in place of white: do not plan white into the design
The design blurred

Cause: overheating

Fix: give the next piece 15 s less
Pale all over

Cause: underheating or weak paper contact

Fix: check the press warm-up and paper contact, then add 10–15 s on the next one
A line at the seam

Cause: the paper parted at the seam

Fix: leave an overlap and tape the seam along its length

Questions and answers

 

What are the print settings for this bottle?

As a start, use MyPrint's settings for steel tumblers — 180 °C, 80 seconds, medium pressure, in a heater that wraps the body all round. If the design blurs, give the next one 15 s less; if it is pale everywhere, check the warm-up and paper contact, then add 10–15 s. The exact values depend on the press, paper, ink and room conditions, so make the first bottle from a new box a test piece.

Will an ordinary mug press do?

A standard 11 oz heater is made for a 7.5–9 cm diameter, so it will not wrap the Ø 7.3 cm body closely. You need a 6.5–7.5 cm tumbler heater: the 22 × 21.5 cm heating element or the MP160 tumbler press, which comes with such a heater. Ask the manager whether a heater fits your press before buying it, and before the first print check that it makes close contact with the body and covers the full design height.

What do I do with the cap when printing?

Remove it together with the carry ring: only the steel body goes into the heater. Put it back once the body has cooled completely.

Can I print in a sublimation oven?

Yes, after checking the dimensions: remove the lid, wrap only the steel body in paper and fit shrink film sized to the body. Check that the body with its paper and film fits inside the HO-16 oven, then preheat the oven. MyPrint's starting point for steel tumblers is 180 °C for 4–5 minutes; confirm it on a test piece. Tune the exact values to the oven, paper, ink, film and room conditions, including temperature and humidity; change one setting at a time. Remove the film and paper immediately after transfer, wearing heat-resistant gloves.

Can white be printed?

No: sublimation ink is transparent, so white in the design is the body colour. For white elements take a white bottle.

How should a printed piece be washed?

By hand, with a soft sponge, without abrasives. Never in a microwave: it is metal.

What you need for printing

 

Equipment and materials for your chosen sublimation printing method.

Характеристики Thermal bottle for sublimation with metal lid and handle blue 600 ml (10597)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product