Metal for sublimation is worn steel 20*30.5 cm (6737)
- The date of shipment of the goods: 2026-11-23
- Ask a question for this product
Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.
- Return guarantee
We guarantee a refund if you are not satisfied with the product
- Доставка
Delivery across Ukraine to any settlement
Description Metal for sublimation is worn steel 20*30.5 cm (6737)
Aluminium sheet with a steel-look base and a brushed surface
Aluminium sheet with a special sublimation coating: under the press the dye from the paper sinks into the coating and the image becomes part of the surface. The coating is clear: where there is no dye, the base itself shows — steel-look metal.
Is this sheet right for you
Sizes and press settings
These are starting settings: the exact ones depend on your press, paper, inks and room conditions — temperature and humidity.
Why this sheet
Metal in the design
Blank areas show the steel-look finish: black lettering on bare metal looks like a classic metal plate
Brushed surface
The brushed texture creates a decorative effect. Check how strongly it shows through your image on a test print.
0.45 mm thick
the most common thickness in our range; aluminium is cut with a guillotine metal cutter
No minimum order
You can buy a single sheet for a specific order
From file to finished plate
Sublimation metal: what to choose
| Variant | Thickness | Base | Surface | Best for |
|---|---|---|---|---|
| 20 × 30.5 cmYou are here | 0.45 mm | steel-look | brushed | Plates, photos, business cards after cutting |
| 61 × 30.5 cm | 0.45 mm | steel-look | brushed | A wall panel or several plates from one sheet |
Where it works best
What can go wrong
Cause: overheating: too many degrees or seconds
Cause: possible underheating, uneven contact or unsuitable materials
Cause: uneven pressure or cold spots on the platen
Cause: the paper shifted during pressing or removal
Cause: the film came off too early or the plate was held by its face
Cause: sublimation does not print white: blank areas show the metal
Questions and answers
Can I print white?
Which side do I print on?
Can I cut the sheet?
Which press will do?
What temperature and time?
How do the thicknesses differ?
Can I hang it outdoors?
What you need for printing
What you need to turn the sheet into a finished plate or photo panel.






































