Cup for sublimation colored inside with colored handle latte orange (250 ml) (6428) - фото 1 - Blanks for sublimation
Cup for sublimation colored inside with colored handle latte orange (250 ml) (6428) - фото 2 - Blanks for sublimation
  • Cup for sublimation colored inside with colored handle latte orange (250 ml) (6428) - фото 1 - Blanks for sublimation
  • Cup for sublimation colored inside with colored handle latte orange (250 ml) (6428) - фото 2 - Blanks for sublimation
  • Cup for sublimation colored inside with colored handle latte orange (250 ml) (6428) - фото 1 - Blanks for sublimation
  • Cup for sublimation colored inside with colored handle latte orange (250 ml) (6428) - фото 2 - Blanks for sublimation

Cup for sublimation colored inside with colored handle latte orange (250 ml) (6428)

(0)
Color: Orange
Not available
Price:
87.00 грн
  • Buy a box36 штук - 3132 грн
  • Report availability
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Cup for sublimation colored inside with colored handle latte orange (250 ml) (6428)

A latte mug with an orange interior and hook handle

 

A latte mug for a café or a coffee gift: the logo or name goes on the white wall, and the mug colour is chosen to match the brand.

Orangeinterior and handle
250 mlvolume
200 °Cstarting settings, 240 s
Conical heater12 oz, check the fit

Is this mug right for you

 
Your 12 oz conical heater makes close contact with this mug's conical wall and covers the full design height, with clearance for the handle
You print with sublimation ink on sublimation paper
You need coloured latte mugs for a café or coffee gifts
You need a larger mug — consider this 350 ml model with a closed handle: orange inside, 12 oz
You want a different colour — consider these 12 oz latte mugs: yellow inside, 12 oz or red inside, 12 oz
You only print in a straight heater for ordinary mugs — the narrow part of the cone will come out pale

Size and print settings

 
Conicalshape, tapers to the base
Arclayout for the cone
Whiteouter wall for printing
Glossysurface
Temperature
200 °Cstarting point for a latte mug
Time
240 scount from closing the preheated press
Pressure
mediumthe handle goes down with moderate resistance

These are starting settings: the exact ones are tuned to your press, paper, ink and room conditions — temperature and humidity.

Why this mug

 

A coffee-shop shape

A conical latte mug looks like café tableware — for a venue logo or a coffee gift

An open hook handle

The handle joins the wall at the top only — an unusual silhouette among ordinary mugs

From file to finished mug

 
 
Make an arc template
Wrap the mug in a sheet from handle to handle, trace the top and bottom edges and step in 5 mm from each.
 
Prepare the layout
Fit the design into the template's arc; keep important elements away from the handle.
 
Print mirrored
With sublimation ink on the white side of sublimation paper.
 
Fix the paper
Wrap the mug tightly with no gaps and secure the edges with heat-resistant tape.
 
Place it in the heater
The wide edge of the mug goes in the wide end of the conical heater, with the handle facing up.
 
Key step
Press
Starting settings — 200 °C, 240 seconds, medium pressure.
 
Remove the paper
Right after the signal, wearing heat-resistant gloves, without sliding the sheet over the hot surface.
Tip: Group latte orders into one batch: after a heater swap the press needs to warm up again. Make the first mug of a batch a test piece and tune the starting settings, changing one setting at a time.

Latte mug: which to choose

 
VariantColour or finishVolumeFor whom
Orange inside, 250 mlYou are hereOrange interior and hook handle250 mlEnergetic, bright designs
Orange inside, 12 ozOrange interior and handle350 mlEnergetic, bright designs
Yellow inside, 12 ozYellow interior and handle350 mlSunny, bright designs
Red inside, 12 ozRed interior and handle350 mlFestive and bright designs
White, 12 oz (350 ml)White350 mlClassic: full-colour print

Where it works best

 
Cafés and coffee brands
Latte mugs with the café's logo for use in the café or for sale to customers
Coffee gift sets
A personalised latte mug together with coffee in a set
Corporate merch
A logo on a latte mug for the office kitchen or partners

What can go wrong

 
Pale narrow part

Cause: a straight heater does not sit against the cone

Fix: use a conical heater of the mug's size for a trial only after checking close contact across the entire print area
Skewed design

Cause: a rectangular layout on a cone

Fix: fit the design into an arc using a template taken from the mug
Ghosted outline

Cause: the paper shifted on the hot mug

Fix: tape the edges and remove the sheet in one motion
The white area turns yellow

Cause: overheating: too many degrees or seconds

Fix: on a fresh test mug, adjust the starting settings, changing one setting at a time
The print faded within a few months

Cause: dishwasher and abrasive sponges

Fix: wash by hand with a soft sponge — the print keeps its brightness longer

Questions and answers

 

Which heater does it need?

A conical one that wraps this particular mug snugly: the candidate is the 12 oz latte mug heating element. Before the first print, check that the heater makes close contact with the cone and covers the full design height; in a straight heater the narrow part comes out pale.

How do I make a layout for a conical mug?

Wrap the mug in a sheet from handle to handle, trace the top and bottom edges and step in 5 mm — that is the arc template. Fit the design into it: a rectangular layout skews on a cone.

What temperature does it need?

The starting settings are 200 °C and 240 seconds with medium pressure. Tune the exact values to your press, paper, ink and room conditions on a test mug.

Can I print inside or on the handle?

No: the sublimation coating is only on the white outer wall; the interior and handle are coated with coloured glaze.

How should a sublimated mug be washed?

By hand, with a soft sponge and a mild detergent. The print keeps its brightness longer, so pass this tip on to your customer with the mug.

What you need for printing

 

Everything it takes to turn this mug into a finished product: a conical heater, paper, ink and heat-resistant tape.

Характеристики Cup for sublimation colored inside with colored handle latte orange (250 ml) (6428)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product