Sublimation mug metal white with black carabiner (300 ml) (9738) - фото 1 - Blanks for sublimation
Sublimation mug metal white with black carabiner (300 ml) (9738) - фото 2 - Blanks for sublimation
Sublimation mug metal white with black carabiner (300 ml) (9738) - фото 3 - Blanks for sublimation
  • Sublimation mug metal white with black carabiner (300 ml) (9738) - фото 1 - Blanks for sublimation
  • Sublimation mug metal white with black carabiner (300 ml) (9738) - фото 2 - Blanks for sublimation
  • Sublimation mug metal white with black carabiner (300 ml) (9738) - фото 3 - Blanks for sublimation
  • Sublimation mug metal white with black carabiner (300 ml) (9738) - фото 1 - Blanks for sublimation
  • Sublimation mug metal white with black carabiner (300 ml) (9738) - фото 2 - Blanks for sublimation
  • Sublimation mug metal white with black carabiner (300 ml) (9738) - фото 3 - Blanks for sublimation

Sublimation mug metal white with black carabiner (300 ml) (9738)

(0)
Color: White
Handle color: Black
Volume:
In stock
Price:
179.00 грн
Product in cart
  • The date of shipment of the goods: tomorrow (20.11.2026)
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Sublimation mug metal white with black carabiner (300 ml) (9738)

A metal carabiner mug for printing

 

A 300 ml double-wall stainless steel mug: a white body with a sublimation coating, with a black carabiner instead of a handle. The carabiner works both as a handle and as a hook for a backpack strap, and metal is less fragile than ceramics, so the mug is easy to take hiking, on duty or to send by post. The straight Ø 7.5 cm body can be printed in a mug press once the heater has been checked for a close fit and coverage over the full design height, and MyPrint's starting settings are 180 °C for 60 seconds. The white coating provides a base for photos and full-colour designs; unprinted areas remain white.

300 mlvolume
Stainless steeldouble wall
180 °Cstarting settings, 60 s
Carabinerhandle and backpack hook

Is this mug right for you

 
You have a mug or combo heat press; before printing, check heater contact with the body and coverage over the height of your design
You print with sublimation ink on sublimation paper
You need a mug for the road: hiking, duty, a parcel for the military or a child's gift
You want the metal to be part of the design — there is a silver 300 ml metal mug
You need a different volume — there is the same mug in 400 ml
Drinks get heated in a microwave — a metal mug never goes in there; take the ceramic white Premium+ 11 oz

Size and print settings

 
Ø 7.5 cmdiameter
Straightwall, rounded edge at the base
Whitecoating for printing
Blackcarabiner instead of a handle
Temperature
180 °Cstarting point for a metal mug
Time
60 scount from closing the preheated press
Pressure
mediumthe press handle closes easily, the mug does not turn

These are starting settings for a press. Tune the exact values to your press, paper, ink and room conditions — temperature and humidity — on a test mug.

Why this mug

 

A carabiner instead of a handle

The mug clips onto a backpack strap or belt and keeps your hands free on the road

Less fragile than ceramics

Metal handles a trip in a backpack or a parcel better than a ceramic mug

A white background for photos

The white coating provides a base for photos and full-colour designs, and unprinted areas remain white

Three carabiner colours

The same mug with a silver, black or red carabiner — to match a brand, team or unit

From file to finished mug

 
 
Prepare the layout
Measure the height of the straight part of the wall and the circumference without the handle zone on the mug itself; keep important elements away from the handle and from the rounded edge at the base.
 
Print mirrored
With sublimation ink on sublimation paper.
 
Fix the paper
Wrap the body tightly with no gaps and secure the edges with heat-resistant tape.
 
Place it in the heater
The carabiner stays outside, in the heater gap, and the heater wraps the body tightly.
 
Key step
Press
Starting settings — 180 °C, 60 seconds, medium pressure in a mug heater checked for body fit and coverage over the design height.
 
Remove the paper
Right after the signal, wearing heat-resistant gloves, without sliding the sheet over the hot metal.
 
Let it cool
The metal stays hot for a few minutes; after that the mug can be packed.
Tip: Make the first mug from a new batch a test piece: tune the starting settings to your press, paper and ink, changing one setting at a time.

Metal mug: which to choose

 
VariantBodyVolumeHandle
White, black carabiner, 300 mlYou are hereWhite coating300 mlBlack carabiner
White, silver carabiner, 300 mlWhite coating300 mlSilver carabiner
White, red carabiner, 300 mlWhite coating300 mlRed carabiner
Silver, black carabiner, 300 mlSilver metal300 mlBlack carabiner
White, black carabiner, 400 mlWhite coating400 mlBlack carabiner
White, metal handle, 300 mlWhite coating300 mlMetal handle

Where it works best

 
A gift for the military
A call sign, unit emblem or child's drawing on a mug that is less fragile than ceramics — for a parcel to the front
Hiking and camps
Personalised mugs for a hike, a camp or a sports team: the carabiner clips onto a backpack
Corporate merch
A logo on a metal mug for the team, partners and gift sets

What can go wrong

 
Pale band near the base

Cause: the rounded edge at the base presses against the heater less than the wall

Fix: keep important elements on the straight part of the wall
Pale patches around the mug

Cause: the heater does not wrap the body tightly: Ø 7.5 cm is the lower limit of a standard 7.5–9 cm heater

Fix: check that the heater sits tight against the body all the way round
The white area turns yellow

Cause: overheating: too many degrees or seconds

Fix: on a fresh test mug, reduce either time or temperature, changing one setting at a time
Ghosted outline

Cause: the paper shifted on the hot metal

Fix: tape the edges and remove the sheet in one motion
The print faded

Cause: dishwasher and abrasive sponges

Fix: wash by hand with a soft sponge — the print keeps its brightness longer

Questions and answers

 

What are the print settings for a metal mug?

The starting settings are 180 °C, 60 seconds, medium pressure in a mug heater checked for body fit and coverage over the design height. The exact values depend on your press, paper, ink and room conditions, so make the first mug from a new batch a test piece.

Will an ordinary mug press work?

Compare the Ø 7.5 cm body diameter and design height with the working area of the specific heater. Before printing, check close contact with the straight wall and clearance for the handle or carabiner. Consider the AP1803 after these checks.

Can I print on the carabiner?

No: the sublimation coating is only on the body, and the carabiner is a separate metal part. In the press it stays outside, in the heater gap.

How is a white metal mug different from a ceramic one?

The print goes onto the white coating in the same way, but the body is metal: it is less fragile and handles travel better. A metal mug never goes in the microwave.

Can it go in the microwave or dishwasher?

Never in the microwave: it is metal. Wash by hand with a soft, non-abrasive sponge — the print keeps its brightness longer.

How do the 300 and 400 ml mugs differ?

In volume and diameter: Ø 7.5 and 8.2 cm. Both diameters are within the 7.5–9 cm range of a standard mug heater.

What you need for printing

 

Everything it takes to turn this mug into a finished gift: a press, paper, ink and heat-resistant tape.

Характеристики Sublimation mug metal white with black carabiner (300 ml) (9738)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product