Sublimation mug white tapered at the bottom (280 ml) (10473) - фото 1 - Blanks for sublimation
  • Sublimation mug white tapered at the bottom (280 ml) (10473) - фото 1 - Blanks for sublimation
  • Sublimation mug white tapered at the bottom (280 ml) (10473) - фото 1 - Blanks for sublimation

Sublimation mug white tapered at the bottom (280 ml) (10473)

(0)
In stock
Price:
62.00 грн
Product in cart
  • The date of shipment of the goods: tomorrow (20.11.2026)
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Sublimation mug white tapered at the bottom (280 ml) (10473)

A white mug narrowing to the base, printed on its straight wall

 

A white 280 ml ceramic mug: a straight wall at the top and a lower section that tapers towards the base. The print goes on the straight part of the wall, where the heater makes close contact; a straight heater does not make close contact with the tapered lower section. Ø 8 cm is within the range of a standard 11 oz heater (7.5–9 cm); before the first print, check that the heater makes close contact with the straight part and covers the full design height. MyPrint's starting settings are 180–200 °C for 180 seconds.

Taperedlower section
280 mlvolume
180–200 °Cstarting settings, 180 s
Singlyfor a specific order

Is this mug right for you

 
Your heater matches the body diameter, makes close contact with the smooth print area and covers the full design height, with clearance for the handle
You print with sublimation ink on sublimation paper
You need a white mug of an unusual shape for a photo, a name or a logo
You need a classic cylindrical mug — there is the white Premium+ 11 oz
You need the design down to the very base — the heater does not make close contact with the tapered lower section, and the lower part will come out pale

Size and print settings

 
Ø 8 cmdiameter
Whitewall for printing
Ceramicmaterial
Glossysurface
Temperature
180–200 °Cstarting point for a white ceramic mug
Time
180 scount from closing the preheated press
Pressure
firmthe press handle closes with effort

These are starting settings: the exact ones are tuned to your press, paper, ink and room conditions — temperature and humidity.

Why this mug

 

An unusual shape

The tapered lower section sets the mug apart from standard cylinders

A white wall for the design

A background for photos, lettering and logos on the straight part of the wall

From file to finished mug

 
 
Prepare the layout
Measure the height of the straight part of the wall and the circumference without the handle zone; keep the design off the tapered lower section.
 
Print mirrored
With sublimation ink on the white side of sublimation paper.
 
Let it dry
The paper dries quickly; a damp print blurs the outline.
 
Fix the paper
Wrap the mug tightly with no gaps and secure the edges with heat-resistant tape.
 
Key step
Press
Starting settings — 180–200 °C, 180 seconds, firm pressure.
 
Remove the paper
Right after the signal, wearing heat-resistant gloves, without sliding the sheet over the hot surface.
 
Let it cool
Let the mug cool completely before packing it.
Tip: Make the first mug of a batch a test piece: tune the starting settings to your press, paper, ink and room conditions, changing one setting at a time.

A white mug in a special format: which to choose

 
VariantShapeVolumeBest for
White, narrowing to the base, 280 mlYou are hereNarrowing to the base280 mlAn unusual shape for everyday coffee
White Premium+ 11 ozCylindrical330 mlClassic: photos and logos
White 450 mlCylindrical450 mlA bigger serving of tea or coffee
White with a spoon, 330 mlCylindrical, spoon in the handle330 mlA gift that comes with a spoon

Where it works best

 
Gifts
A photo or a name on a mug of an unusual shape
Cafés
Branded mugs with a logo for guests
Home
A mug for everyday coffee with a favourite picture

What can go wrong

 
Pale band near the base

Cause: the heater does not touch the wall on the tapered lower section

Fix: keep the design on the straight part of the wall
Ghosted outline

Cause: the paper shifted on the hot mug

Fix: tape the edges and remove the sheet in one motion without dragging it over the surface
The white area turns yellow

Cause: overheating: too many degrees or seconds

Fix: on a fresh test mug, adjust the starting settings by reducing either time or temperature, changing one setting at a time
The print faded within a few months

Cause: dishwasher and abrasive sponges

Fix: wash by hand with a soft sponge — the print keeps its brightness longer

Questions and answers

 

Can the design go down to the very base?

No: on the tapered lower section a standard heater does not touch the wall, so keep the design on the straight part.

Which press will do?

A mug heat press whose heater wraps the Ø 8 cm body tightly and covers the full design height, for example with a standard 11 oz heater for 7.5–9 cm in the AP1803 press; check this before the first print.

What temperature does mug sublimation need?

The starting settings are 180–200 °C and 180 seconds with firm pressure. The exact values depend on your press, paper, ink and room conditions, so make the first mug of a batch a test piece.

How should this mug be washed?

By hand, with a soft sponge and a mild detergent. The print keeps its brightness longer — pass this tip on to your customer with the mug.

What you need for printing

 

Everything it takes to turn this mug into a finished gift: a press, paper, ink and packaging.

Характеристики Sublimation mug white tapered at the bottom (280 ml) (10473)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product