Sublimation Cup White Latte 17 Oz (500 ml) (2066) - фото 1 - Blanks for sublimation
Sublimation Cup White Latte 17 Oz (500 ml) (2066) - фото 2 - Blanks for sublimation
Sublimation Cup White Latte 17 Oz (500 ml) (2066) - фото 3 - Blanks for sublimation
  • Sublimation Cup White Latte 17 Oz (500 ml) (2066) - фото 1 - Blanks for sublimation
  • Sublimation Cup White Latte 17 Oz (500 ml) (2066) - фото 2 - Blanks for sublimation
  • Sublimation Cup White Latte 17 Oz (500 ml) (2066) - фото 3 - Blanks for sublimation
  • Sublimation Cup White Latte 17 Oz (500 ml) (2066) - фото 1 - Blanks for sublimation
  • Sublimation Cup White Latte 17 Oz (500 ml) (2066) - фото 2 - Blanks for sublimation
  • Sublimation Cup White Latte 17 Oz (500 ml) (2066) - фото 3 - Blanks for sublimation

Sublimation Cup White Latte 17 Oz (500 ml) (2066)

(0)
Volume:
In stock
Price:
85.00 грн
Product in cart
  • The date of shipment of the goods: tomorrow (20.11.2026)
  • Buy a box24 штук - 2040 грн
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Sublimation Cup White Latte 17 Oz (500 ml) (2066)

A white 17 oz latte mug for printing

 

A 500 ml ceramic latte mug that tapers towards the base. The outside is white with a sublimation coating. Because of the conical shape it is pressed in a conical heater of its size — 17 oz — and a rectangular layout skews on a cone, so the design is fitted into an arc. The starting settings are 200 °C, 240 seconds, medium pressure.

Whiteoutside and inside
500 ml17 oz volume
200 °Cstarting settings, 240 s
24 pcsper box, or buy singly

Is this mug right for you

 
Your 17 oz conical heater makes close contact with the conical wall and covers the full design height, with clearance for the handle
You print with sublimation ink on sublimation paper
You need mugs for a café or coffee gift sets: latte, cappuccino, large servings
You need another volume — there is the White, 12 oz (350 ml); it needs a 12 oz conical heater
You want another colour or finish — there is, for example, Red inside, 17 oz or Gold rim and handle, 17 oz (500 ml)
You only print in a straight heater for ordinary mugs — the narrow part of the cone will come out pale

Size and print settings

 
Conicalshape, tapers to the base
Arclayout for the cone
Ceramicmaterial
Glossysurface
Temperature
200 °Cstarting point for a latte mug
Time
240 scount from closing the preheated press
Pressure
mediumthe handle goes down with moderate resistance

These are starting settings: the exact ones are tuned to your press, paper, ink and room conditions — temperature and humidity.

Why this mug

 

A coffee-shop shape

A conical latte mug looks like café tableware — for a venue logo or a coffee gift

A large serving

500 ml for people who drink coffee from big mugs

A white wall for the design

A background for photos and text; size the design to the arc template and leave clearance around the handle

From file to finished mug

 
 
Make an arc template
Wrap the mug in a sheet from handle to handle, trace the top and bottom edges and step in 5 mm from each.
 
Prepare the layout
Fit the design into the template's arc; keep important elements away from the handle.
 
Print mirrored
With sublimation ink on the white side of sublimation paper.
 
Fix the paper
Wrap the mug tightly with no gaps and secure the edges with heat-resistant tape.
 
Place it in the heater
The wide edge of the mug goes in the wide end of the 17 oz conical heater, with the handle facing up.
 
Key step
Press
Starting settings — 200 °C, 240 seconds, medium pressure.
 
Remove the paper
Right after the signal, wearing heat-resistant gloves, without sliding the sheet over the hot surface.
Tip: Group latte orders into one batch: after a heater swap the press needs to warm up again. Make the first mug of a batch a test piece and tune the starting settings, changing one setting at a time.

Latte mug: which to choose

 
VariantColour or finishVolumeFor whom
White, 17 oz (500 ml)You are hereWhite500 mlClassic: full-colour print
Red inside, 17 ozRed interior and handle500 mlFestive and bright designs
Gold rim and handle, 17 oz (500 ml)Gold rim and handle500 mlFestive and premium gifts
White, 12 oz (350 ml)White350 mlClassic: full-colour print

Where it works best

 
Cafés and coffee brands
Latte mugs with the café's logo for use in the café or for sale to customers
Coffee gift sets
A personalised latte mug together with coffee in a set
Corporate merch
A logo on a latte mug for the office kitchen or partners

What can go wrong

 
Pale narrow part

Cause: a straight heater does not sit against the cone

Fix: use a conical heater of the mug's size for a trial only after checking close contact across the entire print area
Skewed design

Cause: a rectangular layout on a cone

Fix: fit the design into an arc using a template taken from the mug
Ghosted outline

Cause: the paper shifted on the hot mug

Fix: tape the edges and remove the sheet in one motion
The white area turns yellow

Cause: overheating: too many degrees or seconds

Fix: on a fresh test mug, adjust the starting settings, changing one setting at a time
The print faded within a few months

Cause: dishwasher and abrasive sponges

Fix: wash by hand with a soft sponge — the print keeps its brightness longer

Questions and answers

 

Which heater does it need?

A conical heater of its size: 17 oz for 500 ml, for example the 17 oz latte mug heating element. According to the product cards, conical heaters fit the MP160 and HP multifunction heat presses; in a straight heater the narrow part comes out pale. Before the first print, check that the heater makes close contact with the cone and covers the full design height.

How do I make a layout for a conical mug?

Wrap the mug in a sheet from handle to handle, trace the top and bottom edges and step in 5 mm — that is the arc template. Fit the design into it: a rectangular layout skews on a cone.

What temperature does it need?

The starting settings are 200 °C and 240 seconds with medium pressure. Tune the exact values to your press, paper, ink and room conditions on a test mug.

How many mugs are in a box?

24. You can also buy the mug singly — as many as the order needs.

How should a sublimated mug be washed?

By hand, with a soft sponge and a mild detergent. The print keeps its brightness longer, so pass this tip on to your customer with the mug.

What you need for printing

 

Everything it takes to turn this mug into a finished product: a conical heater, paper, ink and heat-resistant tape.

Характеристики Sublimation Cup White Latte 17 Oz (500 ml) (2066)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product