Sublimation Mug white (450 ml) (12692) - фото 1 - Blanks for sublimation
Sublimation Mug white (450 ml) (12692) - фото 2 - Blanks for sublimation
  • Sublimation Mug white (450 ml) (12692) - фото 1 - Blanks for sublimation
  • Sublimation Mug white (450 ml) (12692) - фото 2 - Blanks for sublimation
  • Sublimation Mug white (450 ml) (12692) - фото 1 - Blanks for sublimation
  • Sublimation Mug white (450 ml) (12692) - фото 2 - Blanks for sublimation

Sublimation Mug white (450 ml) (12692)

(0)
Stackable:
In stock
Price:
65.00 грн
Product in cart
  • The date of shipment of the goods: tomorrow (20.11.2026)
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Sublimation Mug white (450 ml) (12692)

A white 450 ml mug: a bigger serving

 

A white 450 ml ceramic mug with a straight wall for sublimation. Size the photo or logo to the heater's working area and leave clearance around the handle. Ø 8.5 cm is within the range of both a standard 11 oz heater (7.5–9 cm) and a 15 oz heater (8–9.5 cm); before the first print, check that the heater makes close contact with the body and covers the full design height. For a large mug the MyPrint guide recommends a longer time — starting settings of 200 °C for 200 seconds.

450 mlbigger than 11 oz
Ø 8.5 cmdiameter
200 °Cstarting settings, 200 s
Singlyfor a specific order

Is this mug right for you

 
Your heater matches the body diameter, makes close contact with the smooth print area and covers the full design height, with clearance for the handle
You print with sublimation ink on sublimation paper
You need more capacity than a standard 11 oz mug for tea or coffee with milk
You need a standard mug — there is the white Premium+ 11 oz or the white 15 oz, 425 ml
Your design is taller than your heater's working area — the top and bottom edges will come out pale; check the design height against the heater

Size and print settings

 
Cylindricalstraight wall
Whitewall for printing
Ceramicmaterial
Glossysurface
Temperature
200 °Cstarting point for a large ceramic mug
Time
200 scount from closing the preheated press
Pressure
firmthe press handle closes with effort

These are starting settings: the exact ones are tuned to your press, paper, ink and room conditions — temperature and humidity.

Why this mug

 

A big serving

450 ml for tea or milky coffee

From file to finished mug

 
 
Prepare the layout
Measure the wall height and the circumference without the handle zone on the mug itself; check the design height against the heater's working area.
 
Print mirrored
With sublimation ink on the white side of sublimation paper.
 
Let it dry
The paper dries quickly; a damp print blurs the outline.
 
Fix the paper
Wrap the mug tightly with no gaps and secure the edges with heat-resistant tape.
 
Key step
Press
Starting settings — 200 °C, 200 seconds, firm pressure.
 
Remove the paper
Right after the signal, wearing heat-resistant gloves, without sliding the sheet over the hot surface.
 
Let it cool
Let the mug cool completely before packing it.
Tip: Make the first mug of a batch a test piece: tune the starting settings to your press, paper, ink and room conditions, changing one setting at a time.

A white mug in a special format: which to choose

 
VariantShapeVolumeBest for
White 450 mlYou are hereCylindrical450 mlA bigger serving of tea or coffee
White 15 ozCylindrical425 mlA big serving
White Premium+ 11 ozCylindrical330 mlClassic: photos and logos
White, narrowing to the base, 280 mlNarrowing to the base280 mlAn unusual shape for everyday coffee

Where it works best

 
The office
A big tea mug with the company logo
Gifts
A photo or lettering on a mug bigger than the standard
Merch
Branded 450 ml mugs for a shop or an event

What can go wrong

 
Pale edges at the top or bottom

Cause: the design is taller than the heater's working area

Fix: match the design height to the heater height
Ghosted outline

Cause: the paper shifted on the hot mug

Fix: tape the edges and remove the sheet in one motion without dragging it over the surface
The white area turns yellow

Cause: overheating: too many degrees or seconds

Fix: on a fresh test mug, adjust the starting settings by reducing either time or temperature, changing one setting at a time
The print faded within a few months

Cause: dishwasher and abrasive sponges

Fix: wash by hand with a soft sponge — the print keeps its brightness longer

Questions and answers

 

Why is the time longer than for an ordinary mug?

For this 450 ml model, use 200 °C for 200 seconds as a starting point adapted from the MyPrint guide's 425 ml row. Tune it with trial transfers for your press, paper, ink, room temperature and humidity, changing one setting at a time.

Which heater will do?

Ø 8.5 cm fits both a standard 11 oz heater (7.5–9 cm, 12 cm high) and a 15 oz heater, for example the 15 × 25 cm heating element (8–9.5 cm, 15 cm high). Choose the one that covers the full height of your design, and check the close contact before the first print.

How should this mug be washed?

By hand, with a soft sponge and a mild detergent. The print keeps its brightness longer — pass this tip on to your customer with the mug.

What you need for printing

 

Everything it takes to turn this mug into a finished gift: a press, paper, ink and packaging.

Характеристики Sublimation Mug white (450 ml) (12692)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product