Cap tracker for thermal transfer is black (9273)

You can apply the image on Cap tracker for thermal transfer is black using the DTF printing method and thermal transfer.

To apply an image to a workpiece using the DTF printing method, you need:

• Heat presses for caps or Multifunctional Thermopresses;
• DTF printer filled with ink for DTF printing;
• Film for DTF printing;
• Hot melt powder for DTF printing;
• Thermal tape;
• Cap tracker for thermal transfer is black.

DTF printing on the workpiece consists of several stages:

1. We print the prepared image on DTF film. It must be taken into account that the image must be printed in a mirror image.
2. Sprinkle with glue and dry in a dryer or heat press.
3. We cut out the image and fix it on the workpiece with thermal tape.
4. We place our workpiece in the thermopress and press the button to start the countdown.
5. After the set time has elapsed, a beep will sound. We take out the product, let it cool and remove the film.

To put an image using the thermotransfer method, you need:

1. Heat presses for caps or multifunctional thermopress;
2. Jet or laser color printer;
3. Thermotransfer paper;
4. Thermoscotch;
5. Cutting plotter or scissors;
6. Cap tracker for thermal transfer is black.

Printing using the thermal transfer method consists of several stages:

1. We print the prepared image on thermal transfer paper.
2. We cut out the image and fasten it to the workpiece with thermal tape.
3. We place the workpiece in the thermopressy and press the button to start the countdown.
4. After the set time has elapsed, a beep will sound. We take out the product, remove the paper and let it cool.

The process is complete. Cap tracker for thermal transfer is black is now not just a blank, but a finished product with a unique image or photo.