Cap trucker for sublimation brown (9521) - фото 1 - Blanks for sublimation
Cap trucker for sublimation brown (9521) - фото 2 - Blanks for sublimation
Cap trucker for sublimation brown (9521) - фото 3 - Blanks for sublimation
  • Cap trucker for sublimation brown (9521) - фото 1 - Blanks for sublimation
  • Cap trucker for sublimation brown (9521) - фото 2 - Blanks for sublimation
  • Cap trucker for sublimation brown (9521) - фото 3 - Blanks for sublimation
  • Cap trucker for sublimation brown (9521) - фото 1 - Blanks for sublimation
  • Cap trucker for sublimation brown (9521) - фото 2 - Blanks for sublimation
  • Cap trucker for sublimation brown (9521) - фото 3 - Blanks for sublimation

Cap trucker for sublimation brown (9521)

(0)
Color: Brown
In stock
Price:
112.00 грн
Product in cart
  • The date of shipment of the goods: 2026-11-23
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Cap trucker for sublimation brown (9521)

Sublimation trucker cap with a white front and a brown visor

 

A trucker cap for sublimation printing: the white polyester front takes a full-colour design, while the brown visor and mesh back give the cap its colour. Logos, photos or lettering are transferred on a cap heat press.

White frontpolyester for full-colour printing
56 cmhead size
Plastic snap strapadjusts the fit at the back
190 °Cstarting setting, 50 s

Is this cap right for you

 
You print with sublimation inks on sublimation paper
You have a cap heat press or a cap platen: check that the front lies evenly on the form and the heater covers the whole design
Only the white front is printed; the brown visor and mesh keep their colour
You need a coloured front for DTF or flex — there is a trucker cap with a black front

Sizes and print settings

 
up to 10 × 5.5 cmlogo on the front
up to 6 cmround emblem
1–1.5 cmfrom the visor seam to the design
Temperature
190–200 °Cstart at 190 °C
Time
45–60 sstart at 50 s, counted from closing the press
Pressure
mediumthe handle goes down with moderate resistance

These are starting settings: the exact ones depend on your press, paper, inks and room conditions — temperature and humidity.

Why this cap

 

Full colour on white

Photos, gradients and small text print without a white underbase: the front itself plays that role

Seamless front

A centred logo does not cross a seam

Design inside the fibres

Under the press the ink passes into the polyester, so there is no film on the front to crack or peel

Mesh back

The mesh back panels keep the cap light and airy in the heat

How to put a logo on the cap

 
 
Prepare the design
A logo up to 10 × 5.5 cm or a round emblem up to 6 cm; place the bottom of the design 1–1.5 cm above the visor seam. Print it mirrored with sublimation inks on sublimation paper.
 
Cut out the transfer
Leave 1–1.5 cm of paper around the design; if the paper bulges on the curve of the front, snip the top corners.
 
Heat the press
Fit the cap platen and set the starting 190 °C and 50 s. Wait until the press reaches the set temperature.
 
Put the cap on the form
Fold the sweatband out towards the visor, pull the cap over the lower form with the visor towards you and fasten it at the back: the front must sit tight, without folds.
 
Pre-press the front
Start with a 5 s pre-press without paper; allow about 10–15 s to cool before fixing the transfer.
 
Fix the transfer
Place it design side down in the centre of the front and tack it with heat tape on the margins only. Place a clean sheet of protective paper on top.
 
Key step
Press
Start at 190 °C, 50 s, medium pressure; do not touch the cap while the timer runs.
 
Peel the paper
Right after the signal, in one motion, without letting the paper fall back.
 
Cool the cap
Let the cap cool completely with the front facing up before packing; keep weight off the front panel.
Tip: Test the first cap of each batch and assess the print after cooling. If the print is pale, check the paper, inks, moisture and even contact with the front panel. After correcting the cause, adjust the starting settings on a fresh test cap within the stated ranges, changing one setting at a time; record the result.

Sublimation caps: what to choose

 
VariantSublimation printingHead sizeStrap
Trucker, brown visorYou are herefull colour on the white front56 cmplastic
Trucker, all whitefull colour on the white front56 cmplastic
Kids trucker, black visorfull colour on the white front51 cmplastic
Mesh visor, blackfull colour on the white front band56 cmplastic
Polyester five-panel cap, whitefull colour on the white front56 cmmetal

Where it works best

 
Team or event merch
Logo caps for a tournament, festival or corporate event, even in small runs
Photo gift
A cap with a photo, name or date for a particular person
Uniform and promo for a business
Caps with a café, shop or studio logo for staff and customers

What can go wrong

 
Pale colours

Cause: possible moisture, uneven contact, unsuitable materials or insufficient heating

Fix: check that the front is dry, the paper and inks are suitable, and press contact is even; after correcting the cause, adjust the settings on a fresh test cap, changing one setting at a time
A stripe below the design

Cause: the sweatband stayed under the front

Fix: fold the sweatband out towards the visor before pressing
A shadow next to the design

Cause: the paper shifted or fell back after pressing

Fix: fix the transfer with heat tape and peel the paper at once in one motion
The front turned yellow

Cause: overheating: above 200 °C or too long

Fix: lower the temperature on a fresh test cap while keeping the time unchanged; inspect the fabric and print after cooling
A blurred design or a dent in the front

Cause: pressure too light or too heavy

Fix: adjust the pressure: the handle should go down with moderate resistance

Questions and answers

 

What do I print this cap with?

Sublimation: sublimation inks, sublimation paper and a cap heat press. The ink passes into the white polyester of the front.

Why keep the design within 10 × 5.5 cm?

The cap press heater is about 8 × 15 cm, and it is its centre that presses evenly, so the logo goes in that zone.

Will a flat heat press do?

Use a curved cap platen compatible with your press. Check the cap on the form: the heater must cover the whole design and the front must lie against the form without folds.

What size is the cap?

A 56 cm head size, an adult size; for children there is the same trucker in 51 cm.

What you need

 

A press and materials for printing on the cap.

Характеристики Cap trucker for sublimation brown (9521)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product