Five-blade cap polyester black (7635) - фото 1 - Blanks for sublimation
Top sellers
Five-blade cap polyester black (7635) - фото 2 - Blanks for sublimation
Top sellers
Five-blade cap polyester black (7635) - фото 3 - Blanks for sublimation
Top sellers
  • Five-blade cap polyester black (7635) - фото 1 - Blanks for sublimation
  • Five-blade cap polyester black (7635) - фото 2 - Blanks for sublimation
  • Five-blade cap polyester black (7635) - фото 3 - Blanks for sublimation
  • Five-blade cap polyester black (7635) - фото 1 - Blanks for sublimation
  • Five-blade cap polyester black (7635) - фото 2 - Blanks for sublimation
  • Five-blade cap polyester black (7635) - фото 3 - Blanks for sublimation

Five-blade cap polyester black (7635)

(0)
Color: Black
Material:
In stock
Price:
119.00 грн
Product in cart
  • The date of shipment of the goods: 2026-11-23
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Five-blade cap polyester black (7635)

Polyester five-panel cap for DTF and flex

 

A black five-panel cap: the polyester front has no centre seam, white piping runs along the visor edge, and a fabric strap with a metal buckle sits at the back. The logo goes on it with a DTF transfer or flex on a cap heat press.

Polyester frontfor DTF and flex
Seamlessone-piece front
56 cmhead size
Metal buckleadjusts the fit at the back

Is this cap right for you

 
You apply DTF transfers or flex
You have a cap heat press or a cap platen
On coloured polyester the fabric dye can bleed into a light design under heat: choose a transfer suitable for polyester and check the settings on a test cap
You need full-colour sublimation — choose a white polyester five-panel cap

Sizes and transfer settings

 
up to 10 × 5.5 cmtrial guide; check the design against the cap and platen
1–1.5 cmfrom the visor seam to the design

Follow the chosen film's instructions for temperature, time and pressure: for coloured polyester, use a transfer suitable for polyester and fine-tune the settings on a test cap for your press and room conditions.

Why this cap

 

Seamless front

A centred logo does not cross a seam

Contrast piping

White piping along the visor edge sets off the logo

How to apply a logo

 
 
Prepare the transfer
A DTF transfer or cut flex suitable for polyester; for the initial paper fit, use up to 10 × 5.5 cm; place the bottom of the design 1–1.5 cm above the visor seam.
 
Heat the press
Fit the cap platen and use the settings in the film instructions. Wait until the press reaches the set temperature.
 
Fit the cap on the form
Fold the sweatband outwards, pull the cap onto the lower form with the visor towards you and fasten the buckle: the front must sit tight, without folds.
 
Pre-press the front
Follow the chosen film's pre-press guidance and check how the fabric responds on a test cap.
 
Place the transfer
In the centre of the front; tack the edges with heat tape if needed.
 
Key step
Press
Use the temperature, time and pressure specified in the chosen film's instructions.
 
Peel the film
Hot or after cooling — as stated for your film.
 
Cool the cap
Let the cap cool completely, front up, before packing.
Tip: Test the first cap of each batch; after cooling, check that the edges have bonded and that the fabric colour has not bled into light areas of the design. Record the settings that worked; change one setting at a time.

Caps for DTF and flex: which to choose

 
VariantFeatureHead sizeStrap
Polyester five-panel cap, blackYou are herecoloured front for DTF and flex56 cmmetal buckle
Cotton five-panel cap, blacksolid fabric56 cmmetal buckle
Trucker cap, blackcoloured front for DTF and flex56 cmplastic snap
Cotton five-panel mesh cap, blackmesh side and rear panels56 cmplastic snap

Where it works best

 
Brand or café merch
A logo cap for staff and for sale
Team and event
Caps with a logo or number for a tournament, hike or festival
Promo and giveaways
Logo caps for an exhibition, campaign or corporate event

What can go wrong

 
The fabric colour shows through the design

Cause: possible dye migration from the polyester under heat

Fix: check that the transfer is suitable for polyester and follow its application instructions; adjust the settings on a fresh test cap, changing one setting at a time
The edge of the design lifts

Cause: possible uneven contact, unsuitable settings or peel method

Fix: check contact across the whole design, the transfer's suitability for polyester and its application instructions; after correcting the cause, make a new test
A band under the design

Cause: the sweatband stayed under the front

Fix: fold the sweatband outwards before pressing
The design is crooked

Cause: the cap sat on the form at an angle

Fix: straighten the cap on the form: the centre of the front goes in the middle of the heater
A shiny mark from the heater

Cause: possible overheating or a pressure mark

Fix: check the temperature, time, pressure and surface protection against the film instructions; if overheating is confirmed, reduce one setting within the permitted range on a fresh test cap

Questions and answers

 

Can I print it with sublimation?

No: sublimation ink is transparent, so a design does not show on black fabric. For full-colour sublimation, choose a white polyester five-panel cap.

What do I apply the logo with?

A DTF transfer or flex on a cap press. DTF gives full colour and fine detail, flex gives one-colour lettering and numbers.

What design size should I choose?

As a trial guide, use up to 10 × 5.5 cm or a round emblem up to 6 cm. Check the final size on the cap fitted to the press: the whole design must sit within the area of even contact.

What size is the cap?

Head circumference 56 cm, an adult size; a metal buckle at the back adjusts the fit.

What you need

 

A press and materials for applying a logo.

Характеристики Five-blade cap polyester black (7635)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product