Visor cap unisex black (9533) - фото 1 - Blanks for sublimation
Top sellers
Visor cap unisex black (9533) - фото 2 - Blanks for sublimation
Top sellers
Visor cap unisex black (9533) - фото 3 - Blanks for sublimation
Top sellers
  • Visor cap unisex black (9533) - фото 1 - Blanks for sublimation
  • Visor cap unisex black (9533) - фото 2 - Blanks for sublimation
  • Visor cap unisex black (9533) - фото 3 - Blanks for sublimation
  • Visor cap unisex black (9533) - фото 1 - Blanks for sublimation
  • Visor cap unisex black (9533) - фото 2 - Blanks for sublimation
  • Visor cap unisex black (9533) - фото 3 - Blanks for sublimation

Visor cap unisex black (9533)

(0)
Color: Black
In stock
Price:
99.00 грн
Product in cart
  • The date of shipment of the goods: 2026-11-23
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Visor cap unisex black (9533)

One-colour visor for DTF and flex

 

A logo or lettering goes onto the front band with a DTF transfer or flex on a cap heat press.

Polyesterfor DTF and flex
Toplessopen crown
56 cmhead size
Hook-and-loop strapadjusts the fit at the back

Is this visor right for you

 
You apply DTF transfers or flex
You have a cap heat press or a cap platen compatible with your press; the heater must cover the whole design and the band must lie against the form without folds
On coloured polyester the fabric dye can bleed into a light design under heat: choose a transfer suitable for polyester and check the settings on a test visor
You need full-colour sublimation — take the white sublimation visor

Sizes and transfer settings

 
band heightlogo or lettering on the front band
1–1.5 cmfrom the peak seam to the design

Follow the chosen film's instructions for temperature, time and pressure: for coloured polyester, use a transfer suitable for polyester and fine-tune the settings on a test visor for your press and room conditions.

Why this visor

 

One colour for band and peak

The visor looks uniform, and the logo becomes the main accent

Contrast piping

White piping along the peak edge sets off the logo

How to put a logo on the visor

 
 
Prepare the transfer
A DTF transfer or cut flex suitable for polyester; hold a sheet against the front band and mark the height the design must fit; place the bottom of the design 1–1.5 cm above the peak seam.
 
Heat the press
Fit the cap platen and use the settings in the film instructions. Wait until the press reaches the set temperature.
 
Put the visor on the form
Fold the sweatband out, pull the visor over the lower form with the peak towards you and fasten the hook-and-loop strap: the band must sit tight, without folds.
 
Pre-press the band
Follow the chosen film's pre-press instructions and check how the fabric responds on a test visor.
 
Place the transfer
In the centre of the band; tack the edges with heat tape if needed.
 
Key step
Press
Use the temperature, time and pressure specified in the chosen film's instructions.
 
Peel the film
Hot or after cooling — as stated for your film.
 
Cool the visor
Let it cool completely before packing.
Tip: Test the first visor of each batch; after cooling, check that the edges have bonded and that the fabric colour has not bled into light areas of the design. Record the settings that worked; change one setting at a time.

Visors for DTF and flex: which to choose

 
VariantFeatureHead sizeStrap
Polyester visor, blackYou are hereband and peak in one colour, white piping56 cmhook-and-loop
Perforated visor, blacksmall holes across the band and peak56 cmhook-and-loop
Vintage visor, blackwashed cotton with a worn look56 cmhook-and-loop
Trucker cap, blackcoloured front for DTF and flex56 cmplastic snap

Where it works best

 
Tennis club and running
Logo visors for participants and coaches
Beach and summer events
Logo visors for outdoor promotion
Personal gift
Lettering or initials on the front band

What can go wrong

 
The fabric colour shows through the design

Cause: possible dye migration from the polyester under heat

Fix: check that the transfer is suitable for polyester and follow its application instructions; adjust the settings on a fresh test visor, changing one setting at a time
The edge of the design lifts

Cause: possible uneven contact, unsuitable settings or peel method

Fix: check contact across the whole design, the transfer's suitability for polyester and its application instructions; after correcting the cause, make a new test
A band under the design

Cause: the sweatband stayed under the front of the visor

Fix: fold the sweatband outwards before pressing
The design is crooked

Cause: the visor sat on the form at an angle

Fix: straighten the visor on the form: centre the front band under the heater
A shiny mark from the heater

Cause: possible overheating or a pressure mark

Fix: check the temperature, time, pressure and surface protection against the film instructions; if overheating is confirmed, reduce one setting within the permitted range on a fresh test visor

Questions and answers

 

Can I print it with sublimation?

No: sublimation ink is transparent, so a design does not show on the black band. For full-colour sublimation, choose the white visor.

What do I apply the logo with?

A DTF transfer or flex on a cap press. DTF gives full colour and fine detail, flex gives one-colour lettering and numbers.

What size should the design be?

Fit the design within the height of the front band. Check the final size on the visor fitted to the press: the heater must cover the whole design within the area of even contact.

What size is it?

Head circumference 56 cm; a hook-and-loop strap at the back adjusts the fit.

What you need

 

A press and materials for applying a logo.

Характеристики Visor cap unisex black (9533)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product