My Print Waterslide Varnish Free Decal Paper for Inkjet Printer Transparent (A+B) A4, 2 sheets (11829)

Name: My Print Waterslide Varnish Free Decal Paper for Inkjet Printer Transparent (A+B) A4, 2 sheets (11829)
Brand: My Print
SKU: 11829
Price: 150.00 UAH
Availability: OutOfStock

(0)

Color: Transparent

Kind:

Quantity per package:

Not available

Report availability
Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

Return guarantee
We guarantee a refund if you are not satisfied with the product
Доставка
Delivery across Ukraine to any settlement
4.9
GoogleCustomer reviews

Description My Print Waterslide Varnish Free Decal Paper for Inkjet Printer Transparent (A+B) A4, 2 sheets (11829)

Transparent waterslide decal with no varnish: an A+B trial pack

Varnish Free is a waterslide decal for inkjet printers that needs no acrylic spray varnish: the sealing is done by film B from the (A+B) kit, laminated over the print. The pack holds 2 A4 sheets with a transparent image film — just enough to test the technique on your own laminator and finish the first pieces. The transparent base is meant for light surfaces: unprinted areas stay clear and the object shows through them, so the design looks painted straight onto the mug or glass. The process is honest about equipment: a hot laminator for film B and an oven for the final bake — in return, no aerosol work and an even protective layer across the whole sheet. For longer runs the same decal comes in a 10-sheet pack.

Inkjetprint type (ink)

Transparentimage film, for light surfaces

A+Bprint sheet A + protective adhesive film B

2 sheets A4a pack to try the technique

No varnishsealing by film B, laminator at 140 °C

Film B instead of spray varnish

The design is covered by a solid film laminated at 140 °C: an even protective layer with no aerosol, no dust and no waiting between varnish coats.

A hot laminator and an oven are required — check your equipment before buying.

Is this pack right for you

You own an inkjet (ink-based) printer, plus a hot laminator and an oven

The surface is light: a white mug, clear glass, light ceramic — unprinted areas will stay transparent

You want a decal with no spray varnish: no smell, no drips, no drying of three coats

You are trying the A+B technique or making a small project — two sheets cover that

The object must survive baking at 150–160 °C — ceramic, glass and metal are fine; candles and low-melt plastic are not

White will not print — inkjet printers have no white ink, those areas turn transparent; for white elements and dark surfaces there is the white version (A+B)

Planning a run — two sheets are not enough: there is a 10-sheet pack

No laminator — there is nothing to bond film B with; take the classic transparent paper with spray varnish

You own a laser printer — this paper is made for ink; for toner there is the laser transparent paper, which needs neither varnish nor film

You need the design on fabric or skin — that is heat transfer paper or tattoo paper, not an object decal

Specifications

A4sheet format

Inkjetprint type

Transparentimage base

Varnish Freetype — sealing by film B

2 sheetsper pack

Nomirroring not needed

Parameter	Value
Format	A4 (210 × 297 mm)
Print type	Inkjet (ink)
Type	Varnish Free — no varnish: film B seals the design instead of spray
Kit	(A+B): print sheet A + protective adhesive film B
Color	Transparent image film (white in the design = transparent)
Sheets per pack	2 sheets; a 10-sheet pack covers runs
Equipment	Hot laminator (140 °C) and oven (150–160 °C)
Transfer	Warm water, 30–60 s
Fixing	Baking at 150–160 °C for 15 minutes, then full cooling
Mirroring	Not needed — print straight
Surfaces	Hard non-porous, oven-safe: ceramic, glass, metal
Care	Hand wash with a soft sponge; no dishwasher or microwave

Temperature

140 °Claminating sheet A with film B

Time

30–60 ssoaking in warm water — until the film moves freely

Temperature

150–160 °Cbaking for 15 minutes after the transfer

The sandwich after lamination: what moves onto the object

1Protective film Ba solid layer over the print — the job spray varnish does in the classic decal

2Ink layerthe design on the ink-receptive coating of sheet A

3Transparent carrier filmthe thin base: unprinted areas stay clear, so the object shows through

4Water-soluble adhesive layerdissolves in warm water and releases the film with the design

5Paper backingkeeps the sheet flat in the printer and gives up the film in water

Why this pack

No aerosol at all

Film B does the sealing via a laminator: no smell, no dust settling on fresh varnish, no pauses to dry coats

An even protective layer

The laminator presses the film with equal force across the sheet — none of the gaps or drips a spray can leave

The "painted on the object" effect

Unprinted areas stay transparent: you see the object, not a sticker

Full inkjet color

Photos, gradients, fine text — everything your inkjet printer can do moves onto the object

A baked finish

15 minutes at 150–160 °C and the film bonds firmly to the surface of the piece

A pack for a trial

Two sheets — check your design, laminator and surface before taking a pack for a run

From design to mug

Prepare the design

Print straight — do not mirror. Arrange several designs on the sheet with margins for cutting; remember: white and transparent areas will show the object's color.

Print

With an inkjet printer on the glossy (working) side of sheet A. Let the ink dry completely.

Key step

Laminate with film B

Peel the lower liner off film B and run it with sheet A through the laminator at 140 °C — this is the sealing that replaces varnish.

Remove the top PET film

After laminating, carefully peel off the top clear layer: the design stays on the sheet under the protective film.

Cut out the decal

With scissors or a plotter, leaving a small margin around the contour.

Soak

Warm water, 30–60 seconds — until the film starts moving freely on the backing.

Transfer

Hold it against the clean, degreased surface, slide the film off the backing and push out water and bubbles with a sponge, working from the center.

Bake

Oven at 150–160 °C for 15 minutes — the film bonds to the surface. Take the piece out and let it cool completely.

Tip: This is the Varnish Free (A+B) workflow specifically. The Regular decal uses spray varnish and Film Free uses mirrored laser printing: do not carry steps between types.

Next to it in the range

Variant	Printer	Print protection	Base	Pack	Who it is for
Varnish Free, transparent (A+B) — 2 sheetsYou are here	Inkjet	Film B via a laminator	Transparent	2 sheets	Light surfaces, a trial of the varnish-free technique
The same decal — 10 sheets	Inkjet	Film B via a laminator	Transparent	10 sheets	Runs on light surfaces
Varnish Free, white — 2 sheets	Inkjet	Film B via a laminator	White opaque	2 sheets	Dark surfaces and white design elements
Regular transparent — 2 sheets	Inkjet	Acrylic spray varnish	Transparent	2 sheets	For those who prefer varnish to a laminator and an oven
Laser transparent — 2 sheets	Laser	Not needed — waterproof toner	Transparent	2 sheets	For laser printer owners

Where it shines

Mugs and glasses with photos or logos

Full-color printing on the light gloss of ceramic and glass — no sticker outline around it

Glassware décor

Bottles, jars, vases: the transparent base disappears on glass, only the design remains

Light ceramic and tile

Lettering and ornaments on plates or tiles that take the oven bake with no trouble

A trial before a run

Two sheets — check the design, laminator and bake on a real piece before taking the 10-sheet pack

What can go wrong

Film B went on with wrinkles or bubbles

Cause: the laminator had not reached 140 °C or the sheet was fed at an angle

Fix: let the laminator fully heat up and feed the sheet straight, without rushing

The design smeared under the film

Cause: the ink had not dried before lamination

Fix: wait for full drying after printing — film B must cover a dry design

White details disappeared

Cause: inkjet printers do not print white — those areas stay clear on the transparent base

Fix: rework the design for the surface color or take the white version (A+B)

The decal is stiff and does not hug the object

Cause: the top PET film was not removed after lamination

Fix: peel it off before cutting: only the thin layer with the design transfers to the object

The film does not slide off the backing

Cause: the water is too cool or the soak too short

Fix: warm water and 30–60 seconds — the film should move freely, do not pull it by force

Questions and answers

What do Varnish Free and (A+B) mean?

"Varnish free": the design is sealed not by acrylic spray but by film B. (A+B) is a two-part kit: sheet A you print on, and the protective adhesive film B you laminate over it.

Do I need acrylic spray varnish?

No, that is the whole point of this type: film B, bonded by the laminator at 140 °C, plays the role of varnish. No aerosol to buy.

Which laminator will work?

A hot one with a working temperature around 140 °C. Cold lamination does not activate the adhesive layer of film B.

Do I need to mirror the design?

No. The print is straight: the decal lands on the object face up. Mirroring is for Film Free and heat transfer — those are different materials.

Can I skip the oven?

Baking at 150–160 °C for 15 minutes is the standard finish of the process: it is what bonds the film to the surface. If the object cannot be heated, the classic transparent decal with varnish is the more honest choice.

Why did white not print?

Inkjet printers have no white ink: "white" in the design becomes transparent on the clear film. For white elements and dark surfaces take the white version (A+B).

How many pieces does the pack cover?

One A4 sheet fits several designs depending on size, so two sheets are enough to master the lamination and finish the first pieces. For a run there is the 10-sheet pack.

Can I wash a piece with a decal?

By hand with a soft sponge — yes. A dishwasher, microwave or abrasives will destroy the design; place the decal in the decorative zone, not where people drink from.

Another pack, another option or an addition

If this pack does not match your equipment, surface or volume — the right one is nearby.

same decalThe 10-sheet packwhen the trial grows into a run another optionVarnish Free, white (A+B) — 2 sheetsdark surfaces and white design elements another optionThe classic waterslide decal with spray varnishthe same transparent base for those who need no laminator or oven another optionLaser transparent — 2 sheetsfor toner printers: no varnish and no film B materialInkjet printer inkso decal printing never stops categoryAll cold decal paperscompare types, colors, print technologies and packs different purposeTemporary tattoo paperskin needs a different paper: a similar mechanism, a different job

Характеристики My Print Waterslide Varnish Free Decal Paper for Inkjet Printer Transparent (A+B) A4, 2 sheets (11829)

Kind:Varnish Free
Color:Transparent
Quantity per package:2
Print type:Stream