Novelty
My Print CR Base 460-P Manual Creasing Machine (13214)
In stock
- The date of shipment of the goods: today (08.07.2026)
- Ask a question for this product
Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.
- Return guarantee
We guarantee a refund if you are not satisfied with the product
- Доставка
Delivery across Ukraine to any settlement
Description My Print CR Base 460-P Manual Creasing Machine (13214)
Manual creaser-perforator My Print CR Base 460-P — a manual creaser with perforation for shops that need two basic finishing operations in one desktop tool: a clean fold line and a controlled tear-off line.
manual
drive
460 mm
scoring length
350-360 mm
feed area
yes
perforation
Key advantages
Single and double creasing
Useful for simple folds and covers with a spine.
Perforation
For tickets, stubs, coupons and tear-off forms.
Manual control
The operator controls each sheet with no power dependency.
Compact machine
About 8 kg and a desktop footprint for small workshops.
How to use
1
Choose the operation
Decide what this run needs: single crease, double crease or perforation for controlled tear-off.
2
Set the tool
Move the required creasing or perforating element into working position and keep unused elements out of the stock.
3
Adjust the guides
Set the side guide and line position so the sheet enters squarely every time.
4
Run a test
Check one sheet: the crease should be clean without cracking; perforation should tear evenly without damaging the margin.
5
Run the batch
Feed sheets one by one and check the first 5-10 pieces until the position is stable.
6
Clean the machine
After use, remove paper dust, especially around the perforating element and the working groove.
Applications
ticketscouponstear-off formspostcardsinvitations
Tip
Before a run, test 2-3 sheets: perforation should tear easily after processing, but not rip during handling.