Main

Film for inkjet printing My Print PET waterproof, roll 0.61*30 m, transparent (10989)

Name: Film for inkjet printing My Print PET waterproof, roll 0.61*30 m, transparent (10989)
Brand: My Print
SKU: 10989
Price: 3757.00 UAH
Availability: InStock

(0)

Feature:

In stock

The date of shipment of the goods: 2026-08-10
Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

Return guarantee
We guarantee a refund if you are not satisfied with the product
Доставка
Delivery across Ukraine to any settlement
4.9
GoogleCustomer reviews

Description Film for inkjet printing My Print PET waterproof, roll 0.61*30 m, transparent (10989)

A transparent PET roll with no adhesive layer

This is transparent inkjet film with no adhesive layer on a roll of 0.61 × 30 metres. After printing you are left with a transparent web, not a self-adhesive sheet: there is no liner, nothing to peel, and it cannot attach itself to anything. The roll solves what sheets cannot: length is not limited by a format. You can print a long image or a series of images in a row and cut off exactly as much as you need. The web width is fixed at 0.61 m. In the catalogue this item carries the "Feature" value "Water-resistant".

No adhesiveclean base

0.61 × 30 mroll

Any lengthcut to the job

Water-resistantcatalogue feature

Wide formatfor roll-fed printers

Is this the right one for you

You have a wide-format or roll-fed inkjet printer that takes 61 cm and wider

You need a transparent web wider than the sheet formats in this range

You print transparent webs in runs and cut them to your own size

You make long transparent elements for a display or an exhibit and mount them separately

Your printer takes rolls but narrower than 0.61 m — the film will have to be slit lengthwise and the edge is then your responsibility

You have an ordinary sheet-fed A4 or A3 printer — take A4, 20 sheets or A3, 20 sheets

You actually need a sticker — this film has no adhesive layer; the self-adhesive items are in the rest of the category

You print on a laser — this film is made for inkjet

Specifications

PETbase material

Transparentbase

Glossysurface

0.61 × 30 mroll size

One sideworking coating

Parameter	Value
Base material	PET (polyester)
Base colour	Transparent
Surface	Glossy
Type	Ordinary — no adhesive layer and no liner
Format	Roll
Size	0.61 × 30 m
Quantity per pack	1 roll
Feature	Water-resistant
Print type	Inkjet
Working side	One, with an ink-receptive coating

What the web is made of

1Ink-receptive coatingthe working side: absorbs and holds liquid ink so that solid fills do not bead up or run

2PET basetransparent polyester: by material class this is a dimensionally stable film

3Reverse sidebare PET: no adhesive, no liner, no release film — nothing to peel

Why a roll

The format does not limit the length

An image can be longer than any sheet: you cut the web to the size instead of fitting the size to a sheet. The width stays 0.61 m.

Cutting to your own size

Several images can be laid out in a row on one web and cut apart on your own marks.

PET as the base

Polyester belongs to the dimensionally stable film family — that is a property of the material class, not a measured scale accuracy for this roll.

The "Water-resistant" feature

This is the catalogue axis on which this roll differs from the 0.61×30 m roll carrying "Not water-resistant". The roll size (0.61 × 30 m) and the quantity per pack (1 roll) are the same for both.

One working side

The coating is on one side, so the loading direction is decided once and never changes afterwards.

From file to finished web

Identify the working side before loading

The coating is on one side only. Cut a strip from the start of the roll and print a test: on the working side the ink lies evenly, on the reverse it beads up. Remember which way the roll sits.

Load the roll straight

Align the web against the printer guides.

Key step

Check the settings with a test print

Print modes differ from printer to printer and from ink to ink, so make a small test print on your own settings before a production run.

Print with a length margin

Add a few centimetres at each end: a straight cut is easier through clean film than along the edge of the image.

Let the web dry flat

Do not wind a fresh print into a tight roll: wet ink transfers onto the neighbouring wrap.

Cut it and use it

An overlay sits on the drawing. A display needs separate mounting: a frame, a pocket, magnets or double-sided tape.

Store the roll in its tube

Keep the remainder wound in the original tube or bag: excess moisture makes the film cloudy.

Tip: Check the working side and the print settings with a test print at the start of the roll rather than in the middle of a run.

This one or its neighbour in the range

The ten items in this slice are compared on three catalogue axes: format, quantity per pack and the value of the "Feature" attribute. In the catalogue each of them is recorded as transparent glossy PET for inkjet printing with no adhesive layer.

Variant	Format	Per pack	Feature	Best for
Roll 0.61×30 m, water-resistantYou are here	Roll	1 roll	Water-resistant	0.61 m wide, 30 m long
Roll 0.61×30 m, not water-resistant	Roll	1 roll	Not water-resistant	The same roll size, a different feature value
A3, 20 sheets, water-resistant	A3	20	Water-resistant	The largest sheet format in this slice
A4, 20 sheets, water-resistant	A4	20	Water-resistant	Sheets for an ordinary office printer
A3, 5 sheets, water-resistant	A3	5	Water-resistant	The same format in a pack of 5 sheets

Where this roll works best

Design office: an overlay on an A1 drawing

The 0.61 m web width takes the 594 mm short side of A1, so the overlay comes out in one piece; A0 (841 mm on the short side) has to be covered with joined strips

Wide-format copy shop: a print-on-transparent-film service

The web is cut to the size of the order instead of being picked from ready sheet formats

Display and exhibition: long transparent elements

The image hangs in glass or in a frame — the mounting is bought separately, the film has none

Production: a run of identical transparent templates in a row

Printing as a strip and cutting to marks instead of feeding sheets one by one

What goes wrong and why

Ink beads up and smudges

Cause: the print landed on the reverse side, where there is no coating

Fix: test strip from the start of the roll, then never change the loading orientation

The print transferred onto the neighbouring wrap

Cause: the roll was wound while the ink was still wet

Fix: dry the web flat and wind it only once the ink no longer transfers

The film turned cloudy before printing

Cause: the roll was stored in a damp place

Fix: keep it in its tube or a closed bag

Frequently asked questions

Does this film stick? Where is the liner?

No, this is film with no adhesive layer: there is no liner and nothing to peel. If you need an actual sticker, that is a different product type in the same category, marked in the "Type" filter with the value "Self-adhesive".

What printer do I need for the roll?

An inkjet with roll feed from 0.61 m wide. An ordinary sheet-fed printer will not take this roll — for that there are A4 sheets and A3 sheets in the same range.

Can I cut the roll into sheets?

Yes, that is normal practice: cut to your size with a sharp blade along a rule. Just bear in mind that you no longer have the factory-straight edge.

Is it suitable for screen printing?

This is conditional guidance at the level of the class of transparent media: photo emulsion is exposed with ultraviolet at 350–420 nm, and the printed black has to block it. We have not measured the optical density of this particular item. So before a production run, make a short test exposure in your own process — that is what will answer the question for your frame and your printer.

How does the water-resistant version differ from the ordinary one?

By the catalogue "Feature" value: this one is "Water-resistant", the 0.61×30 m roll is "Not water-resistant". The roll size (0.61 × 30 m) and the quantity per pack (1 roll) are the same for both. The catalogue gives no test method, so we do not describe any specific behaviour in water.

How many A4 sheets is that?

30 metres at 0.61 m wide is 18.3 m² of film. Cut into A4 in two columns across the width it gives about 280 sheets; the real yield depends on how you lay out the images.