To combine two colours of heat transfer vinyl (HTV), you can cut an opening in the gold shape for the blue insert. Each piece's adhesive then touches the fabric, with no continuous gold layer beneath the blue.
In the cut file, keep the original insert and subtract its copy from the background. This is called a knockout design: cutting away spaces for another colour. The opening size depends on the boundary you want between the colours.
What sits beneath the second colour
True layering remains an option if the manufacturer permits it for the exact films in that order. A film specified as top-layer-only cannot serve as a continuous base beneath another film. The names PU or glitter alone do not confirm compatibility; the MyPrint category helps you select materials but does not certify a layering combination. Separate pieces also need adhesive suited to the fabric and a heating sequence that both films and the fabric can withstand.
Compare three constructions. In these diagrams, a coloured strip is film, the light strip beneath it is its adhesive, and the dark base is fabric. The sections show layer order; thicknesses are schematic.
Top — visible face
True layers
For a compatible pair
Fabric
The blue piece's adhesive touches the gold film. A gold layer remains beneath the insert.
Separate, flush edges
No planned gap
Fabric
The edges match in the file. Both adhesives touch fabric; alignment accuracy determines the appearance of the boundary.
A visible fabric ring
An agreed design element
Fabric
The opening is wider than the insert. Fabric stays exposed between the films; both adhesives sit on the fabric.
Subtract the copy, keep the insert
Imagine an agreed emblem: a gold circle 60 mm in diameter, a 20 mm blue insert and a 1 mm wide ring of dark fabric around it. Both circles share a centre. This is a teaching design with an intentional gap.
1. Two original shapes
Gold circle: Ø60 mm
Blue insert: Ø20 mm
In the original artwork, the blue circle covers part of the gold circle. Showing two colours in a file does not itself create a cut-out opening.
2. Keep the original
Original Ø20 mm
Remains the blue piece
Copy Ø22 mm
For subtraction only
Copy the blue circle and enlarge only the copy to 22 mm. Align its centre with the centre of the gold circle. Exclude the saved blue original from the subtraction operation.
For a circle, increasing the diameter is enough. With a letter or complex shape, simple scaling can make the gap uneven. For a uniform gap, expand the copy's outline outward by the same distance all around. Before subtracting it, check enclosed openings and narrow details.
3. Subtract the copy from the gold circle
Gold piece: Ø60 mm
Empty opening: Ø22 mm
Blue piece: Ø20 mm
There are now two separate pieces to cut. The gold shape has a real 22 mm opening; the blue circle retains its original 20 mm diameter. Weed out the cut centre of the gold film: it does not go onto the garment.
22 mm minus 20 mm leaves 1 mm on each side
Composition on dark fabric
Outside diameter: 60 mm
Enlarged centre
Opening: 22 mm
Insert: 20 mm
(22 − 20) / 2 = 1 mm
The diameters differ by 2 mm. That difference is shared between two sides, giving a radial ring width of 1 mm.
Fabric ring: 1 mm
The dark ring is the exposed fabric itself, with no black ink or third film. The blue insert sits in the opening; there is no gold floor beneath it.
One millimetre here is a choice for explaining geometry, not a tolerance, shrinkage compensation or a production test result.
If the customer wants no dark ring
This design does not meet that request: it deliberately leaves fabric visible. For a flush fit with no gap, the opening outline in the file must match the insert outline. Heating can still change the size of the film or fabric, and misalignment can expose a gap. A continuous base beneath the second colour hides the fabric at this boundary, but brings back a layered construction.
Agree on a different appearance or choose compatible materials for the intended construction before cutting the run. An accidental gap is not an agreed separator, and an arbitrary edge overlap is not a universal fix.
Check the boundary on a finished sample
Cut the emblem at its final size and apply it to the same fabric with the same films you intend to use for repeat work. Put the sample through the full permitted heating and cooling sequence, followed by the care procedure specified for the materials.
- Compare the actual boundary with the agreed artwork: is the ring even, with no unwanted gaps or colour overlaps?
- Check whether the edges of both films remain bonded after all cycles and care.
- If the result differs from what is needed, change the construction or materials and check a new sample before repeating the work.
