In a saddle-stitched booklet, sheets are folded in half, nested inside one another and stapled through the shared fold along the spine. Each sheet makes four pages. The total page count, including the cover, must therefore be divisible by four — even if some pages are blank or have no printed number.
This rule applies to nested, folded sheets. Separate sheets fastened along an edge or held by a comb have a different construction, so this counting rule does not carry over to them.
One sheet, one fold, four pages
Each side of the flat sheet holds two future pages. The fold divides the sheet into two halves, each with an outer and an inner surface. A separate cover sheet makes this easy to see.
1. The same sheet before folding
Front of sheet · outside of cover
↓ Turn the sheet over left to right, keeping the top at the top
Back of sheet · inside of cover
Fold down the middle
↓ Bring the inner surfaces towards each other along the fold
2. The same sheet folded · view from the top edge
Free edges
One continuous sheet · fold at the bottom of the diagram
The two halves stay joined at the fold, and each has two sides: four pages in all. The sheet is shown open, with the interior sheets omitted so all four surfaces are visible. Thickness is exaggerated.
18 content pages: where do the extra two go?
Hypothetical example: a photo portfolio has 18 content pages. Those 18 exclude the cover, which uses a separate folded sheet. That adds another four pages, even if both inside cover faces stay white.
Starting count
18 + 4 = 22
22 is not divisible by 4
Add two pages for notes
18 + 2 + 4 = 24
20 interior pages + 4 cover faces
If your “18 pages” already include the cover, do not add it again. First make one list of every page, then bring the total to a multiple of four.
Keep the two new pages inside
In this version, content occupies positions 3–20, notes take 21–22, and the back cover takes 23–24. Both extra pages belong to the interior, before the back cover.
Reading order · 1 through 24
1 is the outside front; 2 the inside front; 23 the inside back; 24 the outside back. These numbers mark positions in the complete sequence: they do not have to be printed on the pages.
Software may automatically append blank pages at the end of the file. Having 24 pages alone does not prove that your intended back cover is still on the outside. Insert the required positions before its inside and outside faces, then check the final order.
Interior: 20 ÷ 4 = 5 folded sheets. Cover: 1 more sheet. Total: 6 sheets. This is the number in our mock-up, not the capacity of any stapler: binding depends on the actual paper thickness and the equipment's limits.
Reading-order PDF and print pairs
A reading-order file contains individual pages in the normal sequence 1, 2, 3…24. For printing, pages are paired so that folding puts them in their proper places. This arrangement is called imposition.
Reader pages · file 1…24
↓ Imposition changes the arrangement on the printing sheet
Print pairs · outermost sheet only
Front of sheet
Back of sheet
For a conventional left-to-right booklet: 24 | 1 on the outside, 2 | 23 on the reverse. Both sides are shown upright after turning the sheet over left to right. This shows page placement; it is not an instruction to reorder the reading PDF or select a particular duplex flip setting in the driver.
If the print service handles imposition, supply consecutive individual pages to its requirements. When the interior and cover use different stocks, ask whether two production files are needed and how to supply the four cover faces. Keep one 24-page reading-order PDF to approve the complete booklet. Different paper changes how printing is organized, but removes no pages from the count.
For a photo portfolio, explore inkjet photo paper (category in Ukrainian), which includes double-sided options. “Double-sided” describes the printable surfaces; it does not guarantee automatic duplex feeding through your printer or that the coating is suitable for folding. Check the paper requirements and try the chosen material before printing the full run.
Check the example with six sheets
Plain paper and a pencil are enough to check the order. This mock-up reveals page placement before you print any photographs.
- Take six identical sheets. Fold each in half and nest them inside one another. Mark the outermost sheet as the cover; staples are not needed for this check.
- Turn through the folded booklet as you would read it, numbering every surface from 1 to 24. Draw an arrow towards the top edge on each page, including blank ones.
- Label 3–20 as content and 21–22 as notes. Check that the cover occupies exactly 1, 2, 23 and 24, and that the centre spread is 12–13.
- Carefully remove only the outermost sheet and unfold it. Its outside should show 24 | 1. Turn it over left to right, keeping the arrows at the top, and the reverse should show 2 | 23. Put the sheet back and turn through the mock-up again.
- Compare the mock-up with the final PDF and the imposition preview: 24 positions, notes before the back cover, and the correct top and bottom. If any surface is missing or has shifted, fix the file before printing.
