07.08.2026

Independence Day Without the Rush: Six Items and the Last Order Days

Independence Day Without the Rush: Six Items and the Last Order Days

Before 24 August, companies, communities and schools order 20–100 T-shirts, badges and magnets with one design, and private buyers want a mug or matching T-shirts for the family. Plan for everything to be at the recipient's branch on Friday, 21 August: accept runs going to other cities until 14 August, and hand parcels to Nova Poshta by the 18th for remote places, by the 19th between regional centres and by the 20th within one city. Order white T-shirts in every size and badge blanks by 10 August.

Company, community, school

One design, 20–100 pieces

T-shirts by a size list, 37 mm badges and magnets. A run takes one or two working days, so accept it at least two working days before the parcel goes out.

One person

A mug or a family set

A mug with an ornament, T-shirts for adults and children with one design. Pressing takes minutes: accept until the day before the parcel goes out, and for pick-up until Thursday, 20 August.

Six items: what they are made from and on what

In the sublimation T-shirts catalogue every size and colour is a separate product card, so copy the customer's size list into the cart line by line.

White polyester T-shirt — the backbone of a run

White polyester sublimation T-shirt

Men's polyester sublimation T-shirt, white, L

Polyester 170 g/m² · sizes XS–XXXL

Sublimation needs white or light polyester fabric. The women's T-shirt has the same 170 g/m² fabric and the same sizes. Press on the HP380A NEW flat heat press: a 38 × 38 cm platen that heats up to 230 °C.

Temperature

190–200 °C

on the press display

Time

40–60 s

no longer than 60 s

Pressure

medium

for a 170 g/m² T-shirt

Pre-press

3–5 s

without the print

A typical setting for a polyester T-shirt. Press the first T-shirt of every batch as a test piece.

Order: print the design mirrored on sublimation paper and let the paper dry. Put protective paper inside the T-shirt so the ink does not go through to the back, and pre-press the T-shirt without the print. Fix the print with heat tape and press; after the signal remove the paper and let the T-shirt cool.

Pressing a white T-shirt with a blue-and-yellow ornament on a flat heat press

The print lies face down on the fabric and is taped so it cannot shift under the platen.

Kids' two-layer T-shirt — for families and schools

Kids' two-layer sublimation T-shirt

Kids' two-layer sublimation T-shirt 200 g/m², white, 128

Synthetic outside, cotton inside · 200 g/m² · sizes 110–164

A family set is one design for adults and children. The kids' two-layer T-shirt has a synthetic outer layer that suits sublimation and a cotton inner layer that is soft on the skin. It is denser — pre-press it for up to 10 s. For children's sizes make a smaller print so the design does not run onto the seams.

Cotton or black T-shirt — film instead of sublimation

White cotton T-shirt for heat transfer

Men's cotton/elastane T-shirt 170 g/m², white, L

93 % cotton, 7 % elastane · white and black XS–XXXL

Blue polyurethane heat-transfer film

My Print High Flex PU heat-transfer film, blue, 1 running metre (1 × 0.5 m)

Polyurethane, 1 × 0.5 m · 150–160 °C, 10–15 s, medium pressure · peel the carrier cold

Sublimation does not hold on cotton and does not show on black. For these T-shirts take heat-transfer film and a one-colour design: a wheat ear, a sunflower or an ornament band in blue film on a white T-shirt or in yellow on a black one. Leave multicolour ornaments to polyester and sublimation.

Mirror the layout, load the film carrier side down and cut it on a cutting plotter with a 45° blade, then weed the excess film. Place the design on the T-shirt carrier side up and press for 10–15 s at 150–160 °C with medium pressure; peel the carrier once the film has cooled. Thin ornament lines get lost in weeding just like small letters — here is how to avoid it. One running metre (1 × 0.5 m) gives 8 designs of 20 × 20 cm with 1 cm gaps, so 30 T-shirts need 4 metres of film.

37 mm badges and magnets — one machine, one insert

37 mm button badge blank with a pin

My Print mp37m 37 mm button badge blank

37 mm diameter · pin back · insert: a 48.5 mm circle

37 mm button magnet blank with a neodymium magnet

My Print mb37nd 37 mm button magnet blank (neodymium magnet)

37 mm diameter · neodymium magnet · the same 48.5 mm insert

Both badge blanks are pressed on the New Look machine with a 37 mm die, and the 48.5 mm circles are cut with the d = 37 mm punch, which you buy separately.

Order: print the inserts on paper up to 120 g/m² at 100 % scale and check the circle diameter with a ruler. Punch the circles. In the machine put the metal shell, the insert and the clear film on one side and the back on the other, then press. Already in the layout, align the community or company name with the pin. At a children's event hand out badges and magnets through adults: the badge has a sharp pin, the magnet a strong neodymium disc.

A sheet of printed badge inserts with a blue-and-yellow ornament

Inserts with the same ornament: after punching, each circle goes on either a badge or a magnet.

A mug with an ornament — a gift for one person

White 330 ml sublimation mug

Premium+ white sublimation mug, 11 oz (330 ml)

Ceramic, 330 ml, 8 cm diameter · glossy, AAA grade

For a single gift the simplest choice is a white sublimation mug with an ornament band around it, wheat ears or sunflowers. For the blue-and-yellow palette there is a mug that is blue inside with a blue handle. On a mug press set 200 °C and 180 s with the heater tight against the wall. The order is the same as for the T-shirt: mirrored print, dry paper, heat tape, and after the signal remove the paper and let the mug cool.

Offer a company that gives mugs a box of 36. On one heater a cycle takes about 5 minutes — 3 minutes of pressing and 2 of preparation, i.e. 10–12 mugs an hour. A box takes 3–4 hours.

The trident and the flag on goods: what the law says

When a customer asks for the state coat of arms or the flag, this is what the acts in force say:

  • The Law “On Advertising”, Article 8, part 1, item 6: advertising must not use or imitate the image of the State Coat of Arms of Ukraine or the State Flag of Ukraine if this promotes disrespect for them or misleads consumers. This also covers your posts with samples.
  • The Law “On Protection of Rights to Marks for Goods and Services”, Article 6: designations that depict or imitate state coats of arms and flags get no protection as a trademark, and an imitation of the small State Coat of Arms may be included in a mark only as an unprotected element and with the permission of a special commission.
  • The Criminal Code, Article 338: public desecration of the State Flag, the State Coat of Arms or the State Anthem of Ukraine is punishable.

If the layout does include the flag, make it as the Verkhovna Rada resolution “On the State Flag of Ukraine” describes it: two equal horizontal stripes, blue on top and yellow below, proportions 2 : 3.

For goods for sale the simplest route is to do without official symbols: a blue-and-yellow palette, an embroidery-style ornament, wheat ears, sunflowers. Such a layout falls under none of these restrictions.

A community run on one press

A run of one design takes one or two working days if the press handles only the T-shirts and the badges and magnets go to a separate machine.

Example: 60 T-shirts, 100 badges and 50 magnets, 37 mm

Inputs: per T-shirt about a minute of pressing at the setting above and 1–2 minutes for loading, paper and unloading (an assumption — time your first ten); on a manual badge machine 200–400 badges per 8-hour day including printing and punching.

T-shirts: a 2–3 min cycle, 20–30 an hour2–3 h
Badges and magnets, 150 pcs, with printing and punching3–6 h
One person, everything in turn5–9 h
Two people: press and machine at once3–6 h
The run takes1–2 working days

Hence the calendar rule: accept a run at least two working days before the last parcel handover.

In the last week, the press is not what slows the work down — three things do, so prepare them in advance:

  • sizes are missing — keep a stock of white T-shirts in all sizes and top up sizes for agreed runs by Wednesday, 12 August;
  • the layout is not approved — approve it and make one test T-shirt by the end of the day the run is accepted; a technical brief for corporate merch tells you what details to collect from the customer;
  • transfers are printed on the pressing day — print them the day before so the paper is dry.
A stack of folded white T-shirts with the same blue-and-yellow ornament

Stack a one-design run by size — that makes it easier to check against the list before packing.

Calendar to 24 August

The target is Friday, 21 August, not Saturday: the parcel is already at the recipient's branch. Friday is the last working day before the weekend with the Day of the State Flag (Sunday, 23 August), so a company or school can hand out T-shirts and badges before the holiday. Saturday is the reserve day in case a parcel is a day late. Since 1 August, Nova Poshta branches in regional centres have weekend hours of 8:00–19:00, while branches in shopping centres follow the centre's hours. Check the specific branch's hours in the app before collection.

DateLast day for…What to do in the workshop
Fri 7 – Mon 10 Augustthe main order of blanksShow 3–4 samples on real blanks: a T-shirt with wheat ears, a mug with an ornament, badges and magnets.
Tue 11 – Thu 13 Auguston Wednesday, the 12th, topping up sizes for agreed runsAccept runs: brief, size list, layout approval, test piece.
Fri 14 Augustruns shipped to other citiesPrint transfers and inserts for the agreed runs.
Mon 17 Augustruns for your own city and pick-up; single items to remote placesPress the T-shirts and make the badges.
Tue 18 Augusthanding over parcels to remote places (up to 3 days); single items between regional centresPacking and waybills; the waybill number goes to the customer.
Wed 19 Augusthanding over between regional centres and large cities (1–2 days); single items within the cityRuns for your own city.
Thu 20 Augusthanding over within one city (up to 1 day); orders for pick-upSingle mugs and T-shirts.
Fri 21 Augusttarget: everything at the recipient's branchHand out pick-up orders.
Sat 22 Augustreserve dayThe recipient collects a parcel that is a day late.
Sun 23 and Mon 24 AugustDay of the State Flag and Independence Day—

The figures in brackets are Nova Poshta's standard terms; the handover date is calculated from the longest term in each range. Treat a recipient outside a regional centre or large city as a remote place.

Before you give the customer a date, check the route in the delivery-time calculator on the Nova Poshta website: “From” is your city, “To” is the customer's city. If the estimate shows arrival after 21 August, hand the parcel in earlier — early enough for it to reach the branch by the 21st — and close orders for that run the same number of days earlier. After handover send the customer the waybill number and the delivery term — Nova Poshta's rules require it.

What to order by 10 August

✓White polyester T-shirts, men's and women's XS–XXXL, and kids' two-layer 110–164 — for the known runs plus a reserve for single orders.
✓Cotton T-shirts and film in blue and yellow if you take cotton orders.
✓37 mm badge and magnet blanks and the d = 37 mm punch.
✓White 330 ml mugs by the box and a few that are blue inside.
✓Sublimation paper, ink, heat tape, protective paper and paper up to 120 g/m² for the inserts.

MyPrint shows the dispatch date on every product card; add 1–3 days of Nova Poshta to it. An order dispatched on Monday, 10 August, reaches you by Thursday, the 13th, at standard terms.

Packing a holiday run: T-shirts, badges and magnets

T-shirts go into the box in stacks, badges and magnets in clear bags apart from the T-shirts: the customer can count them without unfolding the stacks.

Frequently asked questions

Can I print the trident on T-shirts for sale?

The laws named above do not ban the printing itself: they restrict advertising with the coat of arms or the flag if it promotes disrespect or misleads, registering such a trademark, and public desecration. For goods for sale a design without official symbols is simpler — ornament, wheat ears, sunflowers in the blue-and-yellow palette.

How do I make matching T-shirts for a class or team with both adults and children?

One layout in two print sizes: for adults polyester 170 g/m², XS–XXXL; for children the two-layer 200 g/m², 110–164, pre-pressed for up to 10 s. Get the size list from the customer in writing together with the layout approval.

How long does a run of 50–100 T-shirts take?

At 20–30 T-shirts an hour, 50 pieces take 1 h 40 min to 2 h 30 min of pressing and 100 pieces 3 h 20 min to 5 h; with badges, one person needs up to two days for such a run. This is the estimate from the example above: time your first ten T-shirts and recalculate.

The customer wants cotton or black T-shirts. Will sublimation work?

No, sublimation needs white or light polyester. On cotton and black make a one-colour design with polyurethane film — 150–160 °C, 10–15 s, peel the carrier cold.

Can one machine make both badges and fridge magnets?

Yes: the 37 mm badge and the 37 mm magnet take the same 48.5 mm insert and the same die. Press some of the punched circles onto pins and some onto magnets.