13.09.2026

Embroidery on terry: why water-soluble film goes on top

Embroidery on terry: why water-soluble film goes on top

Already using backing, yet terry loops still poke through the stitches? Another job needs doing above the fabric: water-soluble topping film holds down the pile and supports the upper stitches while the machine forms the embroidery. Backing underneath restrains movement and stretching of the fabric itself. Thin topping film adds to that support but does not replace it.

Let us use a monogram on stable woven terry that may be wetted under its care instructions. A towel makes a useful example: you can assess pile loops, letter outlines and fabric flatness separately.

Above: control the pile

Film holds the loops beneath the upper stitches.

Below: support the fabric

Backing helps keep the fabric base from shifting and puckering.

Three materials, two different jobs

Terry has loops above a woven base. Backing beneath the reverse supports that base but does not cover the loops. Film goes on the face of the fabric, over the pile, to provide temporary support between the pile and the upper thread during embroidery.

Where the thread passes

Topping film
Terry loops
Woven base
Backing underneath

Upper stitch

Bobbin thread

Simplified cross-section: the rust-coloured upper thread passes through the film, fabric and backing, joining the blue bobbin thread. Gaps between materials are exaggerated for explanation: in use, film rests on the pile and backing sits beneath the fabric. Thread interlocking is schematic; thicknesses are not to scale.

The fabric can therefore stay flat while the pile still interferes with the letters. There is no contradiction: the lower material is doing its job, but support above the loops is missing. Conversely, pile held down by film does not establish that the fabric is adequately stabilized underneath.

For stable woven terry, tear-away backing may be a suitable option. Select it for the particular fabric and design, checking that the base stays flat. Stretch terry, knits and fleece call for a separate choice; an unstable base may need support that remains in the item after embroidery. The name ‘terry’ alone is not enough to prescribe the same backing for every fabric.

Choosing film for the top layer

For this role, MyPrint offers My Print 35 µm water-soluble film, item 2030. Its listing explicitly specifies embroidery on pile fabrics and dissolution even in cool water. The 35 µm thickness describes this product; a sample will show whether it suits your pile and monogram.

To choose a cut length or roll format, browse the embroidery films. This section contains water-soluble and heat-removable materials: check the removal method in the individual product listing. This is a film choice; backing for the fabric is selected separately.

Two identical monograms: change only the film

Take two matching scraps of the same terry used for the towel and the same ‘MK’ monogram file. Compare areas with matching pile and fabric direction. The backing and fabric securing method should already provide a flat base. The following is a plan for a teaching trial, not MyPrint measurement results.

Sample A · without topping film

The same ‘MK’ monogram

Pile left uncovered
The same woven terry
The same backing

Sample B · with topping film

The same ‘MK’ monogram

Water-soluble film above the pile
The same woven terry
The same backing

Keep the monogram file and size, thread, needle, machine settings, backing and fabric securing method unchanged. If you change the font or backing at the same time, you can no longer attribute the difference specifically to topping film.

Compare after removing the film

Remove the film from sample B following the instructions for that particular film. The My Print 35 µm listing confirms solubility in cool water; the chosen wetting method must also be permitted for the towel itself. If its care instructions do not allow this, that removal method is unsuitable for the item. Once the residue is removed and the samples are dry, examine both under the same conditions. Treat control sample A with the same wetting and drying process so that this does not become a second difference.

Look at three things

  1. Loops: do they protrude between stitches and obscure letter strokes?
  2. Letters: is the monogram readable, with narrow details and openings preserved?
  3. Fabric: does the base lie flat around the embroidery once it is out of the hoop?

Loops and puckering suggest different checks

These signs can occur together on a finished sample. The diagrams below help you choose the next check; appearance alone does not establish a single cause.

Loops between stitches

Schematic detail: light loops among rust-coloured stitches.

If loops interfere less with the outline in B after film removal, while both samples stay flat, that supports using topping film for this combination. If nothing changes, check whether the film covered the entire embroidery and stayed in place; then assess the letters themselves.

Waves around the embroidery

Schematic profile: fabric ripples beside the embroidered area.

If the base draws in or ripples, check the backing and how the fabric was secured: did it shift, or was it stretched during hooping? Compare a new sample after one selected change. Adding topping film alone does not establish that fabric support is now sufficient.

Film is in place, but fine letters still disappear

When the fabric is flat and film covered the entire embroidery, yet individual narrow strokes remain unclear, the next change belongs in the design. Revisit stroke width, open spaces and flourishes; try a simpler monogram with more substantial strokes. Continually adding film does not widen the letter geometry.

Support can also be built into the stitch file

Underlay stitches are preliminary stitches within design elements, sewn before the visible cover stitching. They create a foundation of thread, help hold down pile and support the letter stitches. They are part of the embroidery file; backing is a separate material beneath the fabric. Ask the person preparing the file to check the underlay for your particular lettering and terry.

Start with the same monogram on two scraps. After film removal, compare pile, readability and fabric flatness, then change the element indicated by the trial: the topping film, the support beneath the fabric or the lettering file.