Thermal cup for sublimation with a metal tube yellow 70 ml (10585) - фото 1 - Blanks for sublimation
Thermal cup for sublimation with a metal tube yellow 70 ml (10585) - фото 2 - Blanks for sublimation
Thermal cup for sublimation with a metal tube yellow 70 ml (10585) - фото 3 - Blanks for sublimation
Thermal cup for sublimation with a metal tube yellow 70 ml (10585) - фото 4 - Blanks for sublimation
Thermal cup for sublimation with a metal tube yellow 70 ml (10585) - фото 5 - Blanks for sublimation
  • Thermal cup for sublimation with a metal tube yellow 70 ml (10585) - фото 1 - Blanks for sublimation
  • Thermal cup for sublimation with a metal tube yellow 70 ml (10585) - фото 2 - Blanks for sublimation
  • Thermal cup for sublimation with a metal tube yellow 70 ml (10585) - фото 3 - Blanks for sublimation
  • Thermal cup for sublimation with a metal tube yellow 70 ml (10585) - фото 4 - Blanks for sublimation
  • Thermal cup for sublimation with a metal tube yellow 70 ml (10585) - фото 5 - Blanks for sublimation
  • Thermal cup for sublimation with a metal tube yellow 70 ml (10585) - фото 1 - Blanks for sublimation
  • Thermal cup for sublimation with a metal tube yellow 70 ml (10585) - фото 2 - Blanks for sublimation
  • Thermal cup for sublimation with a metal tube yellow 70 ml (10585) - фото 3 - Blanks for sublimation
  • Thermal cup for sublimation with a metal tube yellow 70 ml (10585) - фото 4 - Blanks for sublimation
  • Thermal cup for sublimation with a metal tube yellow 70 ml (10585) - фото 5 - Blanks for sublimation

Thermal cup for sublimation with a metal tube yellow 70 ml (10585)

(0)
Color: Yellow
In stock
Price:
154.00 грн
Product in cart
  • The date of shipment of the goods: 2026-11-23
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Thermal cup for sublimation with a metal tube yellow 70 ml (10585)

A yellow 70 ml mini tumbler for a dark, saturated design

 

A 70 ml mini metal tumbler with a step in the middle: a yellow coating, a clear lid and a bent metal straw. The sublimation coating is on the outside of the body. Sublimation ink is transparent: the body colour shows through the design, and the tumbler colour stays in place of any white. Dark, saturated lettering and logos look best. The heaters in MyPrint's table are made for bodies from 6 cm, so this tumbler is printed in a sublimation oven with shrink film, or in a press with the 3 oz tumbler heating element once its contact has been checked. MyPrint's oven start for steel tumblers is 180 °C for 4–5 minutes; for this piece, confirm it on a test item.

70 mlvolume
Yellowcoating for dark designs
180 °Coven start, 4–5 min
Ovenwith shrink film

Is this mini tumbler right for you

 
You have a sublimation oven whose chamber fits the piece with its paper and film
You have shrink film sized to the body
You print with sublimation ink on sublimation paper
Or a press with the 3 oz tumbler heating element, once its contact with the body is checked
You need a coloured tumbler for a dark, saturated logo or lettering
Your heater does not match the diameter and profile of the design area or make close contact across its full height — use a trial oven transfer with shrink film

Size and print settings

 
Ø 5 cmbody diameter
Stepthe base is narrower than the top
Strawbent, metal
Temperature
180 °Coven start with shrink film
Time
4–5 minin a preheated oven

This is MyPrint's oven start for steel tumblers in the HO-16; according to MyPrint, makers cite a 180–200 °C, 4–7 minute window. For this piece, confirm the settings on a test item and tune them to your oven, paper, ink, film and room conditions — temperature and humidity.

Why this tumbler

 

Mini size

70 ml with a straw — for shots, tastings or children's portions

Colour without printing

The body stands out even with a simple logo

From file to finished tumbler

 
 
Prepare the layout
Keep key elements on the wide upper part: designs distort on the step.
 
Print mirrored
With sublimation ink on sublimation paper.
 
Remove the lid and straw
Only the metal body goes into the oven.
 
Fix the paper
Tightly around the body, with an overlap at the seam, and secure it with heat-resistant tape.
 
Fit the film
Shrink film sized to the body; check that the piece with its film fits inside the oven chamber.
 
Key step
Bake
Starting point — 180 °C for 4–5 minutes in a preheated oven.
 
Remove the film and paper
Immediately after transfer, wearing heat-resistant gloves.
 
Put the lid and straw back
Once the body has cooled completely.
Tip: Make the first piece from each new box a test piece. If it is pale, add a minute on the next trial within the window; if the design blurs, shorten the time. Change one setting at a time.

Oven-printed piece: which to choose

 
VariantShapeVolume and colourDesign and use
Mini tumbler, whiteMini tumblerwhite, 70 mlPhotos and full-colour layouts
Mini tumbler, silverMini tumblersilver, 70 mlA logo on metal
Mini tumbler, pinkMini tumblerpink, 70 mlA dark logo on colour
Mini tumbler, light blueMini tumblerlight blue, 70 mlA dark logo on colour
Mini tumbler, turquoiseMini tumblerturquoise, 70 mlA dark logo on colour
Mini tumbler, yellowYou are hereMini tumbleryellow, 70 mlA dark logo on colour

Where it works best

 
Parties and holidays
Mini tumblers with guests' names
Event souvenirs
A logo on a miniature tumbler
Bars and tastings
Branded mini tumblers for shots

What can go wrong

 
Pale patches

Cause: the paper is not in contact: the film is too large or shrank unevenly

Fix: use film sized to the body and fix the paper more tightly
The design distorted on a curve

Cause: key elements landed on a shaped area

Fix: move them to the flattest part of the body
White parts of the design disappeared

Cause: sublimation ink is transparent and has no white

Fix: the body colour stays in place of white: do not plan white into the design
The design blurred

Cause: overheating

Fix: shorten the time on the next trial
Pale all over

Cause: underheating

Fix: add a minute on the next trial within the window
A shadow or a double image

Cause: the paper shifted under the film

Fix: fix the paper with heat-resistant tape along its edges

Questions and answers

 

What are the print settings for this piece?

MyPrint's oven start for steel tumblers is 180 °C for 4–5 minutes in a preheated oven with shrink film; according to MyPrint, makers cite a 180–200 °C, 4–7 minute window. For this piece, confirm the settings on a test item: if it is pale, add a minute; if the design blurs, shorten the time.

Can I print it in a press?

The heaters in MyPrint's table are made for bodies from 6 cm, so they do not suit this Ø 5 cm tumbler. There is a 3 oz tumbler heating element: check that it suits your press and makes close contact with the body — it may not reach the step and the narrower base, so keep the design above the step. Before heating, remove the lid and straw. MyPrint's press starting settings for tumblers are 180 °C, 80 seconds and medium pressure; confirm them on a test mini tumbler. Tune the values to your press, heater, paper, ink and room conditions, including temperature and humidity. If the print is pale, first check warm-up and contact, then add a few seconds on the next trial; if the design blurs, shorten the time. Change one setting at a time.

Which film should I use?

Shrink film sized to the body: once it shrinks it must press the paper firmly against the body. Before baking, check that the piece with its film fits inside the oven chamber.

Can white be printed?

No: sublimation ink is transparent, so white in the design is the body colour. For white elements take a white tumbler.

How should a printed piece be washed?

By hand, with a soft sponge, without abrasives. Never in a microwave: it is metal.

What you need for printing

 

Equipment and materials for your chosen sublimation printing method.

Характеристики Thermal cup for sublimation with a metal tube yellow 70 ml (10585)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product