Thermal mug for sublimation metal (steel 304) silver (350 ml) (7268) - фото 1 - Blanks for sublimation
Thermal mug for sublimation metal (steel 304) silver (350 ml) (7268) - фото 2 - Blanks for sublimation
  • Thermal mug for sublimation metal (steel 304) silver (350 ml) (7268) - фото 1 - Blanks for sublimation
  • Thermal mug for sublimation metal (steel 304) silver (350 ml) (7268) - фото 2 - Blanks for sublimation
  • Thermal mug for sublimation metal (steel 304) silver (350 ml) (7268) - фото 1 - Blanks for sublimation
  • Thermal mug for sublimation metal (steel 304) silver (350 ml) (7268) - фото 2 - Blanks for sublimation

Thermal mug for sublimation metal (steel 304) silver (350 ml) (7268)

(0)
Color:
In stock
Price:
285.00 грн
Product in cart
  • The date of shipment of the goods: 2026-11-23
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Thermal mug for sublimation metal (steel 304) silver (350 ml) (7268)

A silver rounded tumbler for a logo on metal

 

A 350 ml rounded steel tumbler that narrows towards the base: a silver steel body, a clear lid with a slider. The double steel wall keeps drinks at temperature, and the sublimation coating is only on the outer wall. Sublimation ink is transparent, so the silver metal stays in place of any white in the design — the choice for logos and lettering. A cylindrical heater for straight bodies cannot wrap the rounded base closely, so it is printed in a sublimation oven with shrink film. MyPrint's oven start for steel tumblers is 180 °C for 4–5 minutes; for this piece, confirm it on a test item.

350 mlvolume
Silvermetal for a logo
180 °Coven start, 4–5 min
Ovenwith shrink film

Is this tumbler right for you

 
You have a sublimation oven whose chamber fits the piece with its paper and film
You have shrink film sized to the body
You print with sublimation ink on sublimation paper
You need a logo or lettering that sits on metal
Your heater does not match the diameter and profile of the design area or make close contact across its full height — use a trial oven transfer with shrink film

Size and print settings

 
Ø 7.7 cmbody diameter
Rounded basedesigns distort on the curve
Double wallsteel
Temperature
180 °Coven start with shrink film
Time
4–5 minin a preheated oven

This is MyPrint's oven start for steel tumblers in the HO-16; according to MyPrint, makers cite a 180–200 °C, 4–7 minute window. For this piece, confirm the settings on a test item and tune them to your oven, paper, ink, film and room conditions — temperature and humidity.

Why this tumbler

 

A slider lid

You can drink without removing the lid

Metal under the logo

Unprinted areas stay silver

From file to finished tumbler

 
 
Prepare the layout
Keep key elements in the upper, flattest part: designs distort on the curve.
 
Print mirrored
With sublimation ink on sublimation paper.
 
Remove the lid
Only the steel body goes into the oven.
 
Fix the paper
Tightly around the body, with an overlap at the seam, and secure it with heat-resistant tape.
 
Fit the film
Shrink film sized to the body; check that the piece with its film fits inside the oven chamber.
 
Key step
Bake
Starting point — 180 °C for 4–5 minutes in a preheated oven.
 
Remove the film and paper
Immediately after transfer, wearing heat-resistant gloves.
 
Put the lid back
Once the body has cooled completely.
Tip: Make the first piece from each new box a test piece. If it is pale, add a minute on the next trial within the window; if the design blurs, shorten the time. Change one setting at a time.

Oven-printed piece: which to choose

 
VariantShapeVolume and colourDesign and use
Rounded tumbler, silverYou are hereRounded tumblersilver, 350 mlA logo on metal
Rounded tumbler, whiteRounded tumblerwhite, 350 mlPhotos and full-colour layouts
Contoured bottle, silverContoured bottlesilver, 500 mlA logo on metal

Where it works best

 
A coffee gift
A photo or lettering on a rounded tumbler
Corporate merch
A logo on a lidded tumbler
Cafés
A tumbler with the logo for guests

What can go wrong

 
Pale patches

Cause: the paper is not in contact: the film is too large or shrank unevenly

Fix: use film sized to the body and fix the paper more tightly
The design distorted on a curve

Cause: key elements landed on a shaped area

Fix: move them to the flattest part of the body
The design blurred

Cause: overheating

Fix: shorten the time on the next trial
Pale all over

Cause: underheating

Fix: add a minute on the next trial within the window
A shadow or a double image

Cause: the paper shifted under the film

Fix: fix the paper with heat-resistant tape along its edges

Questions and answers

 

What are the print settings for this piece?

MyPrint's oven start for steel tumblers is 180 °C for 4–5 minutes in a preheated oven with shrink film; according to MyPrint, makers cite a 180–200 °C, 4–7 minute window. For this piece, confirm the settings on a test item: if it is pale, add a minute; if the design blurs, shorten the time.

Can I print it in a press?

A cylindrical heater is made for a straight body: it cannot wrap the rounded base closely, so the design comes out patchy there. Consider press printing only on an area whose diameter and profile have been checked against a compatible heater, with close contact across the full design height. For curved areas, use a trial oven transfer with shrink film; restrict the design to coated areas where the paper is pressed evenly against the surface, and confirm the result on a sample.

Which film should I use?

Shrink film sized to the body: once it shrinks it must press the paper firmly against the body. Before baking, check that the piece with its film fits inside the oven chamber.

White or silver — which to choose?

For a logo on metal, silver: white areas of the design stay metal. For photos and full-colour layouts, white.

How should a printed piece be washed?

By hand, with a soft sponge, without abrasives. Never in a microwave: it is metal.

What you need for printing

 

Equipment and materials for oven printing.

Характеристики Thermal mug for sublimation metal (steel 304) silver (350 ml) (7268)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product