Thermos for sublimation metal (steel 304) with a white filter mesh (350 ml) (8369) - фото 1 - Blanks for sublimation
Thermos for sublimation metal (steel 304) with a white filter mesh (350 ml) (8369) - фото 2 - Blanks for sublimation
  • Thermos for sublimation metal (steel 304) with a white filter mesh (350 ml) (8369) - фото 1 - Blanks for sublimation
  • Thermos for sublimation metal (steel 304) with a white filter mesh (350 ml) (8369) - фото 2 - Blanks for sublimation
  • Thermos for sublimation metal (steel 304) with a white filter mesh (350 ml) (8369) - фото 1 - Blanks for sublimation
  • Thermos for sublimation metal (steel 304) with a white filter mesh (350 ml) (8369) - фото 2 - Blanks for sublimation

Thermos for sublimation metal (steel 304) with a white filter mesh (350 ml) (8369)

(0)
Volume:
In stock
Price:
260.00 грн
Product in cart
  • The date of shipment of the goods: 2026-11-23
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Thermos for sublimation metal (steel 304) with a white filter mesh (350 ml) (8369)

A white thermos with a tea strainer for photos and full-colour print

 

A 350 ml steel thermos with a straight body and a white coating for print: a white lid and a mesh strainer inside. The double steel wall keeps drinks at temperature, and the sublimation coating is only on the outer wall. The white surface provides a background for photos, full-colour designs and text. The Ø 6.5 cm body is printed in a 6–7 or 6.5–7.5 cm tumbler heater: a standard 11 oz heater is made for 7.5–9 cm and will not wrap this body closely. As a start, use MyPrint's settings for steel tumblers — 180 °C, 80 seconds, medium pressure — and confirm them on a test thermos.

350 mlvolume
Mesh strainerinside
180 °Cstart, 80 s
White coatingfor full-colour print

Is this thermos right for you

 
Your tumbler heater fits the Ø 6.5 cm body, makes close contact and covers the full design height
You print with sublimation ink on sublimation paper
You print photos, full-colour layouts or logos on a white background
For a temperature display on the lid, see the white thermos with a display, 350 ml
For another volume, see the white thermos with a strainer, 500 ml
You only print in a standard 11 oz heater for 7.5–9 cm — it will not wrap the Ø 6.5 cm body closely

Size and print settings

 
Ø 6.5 cmstraight body
≈ 20.4 cmapproximate body circumference
Double wallsteel
Temperature
180 °Cstart for a steel thermos in a press
Time
80 sfrom closing the preheated press
Pressure
mediumthe handle closes easily and the thermos does not turn

These are MyPrint's starting settings for steel tumblers in a heater that wraps the body all round; for the thermos, confirm them on a test piece. Tune the exact values to your press, paper, ink and room conditions — temperature and humidity.

Why this thermos

 

A mesh strainer

Tea or a herbal blend can be brewed right in the thermos

A white background for photos

Photos, full-colour designs and text sit on a white background; check the colours on a test thermos

From file to finished thermos

 
 
Prepare the layout
Measure the height of the straight body and its circumference; add a paper overlap at the seam.
 
Print mirrored
With sublimation ink on sublimation paper.
 
Remove the lid
Remove the lid and take out the strainer: only the steel body goes into the heater.
 
Fix the paper
Tightly all round, with an overlap at the seam, and secure it with heat-resistant tape along the edges and the seam.
 
Key step
Press
Starting settings — 180 °C, 80 seconds, medium pressure in a tumbler heater.
 
Remove the paper
Right after the signal, wearing heat-resistant gloves.
 
Reassemble
Once the body has cooled completely, put the strainer and the lid back in place.
Tip: Make the first thermos from each new box a test piece. If the design blurs or the white turns brown, give the next one 15 s less; if it is pale everywhere, check the press warm-up and paper contact, then add 10–15 s. Change one setting at a time.

White Ø 6.5 cm thermos: which to choose

 
VariantFeaturesVolumeDesign and use
With a display, 350 mlDisplay lid and strainer350 mlA gift that shows the tea's temperature
With a display, 500 mlDisplay lid and strainer500 mlA gift that shows the tea's temperature
With a strainer, 350 mlYou are hereMesh strainer350 mlTea on the go with a photo or logo
With a strainer, 500 mlMesh strainer500 mlTea on the go with a photo or logo

Where it works best

 
A gift for a colleague or a teacher
A photo or lettering on a tea thermos
Corporate gifts
A logo and branded layout on a white background
Tea shops and cafés
Merch for tea lovers

What can go wrong

 
A pale band on one side or a pale edge

Cause: the paper or heater does not make contact, or heating is uneven

Fix: check paper and heater contact and the press warm-up; a gap cannot be fixed with more time
The design blurred or the white turned brown

Cause: overheating

Fix: give the next thermos 15 s less
Pale all over

Cause: underheating or weak paper contact

Fix: check the press warm-up and paper contact, then add 10–15 s on the next one
A line at the seam

Cause: the paper parted at the seam

Fix: leave an overlap and tape the seam along its length

Questions and answers

 

What are the print settings for this thermos?

As a start, use MyPrint's settings for steel tumblers — 180 °C, 80 seconds, medium pressure, in a heater that wraps the body all round. If the design blurs, give the next one 15 s less; if it is pale everywhere, check the warm-up and paper contact, then add 10–15 s. The exact values depend on the press, paper, ink and room conditions, so make the first thermos from a new box a test piece.

Will an ordinary mug press do?

A standard 11 oz heater is made for a 7.5–9 cm diameter, so it will not wrap the Ø 6.5 cm body closely. You need a tumbler heater: the 22 × 19.5 cm one for 6–7 cm or the 22 × 21.5 cm one for 6.5–7.5 cm, or the MP160 tumbler press, which comes with a 6.5–7.5 cm heater. Ask the manager whether a heater fits your press before buying it, and before the first print check that it makes close contact with the body and covers the full design height.

What do I do with the lid and the strainer when printing?

Remove the lid and take out the strainer: only the steel body goes into the heater. Put them back once the body has cooled.

Can I print in a sublimation oven?

Yes, after checking the dimensions: remove the lid and the strainer, wrap only the steel body in paper and fit shrink film sized to the body. Check that the body with its paper and film fits inside the HO-16 oven, then preheat the oven. MyPrint's starting point for steel tumblers is 180 °C for 4–5 minutes; for the thermos, confirm it on a test piece. Tune the exact values to the oven, paper, ink, film and room conditions, including temperature and humidity; change one setting at a time. Remove the film and paper immediately after transfer, wearing heat-resistant gloves.

How should a printed thermos be washed?

By hand, with a soft sponge, without abrasives. Never in a microwave: it is metal.

What you need for printing

 

Equipment and materials for your chosen sublimation printing method.

Характеристики Thermos for sublimation metal (steel 304) with a white filter mesh (350 ml) (8369)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product