Thermos for sublimation metallic white (350 ml) (6069) - фото 1 - Blanks for sublimation
Thermos for sublimation metallic white (350 ml) (6069) - фото 2 - Blanks for sublimation
Thermos for sublimation metallic white (350 ml) (6069) - фото 3 - Blanks for sublimation
Thermos for sublimation metallic white (350 ml) (6069) - фото 4 - Blanks for sublimation
Thermos for sublimation metallic white (350 ml) (6069) - фото 5 - Blanks for sublimation
  • Thermos for sublimation metallic white (350 ml) (6069) - фото 1 - Blanks for sublimation
  • Thermos for sublimation metallic white (350 ml) (6069) - фото 2 - Blanks for sublimation
  • Thermos for sublimation metallic white (350 ml) (6069) - фото 3 - Blanks for sublimation
  • Thermos for sublimation metallic white (350 ml) (6069) - фото 4 - Blanks for sublimation
  • Thermos for sublimation metallic white (350 ml) (6069) - фото 5 - Blanks for sublimation
  • Thermos for sublimation metallic white (350 ml) (6069) - фото 1 - Blanks for sublimation
  • Thermos for sublimation metallic white (350 ml) (6069) - фото 2 - Blanks for sublimation
  • Thermos for sublimation metallic white (350 ml) (6069) - фото 3 - Blanks for sublimation
  • Thermos for sublimation metallic white (350 ml) (6069) - фото 4 - Blanks for sublimation
  • Thermos for sublimation metallic white (350 ml) (6069) - фото 5 - Blanks for sublimation

Thermos for sublimation metallic white (350 ml) (6069)

(0)
In stock
Price:
275.00 грн
Product in cart
  • The date of shipment of the goods: 2026-11-23
  • Buy a box50 штук - 13750 грн
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Thermos for sublimation metallic white (350 ml) (6069)

A white thermos with a cord for photos and full-colour print

 

A 350 ml steel thermos: a white coating for print and a domed cap with a carry cord. The body is straight; it is printed below the steel band. The double steel wall keeps drinks at temperature, and the sublimation coating is only on the outer wall. The white surface provides a background for photos, full-colour designs and text, and unprinted areas stay white. The heater is chosen by the body diameter: measure it before buying a heater. As a start, use MyPrint's settings for steel tumblers — 180 °C, 80 seconds, medium pressure — and confirm them on a test thermos.

350 mlvolume
Whitecoating for full-colour print
180 °Cstart, 80 s
Cordon the cap

Is this thermos right for you

 
Your heater is chosen by the measured body diameter, makes close contact and covers the full design height
You print with sublimation ink on sublimation paper
You print photos, full-colour layouts or logos on a white background
Compare these alternatives: the white 500 ml thermos with a cord and the white 350 ml thermos with a cup
The design has to run onto the steel band or the lid — only the straight body is printed

Size and print settings

 
Straight bodyprint zone below the band
Double wallsteel
Diametermeasure it before choosing a heater
Temperature
180 °Cstart for a steel piece in a press
Time
80 sfrom closing the preheated press
Pressure
mediumthe handle closes easily and the piece does not turn

These are MyPrint's starting settings for steel tumblers in a heater that wraps the body all round; for this piece, confirm them on a test item. Tune the exact values to your press, paper, ink and room conditions — temperature and humidity.

Why this thermos

 

A cord on the cap

Easy to carry by hand

A white background for photos

Photos, full-colour designs and text sit on a white background; check the colours on a test piece

From file to finished thermos

 
 
Prepare the layout
Measure the height of the straight body, its circumference and diameter; add a paper overlap at the seam.
 
Print mirrored
With sublimation ink on sublimation paper.
 
Remove the cap with its cord
Only the steel body goes into the heater.
 
Fix the paper
Tightly all round on the straight part, with an overlap at the seam, and secure it with heat-resistant tape along the edges and the seam.
 
Key step
Press
Starting settings — 180 °C, 80 seconds, medium pressure in a heater for your diameter.
 
Remove the paper
Right after the signal, wearing heat-resistant gloves.
 
Put the cap with its cord back
Once the body has cooled completely.
Tip: Make the first piece from each new box a test piece. If the design blurs or the white turns brown, give the next one 15 s less; if it is pale everywhere, check the press warm-up and paper contact, then add 10–15 s. Change one setting at a time.

Which thermos to choose

 
VariantTypeVolume and colourDesign and use
Thermos with a cord, 350 mlYou are hereThermos, cord on the capwhite, 350 mlPhotos and full-colour layouts
Thermos with a cord, 500 mlThermos, cord on the capwhite, 500 mlPhotos and full-colour layouts
Thermos with a cup, 350 mlThermos, cup on topwhite, 350 mlPhotos and full-colour layouts
Thermos with a cup, 500 mlThermos, cup on topwhite, 500 mlPhotos and full-colour layouts

Where it works best

 
A gift for an angler or a traveller
A photo or lettering on a thermos for the road
Corporate gifts
A logo and branded layout on a white background
Hiking clubs
A thermos with an emblem for hikes

What can go wrong

 
A pale band on one side or a pale edge

Cause: the paper or heater does not make contact, or heating is uneven

Fix: check paper and heater contact and the press warm-up; a gap cannot be fixed with more time
A pale band at the edge of the print zone

Cause: the design ran past the straight part

Fix: keep the design within the straight part of the body
The design blurred or the white turned brown

Cause: overheating

Fix: give the next piece 15 s less
Pale all over

Cause: underheating or weak paper contact

Fix: check the press warm-up and paper contact, then add 10–15 s on the next one
A line at the seam

Cause: the paper parted at the seam

Fix: leave an overlap and tape the seam along its length

Questions and answers

 

What are the print settings for this piece?

As a start, use MyPrint's settings for steel tumblers — 180 °C, 80 seconds, medium pressure, in a heater that wraps the body all round. If the design blurs, give the next one 15 s less; if it is pale everywhere, check the warm-up and paper contact, then add 10–15 s. The exact values depend on the press, paper, ink and room conditions, so make the first piece from a new box a test piece.

Which heater does it need?

Measure the body diameter and choose the heater by it: for 6–7 cm, the 22 × 19.5 cm heater; for 6.5–7.5 cm, the 22 × 21.5 cm heater or the MP160 press; for 7.5–9 cm, the standard 11 oz heater or the 30 oz heater in the MP170 press. Ask the manager whether a heater fits your press before buying it, and before the first print check that it makes close contact with the body and covers the full design height.

What do I do with the cap when printing?

Remove the cap with its cord: only the steel body goes into the heater. Put it back once the body has cooled completely.

Can I print in a sublimation oven?

Yes, after checking the dimensions: remove the lid, wrap only the steel body in paper and fit shrink film sized to the body. Check that the body with its paper and film fits inside the HO-16 oven, then preheat the oven. MyPrint's starting point for steel tumblers is 180 °C for 4–5 minutes; confirm it on a test piece. Tune the exact values to the oven, paper, ink, film and room conditions, including temperature and humidity; change one setting at a time. Remove the film and paper immediately after transfer, wearing heat-resistant gloves.

How should a printed piece be washed?

By hand, with a soft sponge, without abrasives. Never in a microwave: it is metal.

What you need for printing

 

Equipment and materials for your chosen sublimation printing method.

Характеристики Thermos for sublimation metallic white (350 ml) (6069)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product