Thermos for sublimation metallic white (1000 ml) (7056) - фото 1 - Blanks for sublimation
Thermos for sublimation metallic white (1000 ml) (7056) - фото 2 - Blanks for sublimation
Thermos for sublimation metallic white (1000 ml) (7056) - фото 3 - Blanks for sublimation
Thermos for sublimation metallic white (1000 ml) (7056) - фото 4 - Blanks for sublimation
Thermos for sublimation metallic white (1000 ml) (7056) - фото 5 - Blanks for sublimation
  • Thermos for sublimation metallic white (1000 ml) (7056) - фото 1 - Blanks for sublimation
  • Thermos for sublimation metallic white (1000 ml) (7056) - фото 2 - Blanks for sublimation
  • Thermos for sublimation metallic white (1000 ml) (7056) - фото 3 - Blanks for sublimation
  • Thermos for sublimation metallic white (1000 ml) (7056) - фото 4 - Blanks for sublimation
  • Thermos for sublimation metallic white (1000 ml) (7056) - фото 5 - Blanks for sublimation
  • Thermos for sublimation metallic white (1000 ml) (7056) - фото 1 - Blanks for sublimation
  • Thermos for sublimation metallic white (1000 ml) (7056) - фото 2 - Blanks for sublimation
  • Thermos for sublimation metallic white (1000 ml) (7056) - фото 3 - Blanks for sublimation
  • Thermos for sublimation metallic white (1000 ml) (7056) - фото 4 - Blanks for sublimation
  • Thermos for sublimation metallic white (1000 ml) (7056) - фото 5 - Blanks for sublimation

Thermos for sublimation metallic white (1000 ml) (7056)

(0)
In stock
Price:
554.00 грн
Product in cart
  • The date of shipment of the goods: 2026-11-23
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Thermos for sublimation metallic white (1000 ml) (7056)

A white 1 litre thermos for photos and full-colour print

 

A 1000 ml metal thermos: a white coating for print, a cup on top and a stopper with a valve under it. Two black rings hold a carry handle around the body. The upper ring with the handle does not come off, so the white body below it is printed and the rings stay out of the heater. The white surface provides a background for photos, full-colour designs and text, and unprinted areas stay white. For the Ø 9.3 cm body, consider a mug heater rated for diameters of 8–9.5 cm; check that it fits between the rings, makes close contact across the print area and leaves the handle outside. As a start, use MyPrint's settings for steel tumblers — 180 °C, 80 seconds, medium pressure — and confirm them on a test thermos.

1000 mlvolume
Whitecoating for full-colour print
180 °Cstart, 80 s
Cupon top, with a valve stopper under it

Is this thermos right for you

 
Your heater fits the Ø 9.3 cm body, makes close contact between the rings, covers the full design height and leaves the handle outside
You print with sublimation ink on sublimation paper
You print photos, full-colour layouts or logos on a white background
For a smaller volume, see the white 500 ml thermos with a cup and the white 350 ml thermos with a cup
The design has to run under the rings or onto the cup — only the white body between the rings is printed

Size and print settings

 
Ø 9.3 cmbody for printing
≈ 29.2 cmapproximate body circumference
Between the ringsprint area on the body
Temperature
180 °Cstarting point for a metal piece in a press
Time
80 sfrom closing the preheated press
Pressure
mediumthe handle closes easily and the piece does not turn

These are MyPrint's starting settings for steel tumblers in a heater that wraps the body all round; for this thermos, confirm them on a test piece. Tune the exact values to your press, paper, ink and room conditions — temperature and humidity.

Why this thermos

 

A litre of drink

Enough tea or coffee for several people on the road

A carry handle

Held by two rings, so the thermos is easy to carry in one hand

A white background for photos

Photos, full-colour designs and text sit on a white background; check the colours on a test piece

From file to finished thermos

 
 
Prepare the layout
Measure the height of the white body between the rings and its circumference; check the design size against your heater's working area.
 
Print mirrored
With sublimation ink on sublimation paper.
 
Remove the cup and stopper
The rings with the handle stay in place; only the white body goes into the heater.
 
Fix the paper
Tightly all round on the body between the rings, with an overlap at the seam, and secure it with heat-resistant tape along the edges and the seam.
 
Key step
Press
Starting settings — 180 °C, 80 seconds, medium pressure; the heater sits below the upper ring and the rings stay out of it.
 
Remove the paper
Right after the signal, wearing heat-resistant gloves.
 
Put the cup and stopper back
Once the body has cooled completely.
Tip: Make the first thermos from each new box a test piece. If the design blurs or the white turns brown, give the next one 15 s less; if it is pale everywhere, check the press warm-up and paper contact, then add 10–15 s. Change one setting at a time.

Which thermos to choose

 
VariantTypeVolume and colourDesign and use
Thermos with a handle, 1000 mlYou are hereThermos, cup on top and a handlewhite, 1000 mlPhotos and full-colour layouts
Thermos with a cup, 500 mlThermos, cup on topwhite, 500 mlPhotos and full-colour layouts
Thermos with a cup, 350 mlThermos, cup on topwhite, 350 mlPhotos and full-colour layouts
Thermos with a cord, 500 mlThermos, cord on the capwhite, 500 mlPhotos and full-colour layouts

Where it works best

 
Hikes and fishing
A 1 litre thermos with a photo or lettering for the whole group
Corporate gifts
A logo and branded layout on a white background
A gift for a traveller
A name or photo on a big thermos for the road

What can go wrong

 
A pale band on one side or a pale edge

Cause: the paper or heater does not make contact, or heating is uneven

Fix: check paper and heater contact and the press warm-up; a gap cannot be fixed with more time
A damaged black ring

Cause: the ring got into the heater

Fix: place the heater below the upper ring so the rings stay outside it
A pale band at the edge of the design

Cause: the design ran beyond the heater's working area

Fix: keep the design within the area the heater covers
The design blurred or the white turned brown

Cause: overheating

Fix: give the next thermos 15 s less
Pale all over

Cause: underheating or weak paper contact

Fix: check the press warm-up and paper contact, then add 10–15 s on the next one
A line at the seam

Cause: the paper parted at the seam

Fix: leave an overlap and tape the seam lengthwise

Questions and answers

 

What are the print settings for this thermos?

As a start, use MyPrint's settings for steel tumblers — 180 °C, 80 seconds, medium pressure, in a heater that wraps the body all round. If the design blurs, give the next one 15 s less; if it is pale everywhere, check the warm-up and paper contact, then add 10–15 s. The exact values depend on the press, paper, ink and room conditions, so make the first thermos from a new box a test piece.

Do the black rings with the handle come off?

The upper ring with the handle does not come off. The white body below it is printed, and the heater is placed so the rings stay out of it.

Which heater does it need?

For the Ø 9.3 cm body, consider the 15 oz, 15 × 25 cm heating element, rated for diameters of 8–9.5 cm with a height of 15 cm; check its fit on this thermos. Ask the manager whether a heater fits your press before buying it, and before the first print check that it makes close contact with the body between the rings, covers the full design height and leaves the handle outside.

What do I do with the cup when printing?

Remove the cup and the stopper: only the white body goes into the heater. Put them back once the body has cooled completely.

How should a printed thermos be washed?

By hand, with a soft sponge, without abrasives. Never in a microwave: it is metal.

What you need for printing

 

Equipment and materials for sublimation printing on this thermos.

Характеристики Thermos for sublimation metallic white (1000 ml) (7056)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product