Thermocup for sublimation metal "Coca Cola" silver (500 ml) (2996) - фото 1 - Blanks for sublimation
Top sellers
Thermocup for sublimation metal "Coca Cola" silver (500 ml) (2996) - фото 2 - Blanks for sublimation
Top sellers
  • Thermocup for sublimation metal "Coca Cola" silver (500 ml) (2996) - фото 1 - Blanks for sublimation
  • Thermocup for sublimation metal "Coca Cola" silver (500 ml) (2996) - фото 2 - Blanks for sublimation
  • Thermocup for sublimation metal "Coca Cola" silver (500 ml) (2996) - фото 1 - Blanks for sublimation
  • Thermocup for sublimation metal "Coca Cola" silver (500 ml) (2996) - фото 2 - Blanks for sublimation

Thermocup for sublimation metal "Coca Cola" silver (500 ml) (2996)

(0)
Color:
In stock
Price:
270.00 грн
Product in cart
  • The date of shipment of the goods: 2026-11-23
  • Buy a box50 штук - 13500 грн
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Thermocup for sublimation metal "Coca Cola" silver (500 ml) (2996)

A silver can tumbler for a logo on metal

 

A 500 ml steel tumbler shaped like a drinks can: a silver steel body, rounded shoulders at the top and bottom, a steel lid with a clear flip-up straw. The double steel wall keeps drinks at temperature, and the sublimation coating is only on the outer wall. Sublimation ink is transparent, so the silver metal stays in place of any white in the design — the choice for logos and lettering. The straight Ø 7 cm part of the body is printed in a 6–7 or 6.5–7.5 cm tumbler heater: a standard 11 oz heater is made for 7.5–9 cm and will not wrap this body closely. MyPrint's starting settings for tumblers are 180 °C, 80 seconds, medium pressure.

500 mlvolume
Silvermetal for a logo
180 °Cstarting settings, 80 s
Flip-up strawin the steel lid

Is this tumbler right for you

 
Your tumbler heater fits the Ø 7 cm body, makes close contact and covers the full design height
You print with sublimation ink on sublimation paper
You need a logo or lettering that sits on metal
For another volume, see the silver can tumbler, 250 ml or the silver can tumbler, 400 ml
For a white background under a photo, see the white can tumbler, 500 ml
You only print in a standard 11 oz heater for 7.5–9 cm — it will not wrap the Ø 7 cm body closely

Size and print settings

 
Ø 7 cmstraight part of the body
≈ 22 cmapproximate body circumference
Double wallsteel
Temperature
180 °Cstarting point for a tumbler in a press
Time
80 sfrom closing the preheated press
Pressure
mediumthe handle closes easily and the tumbler does not turn

These are starting settings for a heater that wraps the body all round. Tune the exact values to your press, paper, ink and room conditions — temperature and humidity — on a test tumbler.

Why this tumbler

 

A can format

It looks like a drinks can — an unusual look for a gift or merch

Metal under the logo

Unprinted areas stay silver

From file to finished tumbler

 
 
Prepare the layout
Measure the height of the straight part between the shoulders and the body circumference; add a paper overlap at the seam.
 
Print mirrored
With sublimation ink on sublimation paper.
 
Remove the lid
Together with the straw: only the steel body goes into the heater.
 
Fix the paper
Tightly all round on the straight part, with an overlap at the seam, and secure it with heat-resistant tape along the edges and the seam.
 
Key step
Press
Starting settings — 180 °C, 80 seconds, medium pressure in a tumbler heater.
 
Remove the paper
Right after the signal, wearing heat-resistant gloves.
 
Put the lid back
Once the body has cooled completely, put the lid with its straw back in place.
Tip: Make the first tumbler from each new box a test piece. If the design blurs, give the next one 15 s less; if it is pale everywhere, check the press warm-up and paper contact, then add 10–15 s. Change one setting at a time.

Can tumbler: which to choose

 
VariantColourVolumeDesign and use
Silver, 500 mlYou are hereSilver metal500 mlA logo on metal
White, 500 mlWhite background500 mlPhotos and full-colour layouts
Silver, 250 mlSilver metal250 mlA logo on metal
Silver, 350 mlSilver metal350 mlA logo on metal
Silver, 400 mlSilver metal400 mlA logo on metal

Where it works best

 
Corporate gifts
A logo on silver metal
A gift for him
A name or lettering on a steel can
Events and festivals
Understated branded merch

What can go wrong

 
A pale band on one side or a pale edge

Cause: the paper or heater does not make contact, or heating is uneven

Fix: check paper and heater contact and the press warm-up; a gap cannot be fixed with more time
A pale band near the shoulders

Cause: the design ran past the straight part, where the heater makes no contact

Fix: keep the design within the straight part of the body
The design blurred

Cause: overheating

Fix: give the next tumbler 15 s less
Pale all over

Cause: underheating or weak paper contact

Fix: check the press warm-up and paper contact, then add 10–15 s on the next one
A line at the seam

Cause: the paper parted at the seam

Fix: leave an overlap and tape the seam along its length

Questions and answers

 

What are the print settings for this tumbler?

MyPrint's starting settings for tumblers are 180 °C, 80 seconds, medium pressure, in a heater that wraps the body all round. If the design blurs, give the next one 15 s less; if it is pale everywhere, check the warm-up and paper contact, then add 10–15 s. The exact values depend on the press, paper, ink and room conditions, so make the first tumbler from a new box a test piece.

Will an ordinary mug press do?

A standard 11 oz heater is made for a 7.5–9 cm diameter, so it will not wrap the Ø 7 cm body closely. You need a tumbler heater: the 22 × 19.5 cm one for 6–7 cm or the 22 × 21.5 cm one for 6.5–7.5 cm, or the MP160 tumbler press, which comes with a 6.5–7.5 cm heater. Ask the manager whether a heater fits your press before buying it, and before the first print check that it makes close contact with the straight part of the body and covers the full design height.

What do I do with the lid when printing?

Remove it together with the straw: only the steel body goes into the heater. Put the lid back once the body has cooled.

Can I print in a sublimation oven?

Yes, after checking the dimensions: remove the lid with its straw, wrap only the steel body in paper and fit shrink film sized to the body. Check that the body with its paper and film fits inside the HO-16 oven, then preheat the oven. MyPrint's starting point for a trial is 180 °C for 4–5 minutes. Use a test tumbler to tune the exact values to the oven, paper, ink, film and room conditions, including temperature and humidity; change one setting at a time. Remove the film and paper immediately after transfer, wearing heat-resistant gloves.

White or silver — which to choose?

For a logo on metal, silver: white areas of the design stay metal. For photos and full-colour layouts, white.

How should a printed tumbler be washed?

By hand, with a soft sponge, without abrasives. Never in a microwave: it is metal.

What you need for printing

 

Equipment and materials for your chosen sublimation printing method.

Характеристики Thermocup for sublimation metal "Coca Cola" silver (500 ml) (2996)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product