Thermal bottle for sublimation metal (steel 304) with a narrow neck silver (450 ml) (10588) - фото 1 - Blanks for sublimation
Thermal bottle for sublimation metal (steel 304) with a narrow neck silver (450 ml) (10588) - фото 2 - Blanks for sublimation
  • Thermal bottle for sublimation metal (steel 304) with a narrow neck silver (450 ml) (10588) - фото 1 - Blanks for sublimation
  • Thermal bottle for sublimation metal (steel 304) with a narrow neck silver (450 ml) (10588) - фото 2 - Blanks for sublimation
  • Thermal bottle for sublimation metal (steel 304) with a narrow neck silver (450 ml) (10588) - фото 1 - Blanks for sublimation
  • Thermal bottle for sublimation metal (steel 304) with a narrow neck silver (450 ml) (10588) - фото 2 - Blanks for sublimation

Thermal bottle for sublimation metal (steel 304) with a narrow neck silver (450 ml) (10588)

(0)
Color:
Volume:
In stock
Price:
311.00 грн
Product in cart
  • The date of shipment of the goods: 2026-11-23
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Thermal bottle for sublimation metal (steel 304) with a narrow neck silver (450 ml) (10588)

A silver bottle for a logo on metal

 

A 450 ml steel narrow-neck bottle: a silver steel body, a cap in the body colour. The body is straight, with rounded shoulders and a band at the bottom; the sublimation coating is on the outside of the body. Sublimation ink is transparent, so the silver metal stays in place of any white in the design — the choice for logos and lettering. The straight part between the shoulders and the bottom band is printed in a 6.5–7.5 cm tumbler heater: a standard 11 oz heater is made for 7.5–9 cm and will not wrap the Ø 7.4 cm body closely. As a start, use MyPrint's settings for steel tumblers — 180 °C, 80 seconds, medium pressure — and confirm them on a test bottle.

450 mlvolume
Silvermetal for a logo
180 °Cstart, 80 s
Capin the body colour

Is this bottle right for you

 
Your tumbler heater fits the Ø 7.4 cm body, makes close contact and covers the full design height
You print with sublimation ink on sublimation paper
You need a logo or lettering that sits on metal
Compare these alternatives: silver narrow-neck bottle, 550 ml and matte light blue narrow-neck bottle, 550 ml
For a white background under a photo, see the white narrow-neck bottle, 450 ml
You only print in a standard 11 oz heater for 7.5–9 cm — it will not wrap the Ø 7.4 cm body closely

Size and print settings

 
Ø 7.4 cmstraight body
≈ 23.2 cmapproximate body circumference
Shoulders and neckoutside the print area
Temperature
180 °Cstart for a steel bottle in a press
Time
80 sfrom closing the preheated press
Pressure
mediumthe handle closes easily and the bottle does not turn

These are MyPrint's starting settings for steel tumblers in a heater that wraps the body all round; for the bottle, confirm them on a test piece. Tune the exact values to your press, paper, ink and room conditions — temperature and humidity.

Why this bottle

 

A bottle format

A narrow neck and a cap — for water, tea or coffee on the go

Metal under the logo

Unprinted areas stay silver

From file to finished bottle

 
 
Prepare the layout
Measure the height of the straight part between the shoulders and the bottom band and the body circumference; add a paper overlap at the seam.
 
Print mirrored
With sublimation ink on sublimation paper.
 
Remove the cap
Only the steel body goes into the heater.
 
Fix the paper
Tightly all round on the straight part, with an overlap at the seam, and secure it with heat-resistant tape along the edges and the seam.
 
Key step
Press
Starting settings — 180 °C, 80 seconds, medium pressure in a 6.5–7.5 cm tumbler heater.
 
Remove the paper
Right after the signal, wearing heat-resistant gloves.
 
Put the cap back
Once the body has cooled completely, put the cap back in place.
Tip: Make the first bottle from each new box a test piece. If the design blurs, give the next one 15 s less; if it is pale everywhere, check the press warm-up and paper contact, then add 10–15 s. Change one setting at a time.

Narrow-neck bottle: which to choose

 
VariantColourVolumeDesign and use
Silver, 450 mlYou are hereSilver metal450 mlA logo on metal
White, 450 mlWhite background450 mlPhotos and full-colour layouts
Silver, 550 mlSilver metal550 mlA logo on metal
Matte light blue, 550 mlLight blue matte coating550 mlA dark logo on colour
Matte pink, 550 mlPink matte coating550 mlA dark logo on colour

Where it works best

 
Corporate gifts
A logo on silver metal
A gift for him
A name or lettering on a steel bottle
Fitness studios and car dealers
Understated branded merch

What can go wrong

 
A pale band on one side or a pale edge

Cause: the paper or heater does not make contact, or heating is uneven

Fix: check paper and heater contact and the press warm-up; a gap cannot be fixed with more time
A pale band near the shoulders or the bottom band

Cause: the design ran past the straight part, where the heater makes no contact

Fix: keep the design within the straight part of the body
The design blurred

Cause: overheating

Fix: give the next bottle 15 s less
Pale all over

Cause: underheating or weak paper contact

Fix: check the press warm-up and paper contact, then add 10–15 s on the next one
A line at the seam

Cause: the paper parted at the seam

Fix: leave an overlap and tape the seam along its length

Questions and answers

 

What are the print settings for this bottle?

As a start, use MyPrint's settings for steel tumblers — 180 °C, 80 seconds, medium pressure, in a heater that wraps the body all round. If the design blurs, give the next one 15 s less; if it is pale everywhere, check the warm-up and paper contact, then add 10–15 s. The exact values depend on the press, paper, ink and room conditions, so make the first bottle from a new box a test piece.

Will an ordinary mug press do?

A standard 11 oz heater is made for a 7.5–9 cm diameter, so it will not wrap the Ø 7.4 cm body closely. You need a 6.5–7.5 cm heater: the 22 × 21.5 cm tumbler heater or the MP160 tumbler press, which comes with such a heater. Ask the manager whether a heater fits your press before buying it, and before the first print check that it makes close contact with the body and covers the full design height.

What do I do with the cap when printing?

Remove it: only the steel body goes into the heater. Put the cap back once the body has cooled.

Can I print in a sublimation oven?

Yes, after checking the dimensions: remove the cap, wrap only the steel body in paper and fit shrink film sized to the body. Check that the bottle with its paper and film fits inside the HO-16 oven, then preheat the oven. MyPrint's starting point for steel tumblers is 180 °C for 4–5 minutes; for the bottle, confirm it on a test piece. Tune the exact values to the oven, paper, ink, film and room conditions, including temperature and humidity; change one setting at a time. Remove the film and paper immediately after transfer, wearing heat-resistant gloves.

White or silver — which to choose?

For a logo on metal, silver: white areas of the design stay metal. For photos and full-colour layouts, white.

How should a printed bottle be washed?

By hand, with a soft sponge, without abrasives. Never in a microwave: it is metal.

What you need for printing

 

Equipment and materials for your chosen sublimation printing method.

Характеристики Thermal bottle for sublimation metal (steel 304) with a narrow neck silver (450 ml) (10588)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product