Thermal bottle for sublimation with metal lid and handle silver 750 ml (10602) - фото 1 - Blanks for sublimation
Thermal bottle for sublimation with metal lid and handle silver 750 ml (10602) - фото 2 - Blanks for sublimation
Thermal bottle for sublimation with metal lid and handle silver 750 ml (10602) - фото 3 - Blanks for sublimation
Thermal bottle for sublimation with metal lid and handle silver 750 ml (10602) - фото 4 - Blanks for sublimation
  • Thermal bottle for sublimation with metal lid and handle silver 750 ml (10602) - фото 1 - Blanks for sublimation
  • Thermal bottle for sublimation with metal lid and handle silver 750 ml (10602) - фото 2 - Blanks for sublimation
  • Thermal bottle for sublimation with metal lid and handle silver 750 ml (10602) - фото 3 - Blanks for sublimation
  • Thermal bottle for sublimation with metal lid and handle silver 750 ml (10602) - фото 4 - Blanks for sublimation
  • Thermal bottle for sublimation with metal lid and handle silver 750 ml (10602) - фото 1 - Blanks for sublimation
  • Thermal bottle for sublimation with metal lid and handle silver 750 ml (10602) - фото 2 - Blanks for sublimation
  • Thermal bottle for sublimation with metal lid and handle silver 750 ml (10602) - фото 3 - Blanks for sublimation
  • Thermal bottle for sublimation with metal lid and handle silver 750 ml (10602) - фото 4 - Blanks for sublimation

Thermal bottle for sublimation with metal lid and handle silver 750 ml (10602)

(0)
Color:
Volume:
In stock
Price:
329.00 грн
Product in cart
  • The date of shipment of the goods: 2026-11-23
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Thermal bottle for sublimation with metal lid and handle silver 750 ml (10602)

A silver bottle with a steel cap for a logo on metal

 

A 750 ml steel bottle: a silver steel body, a steel cap with a carry ring. The body is straight, with rounded shoulders; the straight Ø 7.8 cm part is printed. The double steel wall keeps drinks at temperature, and the sublimation coating is only on the outer wall. Sublimation ink is transparent, so the silver metal stays in place of any white in the design — the choice for logos and lettering. The Ø 7.8 cm body is printed in a 7.5–9 cm heater — a standard 11 oz one, or a 30 oz one in the MP170 press. As a start, use MyPrint's settings for steel tumblers — 180 °C, 80 seconds, medium pressure — and confirm them on a test bottle.

750 mlvolume
Silvermetal for a logo
180 °Cstart, 80 s
Carry ringon the steel cap

Is this bottle right for you

 
Your 7.5–9 cm heater fits the Ø 7.8 cm body, makes close contact and covers the full design height
You print with sublimation ink on sublimation paper
You need a logo or lettering that sits on metal
Compare these alternatives: the white 750 ml bottle with a steel cap and the silver 600 ml bottle with a steel cap
The design has to run onto the rounded shoulders — the heater makes no contact there

Size and print settings

 
Ø 7.8 cmstraight body
≈ 24.5 cmapproximate body circumference
Shoulders and neckoutside the print area
Temperature
180 °Cstart for a steel bottle in a press
Time
80 sfrom closing the preheated press
Pressure
mediumthe handle closes easily and the bottle does not turn

These are MyPrint's starting settings for steel tumblers in a heater that wraps the body all round; for the bottle, confirm them on a test piece. Tune the exact values to your press, paper, ink and room conditions — temperature and humidity.

Why this bottle

 

A carry ring on the cap

The bottle is easy to carry by hand or clip to a backpack

Metal under the logo

Unprinted areas stay silver

From file to finished bottle

 
 
Prepare the layout
Measure the height of the straight body up to the shoulders and its circumference; add a paper overlap at the seam.
 
Print mirrored
With sublimation ink on sublimation paper.
 
Remove the lid
Only the steel body goes into the heater.
 
Fix the paper
Tightly all round on the straight part, with an overlap at the seam, and secure it with heat-resistant tape along the edges and the seam.
 
Key step
Press
Starting settings — 180 °C, 80 seconds, medium pressure in a 7.5–9 cm heater.
 
Remove the paper
Right after the signal, wearing heat-resistant gloves.
 
Put the lid back
Once the body has cooled completely, put the lid back in place.
Tip: Make the first piece from each new box a test piece. If the design blurs, give the next one 15 s less; if it is pale everywhere, check the press warm-up and paper contact, then add 10–15 s. Change one setting at a time.

Bottle with a handle: which to choose

 
VariantColourVolume and lidDesign and use
Silver with a steel cap, 750 mlYou are hereSilver metal750 ml, steel cap with a ringA logo on metal
White with a steel cap, 750 mlWhite background750 ml, steel cap with a ringPhotos and full-colour layouts
Silver with a steel cap, 600 mlSilver metal600 ml, steel cap with a ringA logo on metal
Light blue with a steel cap, 750 mlLight blue coating750 ml, steel cap with a ringA dark logo on colour
Silver with a handle lid, 540 mlSilver metal540 ml, handle lid with a spoutA logo on metal

Where it works best

 
Corporate gifts
A logo on silver metal
A gift for him
A name or lettering on a steel bottle
Hiking clubs
Understated branded merch for the trail

What can go wrong

 
A pale band on one side or a pale edge

Cause: the paper or heater does not make contact, or heating is uneven

Fix: check paper and heater contact and the press warm-up; a gap cannot be fixed with more time
A pale band near the shoulders

Cause: the design ran past the straight part, where the heater makes no contact

Fix: keep the design within the straight part of the body
The design blurred

Cause: overheating

Fix: give the next piece 15 s less
Pale all over

Cause: underheating or weak paper contact

Fix: check the press warm-up and paper contact, then add 10–15 s on the next one
A line at the seam

Cause: the paper parted at the seam

Fix: leave an overlap and tape the seam along its length

Questions and answers

 

What are the print settings for this bottle?

As a start, use MyPrint's settings for steel tumblers — 180 °C, 80 seconds, medium pressure, in a heater that wraps the body all round. If the design blurs, give the next one 15 s less; if it is pale everywhere, check the warm-up and paper contact, then add 10–15 s. The exact values depend on the press, paper, ink and room conditions, so make the first bottle from a new box a test piece.

Which heater does it need?

One for a 7.5–9 cm diameter: the standard 11 oz heater in a mug press such as the AP1803, or the 30 oz heater in the MP170 press. Ask the manager whether a heater fits your press before buying it, and before the first print check that it makes close contact with the body and covers the full design height.

What do I do with the cap when printing?

Remove it together with the carry ring: only the steel body goes into the heater. Put it back once the body has cooled completely.

Can I print in a sublimation oven?

Yes, after checking the dimensions: remove the lid, wrap only the steel body in paper and fit shrink film sized to the body. Check that the body with its paper and film fits inside the HO-16 oven, then preheat the oven. MyPrint's starting point for steel tumblers is 180 °C for 4–5 minutes; confirm it on a test piece. Tune the exact values to the oven, paper, ink, film and room conditions, including temperature and humidity; change one setting at a time. Remove the film and paper immediately after transfer, wearing heat-resistant gloves.

White or silver — which to choose?

For a logo on metal, silver: white areas of the design stay metal. For photos and full-colour layouts, white.

How should a printed piece be washed?

By hand, with a soft sponge, without abrasives. Never in a microwave: it is metal.

What you need for printing

 

Equipment and materials for your chosen sublimation printing method.

Характеристики Thermal bottle for sublimation with metal lid and handle silver 750 ml (10602)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product