Metal leg with wall mount 50*140 mm, thickness 1 mm (12246) - фото 1 - Blanks for sublimation
Metal leg with wall mount 50*140 mm, thickness 1 mm (12246) - фото 2 - Blanks for sublimation
Metal leg with wall mount 50*140 mm, thickness 1 mm (12246) - фото 3 - Blanks for sublimation
Metal leg with wall mount 50*140 mm, thickness 1 mm (12246) - фото 4 - Blanks for sublimation
  • Metal leg with wall mount 50*140 mm, thickness 1 mm (12246) - фото 1 - Blanks for sublimation
  • Metal leg with wall mount 50*140 mm, thickness 1 mm (12246) - фото 2 - Blanks for sublimation
  • Metal leg with wall mount 50*140 mm, thickness 1 mm (12246) - фото 3 - Blanks for sublimation
  • Metal leg with wall mount 50*140 mm, thickness 1 mm (12246) - фото 4 - Blanks for sublimation
  • Metal leg with wall mount 50*140 mm, thickness 1 mm (12246) - фото 1 - Blanks for sublimation
  • Metal leg with wall mount 50*140 mm, thickness 1 mm (12246) - фото 2 - Blanks for sublimation
  • Metal leg with wall mount 50*140 mm, thickness 1 mm (12246) - фото 3 - Blanks for sublimation
  • Metal leg with wall mount 50*140 mm, thickness 1 mm (12246) - фото 4 - Blanks for sublimation

Metal leg with wall mount 50*140 mm, thickness 1 mm (12246)

(0)
Expected 05.12.2026 (через ≈ 12 days)
Price:
49.00 грн
  • Report availability
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Metal leg with wall mount 50*140 mm, thickness 1 mm (12246)

Metal leg, 50 × 140 mm, with a wall hanger

 

A metal easel leg that lets a photo panel or plate stand on a desk or hang on a wall. Double-sided tape is already applied to its short section.

50 × 140 mmleg size
slotted tabfor a nail or screw
1 mmmetal thickness

Is this stand right for you

 
You need a metal photo panel or plate to stand on a desk or hang on a wall
The mounting spot on the panel is flat, clean and dry, so the adhesive layer makes full contact
Fix it after printing: the panel goes into the heat press without the stand

Construction and mounting

 
bendalong the notch line
fixingto the back of the panel
hanging taboval slot above the adhesive section

Why this stand

 

Ready to fix

The double-sided tape is already on the leg: no separate glue needed

Desk or wall

The bent leg holds the panel on a desk, and the tab lets you hang it on a nail or screw

Ready bend line

The notch shows where to bend the leg

How to fix it to a panel

 
 
Print the panel
First print and press the photo panel and let it cool completely.
 
Clean the back
Wipe dust and grease off the spot for the leg.
 
Bend the leg
If the panel will stand on a desk, bend the leg along the notch line.
 
Remove the liner
Peel the protective liner off the tape on the leg.
 
Key step
Stick the leg
Press the leg, tab up, onto the back of the panel at the centre of its width, firmly over the whole tape area, and let the adhesive set.
 
Stand or hang the panel
Set the panel on a desk or hang it by the tab on a nail or screw, and check that it sits straight.

Photo panel stands: what to choose

 
VariantShapeFixingBest for
50 × 140 mm with wall hangerYou are hereflat leg with a slotted tab, bendsdouble-sided tape on the legdesk or wall
38 × 89 mmflat leg, bendsdouble-sided tape on the legdesktop photo panels
50 × 140 mmflat leg, bendsdouble-sided tape on the legdesktop photo panels
Cylindrical supportrod on a round footdouble-sided tape on the footpanel at an angle

Where it works best

 
Photos on a desk
A metal photo panel stands on a desk or shelf without a frame
Photos on a wall
The same panel hangs on a nail or screw without a frame
A gift ready to display
The photo panel is given with its leg, so it can stand or hang at once

What can go wrong

 
The stand came off

Cause: the mounting spot was dirty, damp or warm, or the adhesive layer is damaged or does not suit the surface

Fix: clean and dry the cooled panel; replace a damaged, dirty or unsuitable layer with double-sided mounting tape that suits this surface
The panel stands crooked

Cause: the stand was not centred

Fix: fix the stand at the centre of the panel's width
The panel slides off the wall

Cause: the nail or screw is not through the slot or cannot hold the panel's weight

Fix: hang the panel so the nail or screw passes through the slot, and choose a fixing that suits the panel's weight

Questions and answers

 

When do I fix the stand?

After printing, once the panel has cooled completely: the panel goes into the heat press without the stand.

Which panels does it suit?

Metal photo panels and plates with a flat, smooth back. Choose the stand by the panel's size and weight, and after mounting check that the panel stands steadily on a desk or hangs securely on a wall.

How do I hang the panel on a wall?

Hook the slotted tab over a nail or screw in the wall. Choose the wall fixing for the panel's weight.

Goes well with

 

Photo panels and metal for a piece on a stand.

Характеристики Metal leg with wall mount 50*140 mm, thickness 1 mm (12246)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product