Metal leg 38*89 mm, thickness 1 mm (12244) - фото 1 - Blanks for sublimation
Metal leg 38*89 mm, thickness 1 mm (12244) - фото 2 - Blanks for sublimation
Metal leg 38*89 mm, thickness 1 mm (12244) - фото 3 - Blanks for sublimation
Metal leg 38*89 mm, thickness 1 mm (12244) - фото 4 - Blanks for sublimation
Metal leg 38*89 mm, thickness 1 mm (12244) - фото 5 - Blanks for sublimation
Metal leg 38*89 mm, thickness 1 mm (12244) - фото 6 - Blanks for sublimation
  • Metal leg 38*89 mm, thickness 1 mm (12244) - фото 1 - Blanks for sublimation
  • Metal leg 38*89 mm, thickness 1 mm (12244) - фото 2 - Blanks for sublimation
  • Metal leg 38*89 mm, thickness 1 mm (12244) - фото 3 - Blanks for sublimation
  • Metal leg 38*89 mm, thickness 1 mm (12244) - фото 4 - Blanks for sublimation
  • Metal leg 38*89 mm, thickness 1 mm (12244) - фото 5 - Blanks for sublimation
  • Metal leg 38*89 mm, thickness 1 mm (12244) - фото 6 - Blanks for sublimation
  • Metal leg 38*89 mm, thickness 1 mm (12244) - фото 1 - Blanks for sublimation
  • Metal leg 38*89 mm, thickness 1 mm (12244) - фото 2 - Blanks for sublimation
  • Metal leg 38*89 mm, thickness 1 mm (12244) - фото 3 - Blanks for sublimation
  • Metal leg 38*89 mm, thickness 1 mm (12244) - фото 4 - Blanks for sublimation
  • Metal leg 38*89 mm, thickness 1 mm (12244) - фото 5 - Blanks for sublimation
  • Metal leg 38*89 mm, thickness 1 mm (12244) - фото 6 - Blanks for sublimation

Metal leg 38*89 mm, thickness 1 mm (12244)

(0)
In stock
Price:
35.00 грн
  • The date of shipment of the goods: 2026-11-23
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Metal leg 38*89 mm, thickness 1 mm (12244)

Metal leg, 38 × 89 mm, for photo panels and plates

 

A metal easel leg that lets a photo panel or plate stand on a desk or shelf. Double-sided tape is already applied to its short section.

38 × 89 mmleg size
1 mmmetal thickness
silvermetal colour

Is this stand right for you

 
You need a metal photo panel or plate to stand on a desk or shelf
The mounting spot on the panel is flat, clean and dry, so the adhesive layer makes full contact
Fix it after printing: the panel goes into the heat press without the stand

Construction and mounting

 
bendalong the notch line
fixingto the back of the panel

Why this stand

 

Ready to fix

The double-sided tape is already on the leg: no separate glue needed

Ready bend line

The notch shows where to bend the leg

How to fix it to a panel

 
 
Print the panel
First print and press the photo panel and let it cool completely.
 
Clean the back
Wipe dust and grease off the spot for the leg.
 
Bend the leg
Bend the leg along the notch line.
 
Remove the liner
Peel the protective liner off the tape on the leg.
 
Key step
Stick the leg
Press the leg onto the back of the panel at the centre of its width, firmly over the whole tape area, and let the adhesive set before you stand the panel up.
 
Stand the panel
Set the panel on a desk and check that it stands straight.

Photo panel stands: what to choose

 
VariantShapeFixingBest for
38 × 89 mmYou are hereflat leg, bendsdouble-sided tape on the legdesktop photo panels
50 × 140 mmflat leg, bendsdouble-sided tape on the legdesktop photo panels
Cylindrical supportrod on a round footdouble-sided tape on the footpanel at an angle

Where it works best

 
Photos on a desk
A metal photo panel stands on a desk or shelf without a frame
Plates on a counter
A name or number plate at a reception desk, in a hall or at an exhibition
A gift ready to stand
The photo panel is given with its stand, so it can go on display at once

What can go wrong

 
The stand came off

Cause: the mounting spot was dirty, damp or warm, or the adhesive layer is damaged or does not suit the surface

Fix: clean and dry the cooled panel; replace a damaged, dirty or unsuitable layer with double-sided mounting tape that suits this surface
The panel stands crooked

Cause: the stand was not centred

Fix: fix the stand at the centre of the panel's width

Questions and answers

 

When do I fix the stand?

After printing, once the panel has cooled completely: the panel goes into the heat press without the stand.

Which panels does it suit?

Metal photo panels and plates with a flat, smooth back. Choose the stand by the panel's size and weight, and after mounting check that the panel stands steadily.

Goes well with

 

Photo panels and metal for a piece on a stand.

Характеристики Metal leg 38*89 mm, thickness 1 mm (12244)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product