Metal for sublimation rubbed copper 61*30.5 cm (4142) - фото 1 - Blanks for sublimation
Metal for sublimation rubbed copper 61*30.5 cm (4142) - фото 2 - Blanks for sublimation
Metal for sublimation rubbed copper 61*30.5 cm (4142) - фото 3 - Blanks for sublimation
Metal for sublimation rubbed copper 61*30.5 cm (4142) - фото 4 - Blanks for sublimation
  • Metal for sublimation rubbed copper 61*30.5 cm (4142) - фото 1 - Blanks for sublimation
  • Metal for sublimation rubbed copper 61*30.5 cm (4142) - фото 2 - Blanks for sublimation
  • Metal for sublimation rubbed copper 61*30.5 cm (4142) - фото 3 - Blanks for sublimation
  • Metal for sublimation rubbed copper 61*30.5 cm (4142) - фото 4 - Blanks for sublimation
  • Metal for sublimation rubbed copper 61*30.5 cm (4142) - фото 1 - Blanks for sublimation
  • Metal for sublimation rubbed copper 61*30.5 cm (4142) - фото 2 - Blanks for sublimation
  • Metal for sublimation rubbed copper 61*30.5 cm (4142) - фото 3 - Blanks for sublimation
  • Metal for sublimation rubbed copper 61*30.5 cm (4142) - фото 4 - Blanks for sublimation

Metal for sublimation rubbed copper 61*30.5 cm (4142)

(0)
Color: Copper
Surface:
In stock
Price:
166.00 грн
Product in cart
  • The date of shipment of the goods: 2026-11-23
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Metal for sublimation rubbed copper 61*30.5 cm (4142)

Aluminium sheet with a copper base and a brushed surface

 

Aluminium sheet with a special sublimation coating: under the press the dye from the paper sinks into the coating and the image becomes part of the surface. The coating is clear: where there is no dye, the base itself shows — copper. The large format suits a wall panel or cutting into several plates.

Copper baseblank areas show copper
Brusheddecorative brushed texture
0.45 mmaluminium thickness
185–200 °Cstarting setting, 50–70 s

Is this sheet right for you

 
You have a flat heat press with a work area of 32.5 × 63 cm or more — 61 × 30.5 cm fits with room to spare
You print with sublimation inks on sublimation paper
White in the design does not print: that spot shows copper. For white elements take the white base in the same size
For an outdoor piece see the outdoor sheets in the sublimation metal section
You need opaque white over metal — plain sublimation does not print it

Sizes and press settings

 
61 × 30.5 cmsize
32.5 × 63 cm or morepress work area
1 sidethe coating under the film is printed
filmremoved before pressing
Temperature
185–200 °Cstart for a 0.45 mm plate
Time
50–70 scounted from closing the heated press
Pressure
light or mediumthe plate lies flat, without bending

These are starting settings: the exact ones depend on your press, paper, inks and room conditions — temperature and humidity.

Why this sheet

 

Metal in the design

Blank areas show copper: black lettering on bare metal looks like a classic metal plate

Brushed surface

The brushed texture creates a decorative effect. Check how strongly it shows through your image on a test print.

0.45 mm thick

the most common thickness in our range; aluminium is cut with a guillotine metal cutter

No minimum order

You can buy a single sheet for a specific order

From file to finished plate

 
 
Cut the sheet
If the piece is smaller than the sheet, cut the metal before printing, while the film still protects the coating.
 
Remove the film
Peel the protective film off the front right before pressing: the coating under it is what you print on.
 
Print mirrored
With sublimation inks on sublimation paper, with 2–3 mm of bleed past the plate edge.
 
Fix the paper
Tape the paper to the plate with heat tape so it does not shift during pressing.
 
Key step
Press
The paper goes on the lower platen image up, the plate coating down. Starting settings: 185–200 °C, 50–70 s, light or medium pressure.
 
Remove the paper and let it cool
Lift the paper off in one movement without sliding it across the plate. The plate is very hot: hold it by the edges with heat-resistant gloves and let it cool on a flat surface.
 
Assess the test print
Once it has cooled, check transfer uniformity and colour appearance. For a pale or patchy print, check the materials and press contact first, then adjust the settings on a fresh test blank.
Tip: Before a production run, test a separate blank of the same size, thickness and coating. Adjust the starting settings for your press, paper, inks, room temperature and humidity, changing one setting at a time.

Sublimation metal: what to choose

 
VariantThicknessBaseSurfaceBest for
61 × 30.5 cmYou are here0.45 mmcopperbrushedA wall panel or several plates from one sheet
20 × 30.5 cm0.45 mmcopperbrushedPlates, photos, business cards after cutting

Where it works best

 
Award plates
Black or colour lettering on bare metal for diplomas and certificates
Door plates and nameplates
Office, study, equipment — the plate looks like real metal
Business cards and badges
You cut the sheet into small plates and print a run

What can go wrong

 
The surface turned dull

Cause: overheating: too many degrees or seconds

Fix: on a test plate lower the time or the temperature, changing one setting at a time
Colours look pale

Cause: possible underheating, uneven contact or unsuitable materials

Fix: check the paper, inks and press contact; after correcting the cause, adjust the settings on a fresh test blank, changing one setting at a time
Patches, some ink stayed on the paper

Cause: uneven pressure or cold spots on the platen

Fix: check pressure and temperature uniformity across the working area; make a new test after correcting the problem
Double outline

Cause: the paper shifted during pressing or removal

Fix: fix the paper with heat tape and lift it off in one movement without sliding it across the plate
Scratches on the finished piece

Cause: the film came off too early or the plate was held by its face

Fix: remove the film right before pressing and hold the plate by its edges
White lettering turned copper

Cause: sublimation does not print white: blank areas show the metal

Fix: for white elements take a white base; on metal use dark lettering

Questions and answers

 

Can I print white?

No: plain sublimation does not print white. Where the design is white, the copper colour of the base will show through the coating. For white elements take a white base.

Which side do I print on?

The one under the protective film: it carries the sublimation coating. Remove the film right before pressing.

Can I cut the sheet?

Yes, with a guillotine metal cutter, ideally before printing while the coating is under the film. You can also order cutting to your size from us.

Which press will do?

A flat heat press whose work area is at least a centimetre larger than the plate on each side. For 61 × 30.5 cm that is 32.5 × 63 cm or more, for example HP570DP 50×70.

What temperature and time?

Starting settings: 185–200 °C, 50–70 s, light or medium pressure. The exact values depend on the press, paper and inks, so make the first plate a test.

How do the thicknesses differ?

A thicker plate is stiffer and bends less; a thinner one is lighter and easier to cut. This sheet is 0.45 mm; thicker plates need more pressing time.

Can I hang it outdoors?

This sheet is for indoor use. For façades and gates take sheets from the outdoor range.

What you need for printing

 

What you need to turn the sheet into a finished plate or photo panel.

Характеристики Metal for sublimation rubbed copper 61*30.5 cm (4142)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product