Metal for sublimation glossy white 20*30 cm, thickness 0.45 mm (3744)
- The date of shipment of the goods: 2026-11-23
- Ask a question for this product
Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.
- Return guarantee
We guarantee a refund if you are not satisfied with the product
- Доставка
Delivery across Ukraine to any settlement
Description Metal for sublimation glossy white 20*30 cm, thickness 0.45 mm (3744)
Aluminium sheet with a white base and a gloss surface
Aluminium sheet with a special sublimation coating: under the press the dye from the paper sinks into the coating and the image becomes part of the surface. The white base stays visible in unprinted areas. Check colour appearance on a test print.
Is this sheet right for you
Sizes and press settings
These are starting settings: the exact ones depend on your press, paper, inks and room conditions — temperature and humidity.
Why this sheet
White base
White areas of the design stay white, so photos and colour logos come out without a metallic tint
Gloss surface
Rich colours with shine: photos and logos look vivid.
0.45 mm thick
the most common thickness in our range; aluminium is cut with a guillotine metal cutter
No minimum order
You can buy a single sheet for a specific order
From file to finished plate
Sublimation metal: what to choose
| Variant | Thickness | Base | Surface | Best for |
|---|---|---|---|---|
| 20 × 30 cmYou are here | 0.45 mm | white | gloss | Plates, photos, business cards after cutting |
| 20 × 30 cm | 0.35 mm | white | gloss | Plates, photos, business cards after cutting |
| 60 × 30 cm | 0.35 mm | white | gloss | A wall panel or several plates from one sheet |
| 60 × 30 cm | 0.45 mm | white | gloss | A wall panel or several plates from one sheet |
| 120 × 60 cm | 0.45 mm | white | gloss | Cutting a run of plates and blanks |
| 20 × 30 cm | 0.45 mm | white | matte | Plates, photos, business cards after cutting |
Where it works best
What can go wrong
Cause: overheating: too many degrees or seconds
Cause: possible underheating, uneven contact or unsuitable materials
Cause: uneven pressure or cold spots on the platen
Cause: the paper shifted during pressing or removal
Cause: the film came off too early or the plate was held by its face
Questions and answers
Can I print white?
Which side do I print on?
Can I cut the sheet?
Which press will do?
What temperature and time?
How do the thicknesses differ?
Can I hang it outdoors?
How do I stand a photo panel on a desk?
What you need for printing
What you need to turn the sheet into a finished plate or photo panel.










































