Cup for sublimation rubberized (Soft-touch) blue 11 Oz (330 ml) (6446) - фото 1 - Blanks for sublimation
Cup for sublimation rubberized (Soft-touch) blue 11 Oz (330 ml) (6446) - фото 2 - Blanks for sublimation
Cup for sublimation rubberized (Soft-touch) blue 11 Oz (330 ml) (6446) - фото 3 - Blanks for sublimation
  • Cup for sublimation rubberized (Soft-touch) blue 11 Oz (330 ml) (6446) - фото 1 - Blanks for sublimation
  • Cup for sublimation rubberized (Soft-touch) blue 11 Oz (330 ml) (6446) - фото 2 - Blanks for sublimation
  • Cup for sublimation rubberized (Soft-touch) blue 11 Oz (330 ml) (6446) - фото 3 - Blanks for sublimation
  • Cup for sublimation rubberized (Soft-touch) blue 11 Oz (330 ml) (6446) - фото 1 - Blanks for sublimation
  • Cup for sublimation rubberized (Soft-touch) blue 11 Oz (330 ml) (6446) - фото 2 - Blanks for sublimation
  • Cup for sublimation rubberized (Soft-touch) blue 11 Oz (330 ml) (6446) - фото 3 - Blanks for sublimation

Cup for sublimation rubberized (Soft-touch) blue 11 Oz (330 ml) (6446)

(0)
Color: Blue
Not available
Price:
107.00 грн
  • Buy a box36 штук - 3852 грн
  • Report availability
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Cup for sublimation rubberized (Soft-touch) blue 11 Oz (330 ml) (6446)

A blue soft-touch mug for a dark, saturated design

 

A 330 ml ceramic mug in the standard 11 oz shape: a blue rubberised soft-touch coating outside and on the handle, pleasant to the touch, and white glaze inside. Sublimation ink is transparent, so the blue shows through the design: colours darken and take on its tint, and the coating colour stays in place of any white in the design. That is why dark, saturated lettering, silhouettes and logos look best. Ø 8 cm is within the range of a standard 11 oz heater (7.5–9 cm); before the first print, check that the heater makes close contact with the body and covers the full design height. For the rubberised coating, work within the general mug range of 180–200 °C for 150–180 seconds: start at the low end — 180 °C for 150 seconds.

Bluecoating colour
330 mlvolume
180 °Ctrial start, 150 s
36 pcsper carton, also sold singly

Is this mug right for you

 
Your heater matches the body diameter, makes close contact with the smooth print area and covers the full design height, with clearance for the handle
You print with sublimation ink on sublimation paper
You need a mug with an unusual feel for a dark, saturated logo or lettering
For a glossy surface, see the neon blue mug or the Full Color blue mug.
You need a photo with accurate colours or white elements — on the blue coating they blend with the mug colour; take the white Premium+ 11 oz
You only print in a small heater for a 6.5–7.5 cm diameter — it is too small for a Ø 8 cm mug

Size and print settings

 
Ø 8 cmdiameter
Cylindricalshape
Ceramicmaterial
Soft-touchsurface
Temperature
180–200 °Cstart with 180 °C
Time
150–180 sstart with 150 s from closing the preheated press
Pressure
mediumthe press handle closes with moderate resistance

These are starting settings: the exact ones are tuned to your press, paper, ink and room conditions — temperature and humidity.

Why this mug

 

Pleasant to the touch

The rubberised coating feels different from ordinary glaze

Printed like a coloured mug

The same paper and ink as for ordinary mugs

From file to finished mug

 
 
Prepare the layout
Use dark, saturated colours: the blue shows through the ink, and there is no white. Measure the wall height and the circumference without the handle zone on the mug itself.
 
Print mirrored
With sublimation ink on the white side of sublimation paper.
 
Let it dry
The paper dries quickly; a damp print blurs the outline.
 
Fix the paper
Wrap the mug tightly with no gaps and secure the edges with heat-resistant tape.
 
Key step
Press
Start with 180 °C for 150 seconds at medium pressure.
 
Remove the paper
Right after the signal, wearing heat-resistant gloves, without sliding the sheet over the hot surface.
 
Let it cool
Let the mug cool completely before judging the print and packing it.
Tip: Make the first mug of a batch a test piece and judge it once cool. A pale print — add 15–30 s; if the coating changed its look or the outline blurred — shorten the time or lower the temperature; change one setting at a time.

Bright blue mug: which to choose

 
VariantCoatingPrintDesign and use
Soft-touch blueYou are hereRubberised soft-touch coatingDark, saturated designAn unusual feel in the hand
Soft-touch orangeRubberised soft-touch coatingDark, saturated designAn unusual feel in the hand
Full Color blueColoured glaze outside and insideDark, saturated designA one-colour logo
Neon blueNeon colour outside and on the handleDark, saturated designA bright brand accent
White Premium+ 11 ozWhite glazeFull-colour printPhotos and logos

Where it works best

 
Corporate gifts
A dark logo on a mug with an unusual feel
Gifts with character
A name or a short phrase on a rubberised mug
Office and studio
A noticeable mug with a logo for the team

What can go wrong

 
White parts of the design disappeared

Cause: sublimation ink is transparent and has no white

Fix: the blue coating shows in place of white: do not plan white into the design
A pale print

Cause: underheating or weak pressure

Fix: add 15–30 s on a fresh test mug and check heater contact
The coating changed its look

Cause: overheating

Fix: shorten the time or lower the temperature on a fresh test mug, changing one setting at a time
Ghosted outline

Cause: the paper shifted on the hot mug

Fix: tape the edges and remove the sheet in one motion without dragging it over the surface

Questions and answers

 

Can white be printed?

No: sublimation ink is transparent, so white in the design is the coating colour. For white lettering take the white Premium+ 11 oz.

What are the print settings?

For the rubberised coating, work within the general mug range of 180–200 °C for 150–180 seconds. Start at the low end — 180 °C for 150 seconds on a test mug: a pale print — add 15–30 s; if the coating changed its look — shorten the time or lower the temperature. The exact values depend on your press, paper, ink and room conditions.

Which press will do?

A mug heat press whose heater wraps the Ø 8 cm body tightly and covers the full height of the design, for example with a standard 11 oz heater for 7.5–9 cm in the AP1803 press; check this before the first print.

How should this mug be washed?

By hand, with a soft sponge and a mild detergent, without abrasives: both the print and the coating keep their look longer. Pass this tip on to your customer with the mug.

What you need for printing

 

Everything it takes to turn this mug into a finished gift: a press, paper, ink and packaging.

Характеристики Cup for sublimation rubberized (Soft-touch) blue 11 Oz (330 ml) (6446)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product