Cup for sublimation metal "Starbucks" white (350 ml) (8374) - фото 1 - Blanks for sublimation
Cup for sublimation metal "Starbucks" white (350 ml) (8374) - фото 2 - Blanks for sublimation
  • Cup for sublimation metal "Starbucks" white (350 ml) (8374) - фото 1 - Blanks for sublimation
  • Cup for sublimation metal "Starbucks" white (350 ml) (8374) - фото 2 - Blanks for sublimation
  • Cup for sublimation metal "Starbucks" white (350 ml) (8374) - фото 1 - Blanks for sublimation
  • Cup for sublimation metal "Starbucks" white (350 ml) (8374) - фото 2 - Blanks for sublimation

Cup for sublimation metal "Starbucks" white (350 ml) (8374)

(0)
Color: White
Volume:
In stock
Price:
230.00 грн
Product in cart
  • The date of shipment of the goods: 2026-11-23
  • Buy a box50 штук - 11500 грн
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Cup for sublimation metal "Starbucks" white (350 ml) (8374)

A white metal mug for photos and full-colour print

 

A 350 ml metal mug with a straight Ø 8.7 cm body and a thin metal handle in the body colour: a white coating for print. Metal is less fragile than ceramic, making the mug a practical choice for travel or gifts sent by post. The white coating is the base for photos and full-colour designs; unprinted areas stay white. The body is printed in a mug press with a 7.5–9 cm heater, with the handle outside; MyPrint's starting settings for metal mugs are 180 °C, 60 seconds.

350 mlvolume
Whitecoating for full-colour print
180 °Cstarting settings, 60 s
Metal handlestays outside the heater

Is this mug right for you

 
You have a mug or combination press with a 7.5–9 cm heater; before printing, check heater contact with the body and coverage of the design height
You print with sublimation ink on sublimation paper
You print photos, full-colour layouts or logos on a white background
For a logo that sits on metal, see the silver 350 ml Starbucks-style metal mug
Drinks are heated in a microwave — a metal mug never goes in one

Size and print settings

 
Ø 8.7 cmstraight body
Straight wallrounded edge at the base
7.5–9 cm heaterthe standard mug heater
Temperature
180 °Cstarting point for a metal mug
Time
60 sfrom closing the preheated press
Pressure
mediumthe press handle closes easily and the mug does not turn

These are MyPrint's starting settings for metal mugs; for this mug, confirm them on a test piece. Tune the exact values to your press, paper, ink and room conditions — temperature and humidity.

Why this mug

 

Less fragile than ceramics

The metal body is less prone to breakage during transport than ceramic

A white background for photos

Photos, full-colour designs and text sit on a white background; check the colours on a test mug

From file to finished mug

 
 
Prepare the layout
Measure the height of the straight wall and the usable print width on the mug, allowing clearance beside the handle; keep key elements away from the rounded edge at the base.
 
Print mirrored
With sublimation ink on sublimation paper.
 
Fix the paper
Fit the paper tightly within the checked print area, leaving clearance beside the handle, and secure it with heat-resistant tape along the edges.
 
Place it in the heater
The handle stays outside, in the heater's opening, while the heater wraps the body closely.
 
Key step
Press
Starting settings — 180 °C, 60 seconds, medium pressure.
 
Remove the paper
Right after the signal, wearing heat-resistant gloves, without sliding the sheet over the hot metal.
 
Let it cool
The metal stays hot for a few minutes; after that the mug can be packed.
Tip: Make the first mug from a new batch a test piece. If it is pale, check heater and paper contact, then add a few seconds on the next trial; if the design blurs or the white yellows, shorten the time. Change one setting at a time.

Metal mug: which to choose

 
VariantBodyVolumeHandle
Silver, metal handle, 350 mlSilver metal350 mlMetal, silver
White, metal handle, 350 mlYou are hereWhite coating350 mlMetal, white
Silver, plastic handle, 300 mlSilver metal300 mlPlastic, black

Where it works best

 
Gifts for soldiers
A personalised mug with a call sign or emblem, suitable for a gift parcel
Travel and weekends away
A mug personalised with a name or message
Corporate merch
A logo on a metal mug for the team and partners

What can go wrong

 
A pale band near the base

Cause: the rounded edge at the base contacts the heater less than the wall

Fix: keep key elements on the straight part of the wall
Pale patches around the body

Cause: the heater or paper is not in close contact

Fix: check contact all the way round; a gap cannot be fixed with more time
The white area yellows

Cause: overheating

Fix: shorten the time on the next trial
A shadowed outline

Cause: the paper shifted on the hot metal

Fix: tape the edges and lift the sheet off in one movement

Questions and answers

 

What are the print settings for this mug?

MyPrint's starting settings for metal mugs are 180 °C, 60 seconds, medium pressure in a 7.5–9 cm heater; for this mug, confirm them on a test piece. If it is pale, check contact and add a few seconds; if the design blurs, shorten the time.

Which heater does it need?

The standard 7.5–9 cm mug heater in a mug or combination press. Before the first print, check that the heater makes close contact with the Ø 8.7 cm body, covers the full design height and leaves room for the handle.

Can the handle be printed?

Print on the body in a mug press; the handle stays outside, in the heater's opening.

How is a white metal mug different from a ceramic one?

The print sits on a white coating just the same, but the body is metal: it is less fragile and travels better. A metal mug never goes in a microwave.

Can it go in a microwave or a dishwasher?

Never in a microwave: it is metal. Wash it by hand with a soft sponge and no abrasives — the print keeps its brightness longer.

What you need for printing

 

Equipment and materials for printing on a metal mug.

Характеристики Cup for sublimation metal "Starbucks" white (350 ml) (8374)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product