Sublimation mug metal enamel white with silver rim (500 ml) (10153) - фото 1 - Blanks for sublimation
Sublimation mug metal enamel white with silver rim (500 ml) (10153) - фото 2 - Blanks for sublimation
  • Sublimation mug metal enamel white with silver rim (500 ml) (10153) - фото 1 - Blanks for sublimation
  • Sublimation mug metal enamel white with silver rim (500 ml) (10153) - фото 2 - Blanks for sublimation
  • Sublimation mug metal enamel white with silver rim (500 ml) (10153) - фото 1 - Blanks for sublimation
  • Sublimation mug metal enamel white with silver rim (500 ml) (10153) - фото 2 - Blanks for sublimation

Sublimation mug metal enamel white with silver rim (500 ml) (10153)

(0)
Rim color:
In stock
Price:
125.00 грн
Product in cart
  • The date of shipment of the goods: tomorrow (20.11.2026)
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Sublimation mug metal enamel white with silver rim (500 ml) (10153)

A 500 ml enamel mug with a silver rim for full-colour print

 

A 500 ml metal mug in the style of a classic enamel camp mug: a straight wall, a rolled silver rim, a tubular handle and white enamel outside and inside. The print goes onto the white coating, so the design comes out as on a white mug and white areas stay white. Metal is less fragile than ceramic, which makes this mug a good fit for hiking, the country house and retro-style cafés. Ø 8.9 cm is within the range of a standard 11 oz heater (7.5–9 cm). The rolled rim is wider than the wall, so before the first print check that the heater makes close contact with the wall below the rim and covers the full design height. For a mug press held at a constant set temperature, a trial starting point is about 200 °C for 4–6 minutes, depending on the coating and the press; start with 200 °C and 4 minutes on a test mug.

Whiteenamel for full-colour print
500 mlvolume
200 °Cstart, 4 min on a test mug
Metalless fragile than ceramic

Is this mug right for you

 
Your heater fits Ø 8.9 cm, makes close contact with the wall below the rim and covers the full design height, with clearance for the handle
You print with sublimation ink on sublimation paper
You need a retro or camping-style mug with a photo, logo or lettering
You need another volume — there is the white, silver rim, 250 ml mug and the white, silver rim, 330 ml mug
Drinks are heated in a microwave — a metal mug never goes in there; take the ceramic white Premium+ 11 oz

Size and print settings

 
Ø 8.9 cmdiameter
Cylindricalshape
Silverrolled rim
White enamelinside
Temperature
195–205 °Capproximate starting range for a constant-temperature press
Time
4–6 minstart with 4 min from closing the press preheated to the selected temperature
Pressure
mediumthe handle goes down with moderate resistance

These are starting settings: the exact ones are tuned to your press, paper, ink and room conditions — temperature and humidity.

Why this mug

 

Retro style, modern print

A classic enamel mug carrying a full-colour photo or logo

Metal instead of ceramic

Less fragile than ceramic, making it a practical choice for travel and shipping

From file to finished mug

 
 
Prepare the layout
Measure the wall height between the rim and the base and the circumference without the handle zone on the mug itself; keep important elements 6–10 mm away from the rim and the base.
 
Print mirrored
With sublimation ink on the white side of sublimation paper.
 
Let it dry
The paper dries quickly; a damp print blurs the outline.
 
Fix the paper
Wrap the wall below the rim tightly with no gaps and secure the edges with heat-resistant tape.
 
Key step
Press
Starting settings — 200 °C, 4 minutes, medium pressure; keep the rolled rim outside the heater.
 
Remove the paper
Right after the signal, wearing heat-resistant gloves, without sliding the sheet over the hot surface.
 
Let it cool
Let the mug cool completely before packing it.
Tip: Make the first mug of a batch a test piece: if colours are pale, add 30–60 seconds; if the outline blurs, cut the time by 30 seconds. Change one setting at a time.

Enamel mug: which to choose

 
VariantRimVolumeBest for
White, silver rim, 500 mlYou are hereSilver500 mlA large mug of tea
White, black rim, 500 mlBlack500 mlA large mug of tea
White, silver rim, 330 mlSilver330 mlA lighter retro look
White, silver rim, 250 mlSilver250 mlA small cup of coffee
Light pink, 330 mlSilver330 mlGift designs in pastel colours

Where it works best

 
Hiking and outdoor clubs
A club logo or route on mugs for members
Retro-style cafés
A branded mug with a logo for guests and for sale
Gifts
A photo or lettering on a vintage-style mug

What can go wrong

 
Pale edge near the rim or base

Cause: right at the rim and the base the heater makes weaker contact and heats less

Fix: keep important elements 6–10 mm away from the rim and base, and keep the rim outside the heater
Pale colours across the whole design

Cause: underheating: too little time for your press

Fix: on a fresh test mug, add 30–60 seconds without changing the temperature
The outline blurred

Cause: overheating: too many seconds for your press

Fix: on a fresh test mug, cut the time by 30 seconds
The print faded within a few months

Cause: dishwasher and abrasive sponges

Fix: wash by hand with a soft sponge — the print keeps its brightness longer

Questions and answers

 

How long should an enamel mug stay in the press?

For a mug press held at a constant set temperature, a trial starting point is about 200 °C for 4–6 minutes, depending on the coating and the press. Start with 200 °C and 4 minutes on a test mug: if colours are pale, add 30–60 seconds; if the outline blurs, cut the time by 30 seconds.

Can the mug go in a microwave?

No: the mug is metal, and metal never goes into a microwave. For the microwave, take the ceramic white Premium+ 11 oz.

Can the rim and handle be printed?

No: the print goes onto the coated wall, while the rolled rim and the tubular handle stay as they are.

Which press will do?

A mug heat press whose heater wraps the Ø 8.9 cm wall below the rim tightly and covers the full design height, for example with a standard 11 oz heater for 7.5–9 cm in the AP1803 press; check this before the first print.

How should this mug be washed?

By hand, with a soft sponge and a mild detergent, not in a dishwasher. Pass this tip on to your customer with the mug.

What you need for printing

 

Everything it takes to turn this mug into a finished gift: a press, paper, ink and packaging.

Характеристики Sublimation mug metal enamel white with silver rim (500 ml) (10153)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product