Cup for sublimation white latte with silicone lid and red rim (6439) - фото 1 - Blanks for sublimation
  • Cup for sublimation white latte with silicone lid and red rim (6439) - фото 1 - Blanks for sublimation
  • Cup for sublimation white latte with silicone lid and red rim (6439) - фото 1 - Blanks for sublimation

Cup for sublimation white latte with silicone lid and red rim (6439)

(0)
Handle:
Not available
Price:
102.00 грн
  • Buy a box36 штук - 3672 грн
  • Report availability
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Cup for sublimation white latte with silicone lid and red rim (6439)

A porcelain to-go coffee cup for sublimation

 

A to-go coffee cup for a café logo, a name or a photo. The silicone sleeve covers the middle of the wall, so the key elements of the design go into the free white bands above and below it.

330 mlvolume
170–200 °Cstarting range, 200–240 s
Conical heater12 oz
Arc templatelayout for the cone

Is this cup right for you

 
Your 12 oz conical heater makes close contact with the conical wall and covers the full design height
You print with sublimation ink on sublimation paper
You need a to-go coffee cup with a logo: for a café, an office or a gift
You need a cup with a handle — there is the white 12 oz latte mug or the white 17 oz latte mug
You only print in a straight heater for ordinary mugs — the narrow part of the cone will come out pale

Size and print settings

 
Conicalshape, wider at the top
Porcelainmaterial
Glossy whitewall for printing
Red siliconelid and sleeve, removable
No handlelike a to-go coffee cup
Temperature
170–200 °Cstarting point for a porcelain cup
Time
200–240 scount from closing the preheated press
Pressure
mediumthe press handle goes down with moderate resistance

These are starting settings: the exact ones are tuned to your press, paper, ink and room conditions — temperature and humidity.

Why this cup

 

A lid with a drinking opening

You drink without taking the lid off — on the road or at the desk

Full-colour print

The glossy white porcelain wall carries photos and fine lettering

From file to finished cup

 
 
Take off the lid and sleeve
Only the white porcelain wall takes the print; the silicone parts never go into the heater.
 
Make an arc template
Wrap the cup in a sheet all the way round, trace the top and bottom edges and step in 5 mm from each.
 
Prepare the layout
Fit the design into the template's arc; put a name or logo into the bands the sleeve leaves free, and the sheet's seam where the design has nothing important.
 
Print mirrored
With sublimation ink on the white side of sublimation paper.
 
Fix the paper
Wrap the cup tightly with no gaps and secure the edges with heat-resistant tape.
 
Place it in the heater
The wide edge of the cup goes in the wide end of the 12 oz conical heater.
 
Key step
Press
Starting range — 170–200 °C, 200–240 seconds, medium pressure.
 
Remove the paper
Right after the signal, wearing heat-resistant gloves, without sliding the sheet over the hot surface.
 
Put the sleeve and lid back
Once the cup has cooled completely.
Tip: Make the first cup of a batch a test piece: start in the middle of the range and change one setting at a time — add time if the print is pale, reduce time or temperature if the white turns yellow or the outline ghosts.

Coffee cup: which to choose

 
VariantShapeVolumeFor whom
White, red lid and sleeveYou are hereNo handle, lid and sleeve330 mlCoffee to go
White latte, 12 oz (350 ml)Latte with a handle, white350 mlCafés and gifts
White latte, 17 oz (500 ml)Latte with a handle, white500 mlLarge servings
Red-inside latte, 12 ozLatte with a handle, red inside350 mlA bright accent
White Premium+ 11 ozClassic with a handle, white330 mlClassic: full-colour print

Where it works best

 
Cafés
The venue's logo on a to-go coffee cup
Office and corporate merch
A company logo on a cup for the desk
Gifts
A name or a photo on a cup for coffee on the go

What can go wrong

 
Pale narrow part

Cause: a straight heater does not sit against the cone

Fix: use a conical heater of the cup's size for a trial only after checking close contact across the entire print area
Skewed design

Cause: a rectangular layout on a cone

Fix: fit the design into an arc using a template taken from the cup
The logo hides under the sleeve

Cause: the key element sits in the middle of the wall

Fix: put a name or logo into the free white bands above and below the sleeve
Ghosted outline

Cause: the paper shifted on the hot cup

Fix: tape the edges and remove the sheet in one motion
The white area turns yellow

Cause: overheating: too many degrees or seconds

Fix: on a fresh test cup, adjust the starting settings, changing one setting at a time
The print faded within a few months

Cause: dishwasher and abrasive sponges

Fix: wash by hand with a soft sponge — the print keeps its brightness longer

Questions and answers

 

Do the lid and sleeve come off?

Yes: take both off before printing — the print goes only on the white porcelain wall. Put them back once the cup has cooled completely.

Which heater does it need?

A conical heater of its size: 12 oz for 330 ml, for example the 12 oz latte mug heating element. Before the first print, check that the heater makes close contact with the cone and covers the full design height; in a straight heater the narrow part comes out pale.

How do I make a layout for a conical cup?

Wrap the cup in a sheet all the way round, trace the top and bottom edges and step in 5 mm — that is the arc template. Fit the design into it: a rectangular layout skews on a cone.

What temperature does it need?

The starting range is 170–200 °C and 200–240 seconds with medium pressure. Start in the middle of the range on a test cup and tune it to your press, paper, ink and room conditions.

How should a sublimated cup be washed?

By hand, with a soft sponge and a mild detergent. The print keeps its brightness longer, so pass this tip on to your customer with the cup.

What you need for printing

 

Everything needed to print on this cup: a conical heater, paper, ink and heat-resistant tape.

Характеристики Cup for sublimation white latte with silicone lid and red rim (6439)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product