Six-blade cap cotton Vintage children's shabby green (12041) - фото 1 - Blanks for sublimation
Six-blade cap cotton Vintage children's shabby green (12041) - фото 2 - Blanks for sublimation
Six-blade cap cotton Vintage children's shabby green (12041) - фото 3 - Blanks for sublimation
Six-blade cap cotton Vintage children's shabby green (12041) - фото 4 - Blanks for sublimation
Six-blade cap cotton Vintage children's shabby green (12041) - фото 5 - Blanks for sublimation
  • Six-blade cap cotton Vintage children's shabby green (12041) - фото 1 - Blanks for sublimation
  • Six-blade cap cotton Vintage children's shabby green (12041) - фото 2 - Blanks for sublimation
  • Six-blade cap cotton Vintage children's shabby green (12041) - фото 3 - Blanks for sublimation
  • Six-blade cap cotton Vintage children's shabby green (12041) - фото 4 - Blanks for sublimation
  • Six-blade cap cotton Vintage children's shabby green (12041) - фото 5 - Blanks for sublimation
  • Six-blade cap cotton Vintage children's shabby green (12041) - фото 1 - Blanks for sublimation
  • Six-blade cap cotton Vintage children's shabby green (12041) - фото 2 - Blanks for sublimation
  • Six-blade cap cotton Vintage children's shabby green (12041) - фото 3 - Blanks for sublimation
  • Six-blade cap cotton Vintage children's shabby green (12041) - фото 4 - Blanks for sublimation
  • Six-blade cap cotton Vintage children's shabby green (12041) - фото 5 - Blanks for sublimation

Six-blade cap cotton Vintage children's shabby green (12041)

(0)
In stock
Price:
169.00 грн
  • The date of shipment of the goods: 2026-11-23
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Six-blade cap cotton Vintage children's shabby green (12041)

Kids Vintage washed cotton cap for DTF, flex and embroidery

 

A kids six-panel cotton cap, washed so that the colour is slightly uneven and the seams and visor edge look worn. A name or emblem goes on the front with a DTF transfer or flex on a cap heat press, or is embroidered.

Cottonwashed, with a worn effect
6 panelsa seam down the centre of the front
51 cmkids head size
Metal buckleadjusts the fit at the back

Is this cap right for you

 
You apply DTF transfers, flex or embroidery
You have a cap heat press or a cap platen
The shade and worn detailing may vary slightly from cap to cap
You print with sublimation — choose a kids trucker cap with a white polyester front

Sizes and transfer settings

 
size to fitcheck the design size by trying a sheet on the cap
1–1.5 cmfrom the visor seam to the design
contact near the seamthe seam may hinder bonding; check on a test
Temperature
150–160 °Creference for DTF and flex
Time
10–15 sfollow the film manufacturer's instructions
Pressure
mediumreference only; follow the film's pressure instructions

These are starting settings: the film maker gives the exact ones, and they are tuned to your press and room conditions — temperature and humidity.

Why this cap

 

A worn-in look

Uneven colour and wear along the seams give the cap character, so even a simple logo looks good

Several ways to decorate

DTF gives full colour and fine detail, flex gives crisp one-colour lettering, embroidery gives a raised logo

One cut in many colours

A team can wear caps of different colours with the same fit

How to apply a logo

 
 
Prepare the transfer
Hold a sheet against the front and mark the area that lies flat; fit the DTF transfer or flex within it; place the bottom of the design 1–1.5 cm above the visor seam.
 
Heat the press
Fit the cap platen and use the settings in the film instructions; 150–160 °C for 10–15 s is only a starting reference. Wait until the press reaches the set temperature.
 
Put the cap on the form
Fold the sweatband out, pull the cap over the lower form with the visor towards you and fasten the buckle: the front must sit tight, without folds.
 
Pre-press the front
Follow the chosen film's pre-press instructions and check how the fabric responds on a test cap.
 
Place the transfer
In the centre of the front, symmetrically to the seam; tack the edges with heat tape if needed.
 
Key step
Press
Use the temperature, time and pressure specified in the chosen film's instructions.
 
Peel the film
Hot or after cooling — as stated for your film.
 
Cool the cap
Let the cap cool completely, front up, before packing.
Tip: Test the first piece; peel according to the film instructions and check adhesion around every edge, especially on both sides of the centre seam. Note the setting that worked; change one setting at a time.

Cotton caps: which to choose

 
VariantFeatureHead sizeStrap
Kids Vintage six-panel cap, greenYou are herewashed cotton with a worn effect51 cmmetal buckle
Vintage six-panel cap, yellowwashed cotton with a worn effect56 cmmetal buckle
Kids cotton five-panel cap, whiteseamless front, for childrenkids sizemetal buckle

Where it works best

 
A gift for a child
A cap with a name or a favourite emblem
Camp, club, team
Matching caps with an emblem for a kids' team or camp
Celebration
Caps with lettering and a date for a children's party or graduation

What can go wrong

 
The design lifts at an edge

Cause: possible uneven contact beside the seam, unsuitable settings or an incorrect peel method

Fix: check contact on both sides of the seam, the transfer's suitability for cotton and its application instructions; make a fresh test after correcting the cause
A stripe below the design

Cause: the sweatband stayed under the front

Fix: fold the sweatband out before pressing
The design is crooked

Cause: the cap sat askew on the form

Fix: straighten the cap on the form: the front seam in the middle of the heater
A shiny mark from the heater

Cause: possible overheating or a pressure mark

Fix: check temperature, time, pressure and surface protection against the film instructions; if overheating is confirmed, reduce one setting within the permitted limits on a fresh test cap

Questions and answers

 

Can I print it with sublimation?

No: sublimation ink bonds with polyester, and this cap is cotton. For sublimation, choose a kids trucker cap with a white polyester front.

What do I apply the logo with?

A DTF transfer or flex on a cap press, or embroidery. DTF gives full colour, flex gives one-colour lettering and numbers.

What size should the design be?

Check the design size by fitting: hold a sheet against the cap and keep the design within the area that lies flat.

What size is the cap?

Head circumference 51 cm, a kids size; for adults there is the same Vintage cap in 56 cm.

What you need

 

A press and materials for applying a logo.

Характеристики Six-blade cap cotton Vintage children's shabby green (12041)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product