Corduroy grey six-bladed cap (10279) - фото 1 - Blanks for sublimation
Corduroy grey six-bladed cap (10279) - фото 2 - Blanks for sublimation
Corduroy grey six-bladed cap (10279) - фото 3 - Blanks for sublimation
  • Corduroy grey six-bladed cap (10279) - фото 1 - Blanks for sublimation
  • Corduroy grey six-bladed cap (10279) - фото 2 - Blanks for sublimation
  • Corduroy grey six-bladed cap (10279) - фото 3 - Blanks for sublimation
  • Corduroy grey six-bladed cap (10279) - фото 1 - Blanks for sublimation
  • Corduroy grey six-bladed cap (10279) - фото 2 - Blanks for sublimation
  • Corduroy grey six-bladed cap (10279) - фото 3 - Blanks for sublimation

Corduroy grey six-bladed cap (10279)

(0)
Color: Gray
Material:
In stock
Price:
212.00 грн
  • The date of shipment of the goods: 2026-11-23
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Corduroy grey six-bladed cap (10279)

A corduroy cap for DTF, flex and embroidery

 

Create a corduroy cap with a logo or lettering — for merch, a team or a gift.

For DTF and flexon a cap heat press
6 panelsseam down the centre of the front
56 cmhead circumference
Metal bucklethe strap adjusts the fit at the back

Is this cap right for you

 
You apply logos with a DTF transfer or flex on a cap heat press
You embroider on a machine with a cap frame
Corduroy ribs are uneven: press DTF and flex with a pillow under the front and firm, even pressure, and lay a water-soluble topping on top for embroidery
You need full-colour sublimation printing — take the suede five-panel cap with a white front for sublimation

Sizes and decoration area

 
Corduroywide ribs along the panels and on the visor
Curved visorcorduroy, in the cap colour
5–9 cmguide to the transfer width at the centre of the front
75/11sharp needle for embroidery

The DTF or flex settings come from the film card and the embroidery limit from your machine's cap frame; run a test on the same cap before a production run.

Why this cap

 

Corduroy texture

The ribs show on every panel and on the visor, so the cap looks distinctive even with a small logo

12 colours

From white and beige to burgundy and khaki — to match a brand or team palette

How to apply a logo

 
 
Prepare the transfer
A DTF transfer or cut flex sized to the front; a guide is 5–9 cm wide at the centre.
 
Add a pillow
Fit the cap on the cap platen with a pillow under the front so the pressure lands on the whole design, not on the seam and visor.
 
Press evenly
The ribs are uneven: apply firm, even pressure so the film reaches both the ridges and the grooves.
 
Key step
Press
Settings from the film card; make the first cap a test piece.
 
Check the test cap
Make sure the film has bonded between the ribs. The texture may show through the design; assess the result on the test cap before starting the run.
 
Or embroider
On a machine with a cap frame: a water-soluble topping on top so the stitches do not sink into the ribs, solid fills on wide wale and a sharp 75/11 needle.
Tip: Keep the settings that worked on the test cap for the production run; change one setting at a time.

Corduroy and suede caps: which to choose

 
VariantMaterialPanelsStrap
Corduroy, greyYou are hereCorduroy6 panelsMetal buckle
Corduroy, blackCorduroy6 panelsMetal buckle
Corduroy, whiteCorduroy6 panelsMetal buckle
Corduroy, beigeCorduroy6 panelsMetal buckle

Where it works best

 
Merch with a warm look
A logo on corduroy caps in several colours
Coffee shops and craft brands
A small logo or lettering on a textured cap
A gift
A name or short line on a cap in a favourite colour

What can go wrong

 
The film did not bond in the grooves

Cause: weak or uneven pressure

Fix: a pillow under the front, firm even pressure, settings from the film card
Stitches sink into the ribs

Cause: no topping

Fix: a water-soluble topping on top, solid fills on wide wale
The transfer lifts at the seam

Cause: uneven pressure on the centre seam

Fix: a pillow under the front, the design within one panel or the seam supported
Needles break

Cause: the point deflects on the seam and the dense front

Fix: a sharp 75/11 needle

Questions and answers

 

Can I print this cap with sublimation?

This model is made for heat transfer and embroidery. For full-colour sublimation, choose a cap made for it, such as the suede five-panel cap with a white front.

What settings for DTF or flex?

Use the settings from the chosen film's card. On corduroy the key is firm, even pressure with a pillow under the front so the film also reaches the grooves; make the first cap a test piece.

Can it be embroidered?

Yes, on a machine with a cap frame. Lay a water-soluble topping on top so the stitches do not sink into the ribs, choose solid fills and a sharp 75/11 needle; on the centre seam run fills at an angle to it.

What size is the cap?

Head circumference 56 cm, an adult size; a strap with a metal buckle at the back adjusts the fit.

What you need

 

Equipment and materials for the decoration method you choose.

Характеристики Corduroy grey six-bladed cap (10279)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product